Metal Drill Bits

This high speed taper drill has two-flute cutting edges which drill and enlarge the holes in ferrous and non-ferrous metals up to 2mm thick. A 1/4 in hexagonal shank enables use in both power drills or screwdrivers.

Size Range: 3-14mm.

PTDHLLXT314

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications.

They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.

DIN338RN
BS328
ISO235

PTDGRPDORA100020

Dormer A100 series general purpose HSS jobber drills are suitable for use in the majority of general purpose engineering applications.

They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.

DIN338RN
BS328
ISO235

PTDGRPDORA100164

The Dormer A101 Metric Traditional Flute Ground Jobber Drill Bits are ideal for general machining applications. This HSS drill bit has a left hand spiral and a blue finish (bright below 3mm).

Manufactured to DIN 338 LN / BS328 / ISO 235.

Specification

Flute Geometry: Standard Helix, Left hand spiral.
Point Angle: 118.
Material: High Speed Steel.

PTDGRPDORA101200

The Dormer A120 Metric HSS Stub Drill Bits for general machining applications and is ideal for use in portable drills, turrets and automatic lathes.

Special split-point ensures easy starting and accurate drill location.

PTDGRPDORA1201000

The Dormer A120 Imperial HSS Stub Drill Bits for general machining applications and is ideal for use in portable drills, turrets and automatic lathes.

Special split-point ensures easy starting and accurate drill location.

PTDGRPDORA12018

Dormer A125 HSS Extra Length Drill is a general purpose extra length drill that is ideal for long reach and deep hole applications and capable of drilling up to 10 times its diameter.

PTDGRPDORA125300B

Dormer A200 HSS Centre Drill (DIN 333A) for drilling components that require machining between centres.

Has a 118 point angle with a 60 included countersink.

PTDGRPDORA20031508

Dormer A225 HSS Centre Drill (BS 328) for drilling components that require machining between centres. Has a 120 point angle with a 60 included countersink.

Suitable for both hand and machine use.

PTDGRPDORBS1

A777 Imperial Cobalt Jobber Drill Bits have a heavy-duty, 135 split point for use when greater heat is generated during drilling, e.g on higher tensile tougher materials and in particular the Aerospace Industry.

Specification

Flute Geometry: Standard Helix, Right hand spiral, Thick Web
Point Angle:
0.30 mm - 0.95 mm 118 Conical point
1.00 mm to 1.40 mm inclusive 135 4 facet point
1.50 mm and above 135 split point sizes (Split point geometry to NAS 907 Areospace Specification type P3 Point)

Surface Treatment: Bronze
Material: HSCo Cobalt steel

DIN 338 RN / BS328 / ISO 235

PTDGRPDOR18COB

A777 Metric Cobalt Jobber Drill Bits have a heavy-duty, 135 split point for use when greater heat is generated during drilling, e.g on higher tensile tougher materials and in particular the Aerospace Industry.

Specification

Flute Geometry: Standard Helix, Right hand spiral, Thick Web
Point Angle:
0.30 mm - 0.95 mm 118 Conical point
1.00 mm to 1.40 mm inclusive 135 4 facet point
1.50 mm and above 135 split point sizes (Split point geometry to NAS 907 Areospace Specification type P3 Point)

Surface Treatment: Bronze
Material: HSCo Cobalt steel

DIN 338 RN / BS328 / ISO 235

PTDGRPDOR300COB

The Faithfull Imperial HSS Drill Bit Sets are designed for cutting metal, however they are also suitable for drilling holes in timber, chipboard and plywood. The sets have an easy flip open action case with transparent front for easy checking of contents.

Manufactured to meet DIN 338 standard.

7 Piece F7PSET: 1/16, 3/32, 1/8, 5/32, 3/16, 7/32 and 1/4in.

13 Piece F13PSET: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64 and 1/4in.

This set contains commonly used sizes from the imperial range. Although designed for cutting metal, HSS drills are also suitable for drilling holes in timber, chipboard and plywood.

The robust plastic case secures and protects the drills when they are stored with other tools. The contents can easily be viewed through the flip action transparent lid.

Manufactured to meet DIN 338 standard.

No. of drills: 7

Sizes: 1/16, 3/32, 1/8, 5/32, 3/16, 7/32 & 1/4in

PTDFAIF7PSET

The Faithfull Imperial HSS Drill Bit Sets are designed for cutting metal, however they are also suitable for drilling holes in timber, chipboard and plywood. The sets have an easy flip open action case with transparent front for easy checking of contents.

Manufactured to meet DIN 338 standard.

7 Piece F7PSET: 1/16, 3/32, 1/8, 5/32, 3/16, 7/32 and 1/4in.

13 Piece F13PSET: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64 and 1/4in.

This set contains commonly used sizes from the imperial range. Although designed for cutting metal, HSS drills are also suitable for drilling holes in timber, chipboard and plywood.

The robust plastic case secures and protects the drills when they are stored with other tools. The contents can easily be viewed through the flip action transparent lid.

Manufactured to meet DIN 338 standard.

No. of drills: 13

Sizes: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64 & 1/4in

PTDFAIF13PSET

The Faithfull Metric HSS Drill Bit Sets are designed for cutting metal, however they are also suitable for drilling holes in timber, chipboard and plywood. The sets have an easy flip open action case with transparent front for easy checking of contents.

Manufactured to meet DIN 338 standard.

7 Piece M7PSET: 1.5, 2, 3, 4, 5, 5.5 and 6mm.
13 Piece M13PSET: 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.2, 4.5, 5, 5.5, 6 and 6.5mm.

PTDGRPFAIM13PSET

The Faithfull Metric HSS Drill Bit Sets are designed for cutting metal, however they are also suitable for drilling holes in timber, chipboard and plywood. The sets have an easy flip open action case with transparent front for easy checking of contents.

Manufactured to meet DIN 338 standard.

7 Piece M7PSET: 1.5, 2, 3, 4, 5, 5.5 and 6mm.
13 Piece M13PSET: 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.2, 4.5, 5, 5.5, 6 and 6.5mm.

This set contains commonly used sizes from the metric range. Although designed for cutting metal, HSS drills are also suitable for drilling holes in timber, chipboard and plywood.

The robust plastic case secures and protects the drills when they are stored with other tools. The contents can easily be viewed through the flip action transparent lid.

Manufactured to meet DIN 338 standard.

No. of drills: 7

Sizes: 1.5, 2, 3, 4, 5, 5.5, 6mm

PTDFAIM7PSET