Tool Accessories

Dormer A130 HSS Taper Shank Drill for general purpose drilling applications. Has thinner web which minimises thrust requirements without compromising strength.

Manufactured to: DIN 345RN/BS328/ISO 235.

PTDGRPDORA1301116

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications.

They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.

DIN338RN
BS328
ISO235

PTDGRPDORA100020

Dormer A100 series general purpose HSS jobber drills are suitable for use in the majority of general purpose engineering applications.

They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.

DIN338RN
BS328
ISO235

PTDGRPDORA100164

The Dormer A101 Metric Traditional Flute Ground Jobber Drill Bits are ideal for general machining applications. This HSS drill bit has a left hand spiral and a blue finish (bright below 3mm).

Manufactured to DIN 338 LN / BS328 / ISO 235.

Specification

Flute Geometry: Standard Helix, Left hand spiral.
Point Angle: 118.
Material: High Speed Steel.

PTDGRPDORA101200

The Dormer A120 Metric HSS Stub Drill Bits for general machining applications and is ideal for use in portable drills, turrets and automatic lathes.

Special split-point ensures easy starting and accurate drill location.

PTDGRPDORA1201000

The Dormer A120 Imperial HSS Stub Drill Bits for general machining applications and is ideal for use in portable drills, turrets and automatic lathes.

Special split-point ensures easy starting and accurate drill location.

PTDGRPDORA12018

Dormer A125 HSS Extra Length Drill is a general purpose extra length drill that is ideal for long reach and deep hole applications and capable of drilling up to 10 times its diameter.

PTDGRPDORA125300B

Dormer A200 HSS Centre Drill (DIN 333A) for drilling components that require machining between centres.

Has a 118 point angle with a 60 included countersink.

PTDGRPDORA20031508

Dormer G136 HSS Straight Shank 90 Countersink for production of 90 countersinks in most materials, which can also be used as a de-burring tool.

Has a bright finish, 3 flute, ground all over.

Other types available on request (MTS, 60/82/100, Coated).

PTDGRPDORG136800

The Dormer A002 Metric HSS-TiN Coated Jobber Drill Bits in Pouch Packs. Each bit has a pointed web and fluted tip design. The point design allows for efficient cutting, with a reduced axial force and allows for accurate centring. The web design provides optimised strength, rigidity and improves the feed of the drilling bit. The flutes allows for efficient chip form and evacuation.

The bits have visible, tool in-situ marking that allows for easy identification. The optimised helix angle provides greater stiffness across the diameter range. The bright body improves cutting performance on ductile materials, and the Titanium Nitride coating resists flank and crater wear, and has low friction that allows for increased cutting speeds.

Dormer A002 HSS-TiN Coated Jobber Drill 10.00mm.
Pouch of 1.

Tip Diameter: 10.00mm.
Working Length: 87mm.
Overall Length: 133mm.

PTDDORA002S100

The Dormer A002 Metric HSS-TiN Coated Jobber Drill Bits in Pouch Packs. Each bit has a pointed web and fluted tip design. The point design allows for efficient cutting, with a reduced axial force and allows for accurate centring. The web design provides optimised strength, rigidity and improves the feed of the drilling bit. The flutes allows for efficient chip form and evacuation.

The bits have visible, tool in-situ marking that allows for easy identification. The optimised helix angle provides greater stiffness across the diameter range. The bright body improves cutting performance on ductile materials, and the Titanium Nitride coating resists flank and crater wear, and has low friction that allows for increased cutting speeds.

Dormer A002 HSS-TiN Coated Jobber Drill.
Pouch of 1.

Tip Diameter: 10.20mm.
Working Length: 87mm.
Overall Length: 133mm.

PTDDORA002S102

The Dormer A002 Metric HSS-TiN Coated Jobber Drill Bits in Pouch Packs. Each bit has a pointed web and fluted tip design. The point design allows for efficient cutting, with a reduced axial force and allows for accurate centring. The web design provides optimised strength, rigidity and improves the feed of the drilling bit. The flutes allows for efficient chip form and evacuation.

The bits have visible, tool in-situ marking that allows for easy identification. The optimised helix angle provides greater stiffness across the diameter range. The bright body improves cutting performance on ductile materials, and the Titanium Nitride coating resists flank and crater wear, and has low friction that allows for increased cutting speeds.

Dormer A002 HSS-TiN Coated Jobber Drill 10.50mm.
Pouch of 1.

Tip Diameter: 10.50mm.
Working Length: 87mm.
Overall Length: 133mm.

PTDDORA002S105

The Dormer A002 Metric HSS-TiN Coated Jobber Drill Bits in Pouch Packs. Each bit has a pointed web and fluted tip design. The point design allows for efficient cutting, with a reduced axial force and allows for accurate centring. The web design provides optimised strength, rigidity and improves the feed of the drilling bit. The flutes allows for efficient chip form and evacuation.

The bits have visible, tool in-situ marking that allows for easy identification. The optimised helix angle provides greater stiffness across the diameter range. The bright body improves cutting performance on ductile materials, and the Titanium Nitride coating resists flank and crater wear, and has low friction that allows for increased cutting speeds.

A002 HSS-TiN Coated Jobber Drill 11.0mm.
Pouch of 1.

Tip Diameter: 11.0mm.
Working Length: 87mm.
Overall Length: 133mm.

PTDDORA002S110

The Dormer A002 Metric HSS-TiN Coated Jobber Drill Bits in Pouch Packs. Each bit has a pointed web and fluted tip design. The point design allows for efficient cutting, with a reduced axial force and allows for accurate centring. The web design provides optimised strength, rigidity and improves the feed of the drilling bit. The flutes allows for efficient chip form and evacuation.

The bits have visible, tool in-situ marking that allows for easy identification. The optimised helix angle provides greater stiffness across the diameter range. The bright body improves cutting performance on ductile materials, and the Titanium Nitride coating resists flank and crater wear, and has low friction that allows for increased cutting speeds.

Dormer A002 HSS-TiN Coated Jobber Drill 11.50mm.
Pouch of 1.

Tip Diameter: 11.50mm.
Working Length: 94mm.
Overall Length: 142mm.

PTDDORA002S115

The Dormer A002 Metric HSS-TiN Coated Jobber Drill Bits in Pouch Packs. Each bit has a pointed web and fluted tip design. The point design allows for efficient cutting, with a reduced axial force and allows for accurate centring. The web design provides optimised strength, rigidity and improves the feed of the drilling bit. The flutes allows for efficient chip form and evacuation.

The bits have visible, tool in-situ marking that allows for easy identification. The optimised helix angle provides greater stiffness across the diameter range. The bright body improves cutting performance on ductile materials, and the Titanium Nitride coating resists flank and crater wear, and has low friction that allows for increased cutting speeds.

Dormer A002 HSS-TiN Coated Jobber Drill 12.00mm Pouch of 1 OL:151mm WL:101mm

Tip Diameter: 12.00mm.
Working Length: 101mm.
Overall Length: 151mm.

PTDDORA002S120