Wood Drill Bits
- Faithfull TCT Hinge Boring Bit Range
The Faithfull Hinge Boring Bit with a Tungsten Carbide cutter is designed for repetitive drilling of blind holes when fitting concealed (blum) hinges in kitchen, bedroom and bathroom cabinet doors. They are suitable for use on all natural woods and man-made materials such as block board, melamine faced boards, chipboard and MDF and provide a long working life.
These bits should always be used with a stand-mounted drill.
Solid carbide tipped centre point
Solid carbide main cutter
Relief angle to reduce drag
5/16in - 8mm shank
PTDGRPFAIHBB26Learn MoreBahco 9526 Combination Auger Bit Range
Bahco 9526 Combination Auger Bits are dual-purpose and can be used in both electric power drills and hand braces. With a single cutting edge for easy regrinding, though the need for regrinding is reduced as it is made from hardened tool steel for a longer cutting life.
The threaded tip moderates a self-feed when using a power drill, but still sufficient self-feed when used in a hand brace. For quick precision cutting with all types of wood.
PTDGRPBAH95266Learn MoreBahco 9525 Extensions for 9529 Flat Bits Range
Bahco Flat Bit Extension Shaft is hardened and ground, lacquered for rust protection, and features two locking screws. One hexagonal key for fastening is included with each extension shaft.
PTDGRPBAH9525SLearn MoreDeWalt Flatwood Drill Bit Range
The DEWALT high quality chrome vanadium flat drill bit range feature a ground central point and cutting edges for accurate location and clean cutting. They also have a ground chip breaker to reduce splintering providing relatively clean holes and improved drilling efficiency.
This flatwood range accommodate the following applications:
For rapid drilling of holes in wood.
Suitable for natural hard and soft wood, chipboard and other man made materials.
Ideal for door locks, mortising, electrical and plumbing work.
PTDGRPDEWDT4810QZLearn MoreDeWalt Wood Auger Drill Bit Range
The DEWALT Wood Auger Drill Bits have a threaded centre point to aid accurate drilling. The outer cutting spur provides clean holes with less splintering and the drill bits feature a special Lewis spiral flute which allows for fast removal of debris and rapid drilling.
This range of drill bits have the following specifications:
Diameter 6 - 10mm cylindrical shank, Diameters 12 - 32mm hexagonal shank.
Special wood bit for rapid, precise drilling.
Typically used for boring clean precise holes through beams, joists, doors etc.
PTDGRPDEWDT4600QZLearn MoreFaithfull Combination Auger Bits Short Series Range
Faithfull Combination Augers can be used in either a hand or power drill at low speeds. Machined from high quality carbon steel, they feature a pitched screw point for accurate starting with a wide flat spiral for improved stability, straight tracking and fast waste removal. Augers may be used in timber, plywood, MDF and blockwood and can be resharpened using a hand file.
Short series or stubby auger bits are for use in confined spaces, such as between joists.
Overall Length: 120mm.
PTDGRPFAICA10SLearn MoreDeWalt Brad Point Wood Drill Bit Range
The DEWALT Brad Point Drill bits are manufactured from chrome vanadium alloyed steel. A centre location point and outer cutting spurs ensure clean accurate holes.
For diameters 11mm and above, the shank is reduced to 9.5mm. Brad point drill bits are suitable for drilling hardboard, plywood, chipboard and all natural hard and softwood.
PTDGRPDEWDT4503QZLearn MoreBahco 9527-CA Long Combination Auger Bit Range
Bahco Long Combination Auger Bit, these are dual-purpose and can be used in hand braces and power drills. Designed to quickly drill accurate, very clean holes in awkward to reach spots or through heavy-section timbers.
The auger bits are lacquered for protection against rust.
Overall length: 400mm.
PTDGRPBAH95276Learn MoreFaithfull Combination Auger Bits Long Series Range
Faithfull Long Series Combination Auger Bits can be used in either a hand or power drill at low speeds. Machined from high quality carbon steel, they feature a pitched screw point for accurate starting with a wide flat spiral for improved stability, straight tracking and fast waste removal. Augers may be use in timber, plywood, MDF and blockwood and can be resharpened using a hand file.
Extra long series for deep boring.
Overall Length: 400mm.
PTDGRPFAICA6LLearn MoreFaithfull Combination Auger Bits Standard Series Range
Faithfull Combination Wood Auger Bits can be used in either a hand or power drill at low speeds. Machined from high quality carbon steel, they feature a pitched screw point for accurate starting with a wide flat spiral for improved stability, straight tracking and fast waste removal. Augers may be used in timber, plywood, MDF and blockwood and can be resharpened using a hand file.
PTDGRPFAICA6Learn MoreBahco 9528 Expansive Bit Range
Bahco Expansive Bits are capable of drilling a wide range of shallow hole sizes in wood.
The MD series have round shanks and are suitable for use with power tools.
Made from a single-piece of drop forged steel. Head and adjustable cutters hardened and tempered. Locking screw zinc plated with hexagonal head with slot.
With expansive bits it is possible to drill a full range of diameters with the same bit, in wood. Adjustable with screwdriver or wrench.
PTDGRPBAH9528SLearn MoreBahco 9531 Long Flat Bit Range
The Bahco Long Flat Bit is a top quality flat bit with an extended shaft, useful for reaching awkward spots or for drilling accurate, deep holes into wood.
PTDGRPBAH95316Learn MoreBahco 9529 Flat Bit Range
The 9529 Flat Bit has a positive cutting angle which drills holes twice as fast and lasts three times longer than a conventional bit.
The winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance.
PTDGRPBAH95296Learn MoreFaithfull Flat Bit Range
Faithfull Flat bits are designed to perform fast, clean cuts, will bore all types of timber and are equally efficient when drilling with or against the grain. All bits have a precision ground point and cutting surfaces with extended spurs for faster cutting. All sizes except the 6mm have a non-slip hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. A 300mm extension shank is available for use with flat bits of 16mm and above, for deep drill applications. Ideal for use with both mains or cordless drills
Made to DIN 3126 quality with 1/4in hexagonal non-slip shaft.
PTDGRPFAIFB6Learn MoreFaithfull Lip & Spur Wood Drill Bit Range
The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.
PTDGRPFAIWDB30Learn MoreWood Drill Bits
VAT Number: 100 5143 84