Tool Accessories

The Faithfull FAIGDSET4 is for drilling glass windows, mirrors, bottles and ceramics - for use in variable speed drills only.

These drillbits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only.

Note: Lubricate with water for best results

The Faithfull FAIGDSET4 is a set of 4 glass drills in a plastic case and comes in the following sizes: 3, 4, 5 and 6mm.

PTDFAIGDSET4

Compressed composite wood biscuits for jointing. The Faithfull wood biscuits are available in 3 sizes. FSC certified.

The Faithfull FAIDOWBIS0 wood biscuits come in a tub of 150, size no. 0.

Dimensions: 47mm x 15mm

PTDFAIDOWBIS0

Compressed composite wood biscuits for jointing. The Faithfull wood biscuits are available in 3 sizes. FSC certified.

PTDGRPFAIDOWBIS0

The Faithfull FAIPINKEY adjustable pin key is for use with locknuts on angle grinders when fitting or removing abrasive discs. It is a fully adjustable pin wrench from 15 to 52mm with a pin diameter 4mm. The stepped spanner handle can be used to undo nuts from 10 to 19mm.

The FAIPINKEY is an ideal replacement pin wrench for most angle grinders, bench grinders, mitre saws and circular saws.

PTDFAIPINKEY

The Faithfull Vitrified grinding wheels are suitable for use on most types of bench grinder. White wheels are ideal for the general purpose grinding of ferrous metals but they are particularly suited for the sharpening of cutting tools such as chisels and plane irons. These wheels help keep your tools cooler to avoid overheating and weakening the cutting edge.

Supplied with bore reducing bushes and will fit bench grinders

The Faithfull FAIGW15020WG is a 150mm x 20mm wheel and is supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:
31.75mm
19.05mm
15.88mm
12.77mm

PTDFAIGW15020WG

A boxed selection of 36 grinding wheels of assorted sizes and grits with a 1/4in shank to suit most electrical and cordless drills. They are ideal for sharpening and grinding steel, and the pack contains six each of the following.

77 mm Dia. X 12 mm Fine
50 mm Dia X 12 mm Fine
37 mm Dia X 24 mm Fine
65 mm Dia X 6 mm Coarse
50 mm Dia X 6 mm Fine
15 mm Dia X 24 mm Coarse

SAFETY TIP
Faithfull grinding wheels are for use in power or cordless drills only and are not suitable for use in die grinder or high speed air tools.

PTDFAIGWA36

These Faithfull brushes have nylon bristles for use on wood, metal and stone. Many times the life of a wire brush. Conform to ISO 9001 and DIN EN1083-1 and 2.

The 6mm shank enables them to be used with a power tool with a maximum of 4500rpm.

The Faithfull FAIWBN65 Nylon cup brush has the following dimensions:
Size: 65mm diameter x 6mm shaft x 1.5mm bristle.

PTDFAIWBN65

A set of four bushes to allow Faithfull bench grinding wheels to be fitted to various bench grinding machines. Each bush consists of two parts for inserting into each side of the grinding wheel. Smaller bushes fit into the larger sized bushes to step down the bore size.

Reduces a 31.75mm bore to fit the following shaft sizes: 25.4mm, 19.05mm, 15.88mm and 12.7mm

PTDFAIGWPB127

Faithfull TCT Cross Cut Mitre Saw Blade has a hard steel body and industrial quality tungsten carbide steel teeth for a top performance. Especially designed for use on cross cutting mitre saws with its triple chip tooth grinding and negative rake it is the perfect blade for cutting both hard and soft woods, laminated materials and aluminium.

Specification

Blade Diameter: 216mm.
Bore: 30mm.
Teeth: 60.
Rake: NEG.

PTDFAIZ21660ATB

The Faithfull Multi-Sander Sheets are made from aluminium oxide E-weight heavy-duty paper with hook and loop quick change system. For use with Black and Decker Multi-Sander.

Size: 106 x 175mm.

PTDGRPFAIAOMULTIA

These Faithfull high-performance, tungsten carbide tipped drill bits fit into SDS Plus chucks which provide a particularly secure, non-slip grip, that transmits maximum power for rotary percussion drilling, mainly into concrete.

The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick-release keyless chuck.

The drill bits are suitable for use in bricks, blocks, concrete containing aggregates, marble, hard stone and other hard masonry materials.

The Faithfull FAISDS6310 SDS Drill has the following dimensions:
Diameter: 6mm
Working Length: 250mm
Overall length: 310mm

PTDFAISDS6310

Faithfull Point Steels are produced to provide high-performance in all types of modern large capacity drilling and hammer drilling machines. Manufactured using traditional forging skills such as hammer work on chisels and drop stamp forging of cutting blades, they fit the most popular 21mm Hex shank machines used in the UK.

Type: Point.
Length: 450mm.
Fitting: 21mm Hex shank, Kango (900/950K).

PTDFAIKAGP450

Clean and precise straight down cutting blade, ideal for hardwood, softwood,laminated boards, fibre boards and plastics.

Type: Carbon Steel (T shaft)

Cutting length: 75mm

TPI: 10

Qty: Pkt 5

PTDFAIJBT101BR

Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up.

Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand.

All the blades in this range fit most popular makes of power machines.

This Faithfull TCT Circular Saw Blade has the following specification:

Application: Fast Rip.
Blade Diameter: 140mm.
Bore: 20mm.
Teeth: 16.
Bush: 16 & 13mm.
Rake: POS.

PTDFAIZ14016

Faithfull Bi-Metal Cobalt Holesaws with precision set teeth for aggressive material penetration and swarf clearance. This also provides a smooth, fast cutting action. Manufactured from bi-metal material with a 8% cobalt content for increased heat and wear resisitance for greater product life.

Will cut thin and thick guage materials. Ideal for use on a wide variety of materials including: stainless steel, steel, aluminium, sheet metal, mild metal, non-ferrous metals, cast iron, soft/hard wood and PVC.

Suitable for use in most variable speed power drills.

Specification

Cutting Depth: 38mm

Diameter: 54mm

PTDFAIHSVP54