Tool Accessories

Disston Screwdiggers fulfil the same function as Screwsinks but the countersinking part can be slid up and down the drill part of the tool.

Ideal for drilling, countersinking and counterboring in one operation.

This means that a No.8 Screwdigger can be adjusted to predrill for different lengths of No. 8 Screw.

Uses 7/64in Drill Bit.

To ensure an acurate fit we suggest you use the same Plug Cutter from the Disston brand.

For No 8 screw

PTDDIS5208

Disston Screwdiggers fulfil the same function as Screwsinks but the countersinking part can be slid up and down the drill part of the tool.

Ideal for drilling, countersinking and counterboring in one operation.

This means that a No.10 Screwdigger can be adjusted to predrill for different lengths of No. 10 Screw.

Uses 1/8in Drill Bit.

To ensure an acurate fit we suggest you use the same Plug Cutter from the Disston brand.

For No 10 screw

PTDDIS5209

Disston Screwdiggers fulfil the same function as Screwsinks but the countersinking part can be slid up and down the drill part of the tool.

For No 12 screw

PTDDIS5210

Disston Screwdiggers fulfil the same function as Screwsinks but the countersinking part can be slid up and down the drill part of the tool.

PTDGRPDIS5207

The RemGrit Holesaw is a carbide grit edged holesaw designed to cut extremely hard or abrasive materials including ceramic tiles, laminates, MDF, marble,slate, glass fibre and virtually any material that does not form a chip.

It cuts cast iron, ceramic tiles, laminates, composition board, marble, slate, glass fibre, asbestos. Totally interchangeable with all other American Pattern Holesaws.

Maximum Cutting Depth: 29mm.

PTDGRPDISGRIT19

Disston Arbors with a carbide tipped pilot drill for use with RemGrit holesaws. Designed to drill hard and abrasive materials including ceramic tiles, laminates, MDF, marble, slate and glass fibre.

PTDGRPDISG05519CT

Plug Cutters are used for cutting wood plugs to cover recessed screw holes to achieve a neat finish. For a perfect grain match use an offcut from the timber being plugged.

To ensure an accurate fit we suggest you use the same screw digger from the Disston brand.

PTDGRPDIS5594

The RemGrit Holesaw is a carbide grit edged holesaw designed to cut extremely hard or abrasive materials including ceramic tiles, laminates, MDF, marble,slate, glass fibre and virtually any material that does not form a chip.

It cuts cast iron, ceramic tiles, laminates, composition board, marble, slate, glass fibre, asbestos. Totally interchangeable with all other American Pattern Holesaws.

Maximum Cutting Depth: 29mm.

Disston G013m RemGrit Holesaw 20mm

PTDDISGRIT20

The RemGrit Holesaw is a carbide grit edged holesaw designed to cut extremely hard or abrasive materials including ceramic tiles, laminates, MDF, marble,slate, glass fibre and virtually any material that does not form a chip.

It cuts cast iron, ceramic tiles, laminates, composition board, marble, slate, glass fibre, asbestos. Totally interchangeable with all other American Pattern Holesaws.

Maximum Cutting Depth: 29mm.

Disston G012 RemGrit Holesaw 19mm

PTDDISGRIT19

The RemGrit Holesaw is a carbide grit edged holesaw designed to cut extremely hard or abrasive materials including ceramic tiles, laminates, MDF, marble,slate, glass fibre and virtually any material that does not form a chip.

It cuts cast iron, ceramic tiles, laminates, composition board, marble, slate, glass fibre, asbestos. Totally interchangeable with all other American Pattern Holesaws.

Maximum Cutting Depth: 29mm.

G014 Remgrit Holesaw 22mm

PTDDISGRIT22

The RemGrit Holesaw is a carbide grit edged holesaw designed to cut extremely hard or abrasive materials including ceramic tiles, laminates, MDF, marble,slate, glass fibre and virtually any material that does not form a chip.

It cuts cast iron, ceramic tiles, laminates, composition board, marble, slate, glass fibre, asbestos. Totally interchangeable with all other American Pattern Holesaws.

Maximum Cutting Depth: 29mm.

Disston G016 RemGrit Holesaw 25mm

PTDDISGRIT25

The RemGrit Holesaw is a carbide grit edged holesaw designed to cut extremely hard or abrasive materials including ceramic tiles, laminates, MDF, marble,slate, glass fibre and virtually any material that does not form a chip.

It cuts cast iron, ceramic tiles, laminates, composition board, marble, slate, glass fibre, asbestos. Totally interchangeable with all other American Pattern Holesaws.

Maximum Cutting Depth: 29mm.

Disston G018 Remgrit Holesaw 29mm

PTDDISGRIT29

The RemGrit Holesaw is a carbide grit edged holesaw designed to cut extremely hard or abrasive materials including ceramic tiles, laminates, MDF, marble,slate, glass fibre and virtually any material that does not form a chip.

It cuts cast iron, ceramic tiles, laminates, composition board, marble, slate, glass fibre, asbestos. Totally interchangeable with all other American Pattern Holesaws.

Maximum Cutting Depth: 29mm.

Disston G020 RemGrit Holesaw 32mm

PTDDISGRIT32

The RemGrit Holesaw is a carbide grit edged holesaw designed to cut extremely hard or abrasive materials including ceramic tiles, laminates, MDF, marble,slate, glass fibre and virtually any material that does not form a chip.

It cuts cast iron, ceramic tiles, laminates, composition board, marble, slate, glass fibre, asbestos. Totally interchangeable with all other American Pattern Holesaws.

Maximum Cutting Depth: 29mm.

Disston G022 RemGrit Holesaw 35mm

PTDDISGRIT35

The RemGrit Holesaw is a carbide grit edged holesaw designed to cut extremely hard or abrasive materials including ceramic tiles, laminates, MDF, marble,slate, glass fibre and virtually any material that does not form a chip.

It cuts cast iron, ceramic tiles, laminates, composition board, marble, slate, glass fibre, asbestos. Totally interchangeable with all other American Pattern Holesaws.

Maximum Cutting Depth: 29mm.

Disston G024 Remgrit Holesaw 38mm

PTDDISGRIT38