Tool Accessories

The Makita P-90364 PRO Accessory Kit contains a selection of accessories designed for the professional user. Contains:

8 x 25mm Phillips Bits: PH0, PH1(x2), PH2(x3), PH3(x2)
5 x 25mm Pozi Bits: PZ1, PZ2(x3), PZ3
10 x 25mm TORX Bits: TX8, TX10, TX15(x2), TX20(x2), TX25, TX27, TX30, TX40
9 x 25mm Hex Bits: H3(x2), H4(x2), H5(x2), H6(x2), H7
8 x 25mm Slotted Bits: 3mm, 4mm(x2), 5mm, 5.5mm, 6mm, 6.5mm, 7mm

3 x 50mm Phillips Bits: PH1, PH2, PH3
3 x 50mm Pozi Bits: PZ1, PZ2, PZ3
7 x 50mm TORX Bits: TX10, TX15, TX20, TX25, TX27, TX30, TX40
4 x 50mm Hex Bits: H3, H4, H5, H6
3 x 50mm Slotted Bits: 4mm, 5.5mm, 6.5mm

13 x TiN Coated HSS Metal Drill Bits: 3mm(x2), 3.5mm, 4mm(x2), 4.5mm, 5mm(x2), 5.5mm, 6mm, 6.5mm, 7mm, 8mm

6 x Brad Point Drill Bits: 3, 4, 5, 6, 7, 8mm
6 x Masonry Bits: 5, 5.5, 6, 6.5, 7, 8mm
3 x Flat Bits: 12, 16, 22mm

7 x Nutdriver Hex Sockets 7, 8, 9, 10, 11, 12, 13mm
1 x Countersink
1 x Bit Holding Screwdriver Handle
4 x Drill Stoppers: 6, 8, 10, 12
1 x Drill Gauge
1 x 2.5mm Hexagon Key
1 x 80mm Magnetic Bit Holder
1 x Carry Case

PTDMAKP90364

The Makita B-28597 Torsion Bit Set contains a selection of Impact Gold Bits made from high strength Tarata Steel that deliver 10x longer life than a regular screw bit. When coupled with an Impact Gold Torsion Bit Holder it can last up to 15x longer.

Impact Gold Extreme Torsion Technology is a unique design which focuses the forces exerted on a regular screw bit away from the tip, meaning less chance of breakage during the most vigorous of impact applications.

Supplied in a slide open, click closed carrier. Contents:

3 x Phillips Bits: PH1, PH2 & PH3

3 x Pozi Bits: PZ1, PZ2 & PZ3

4 x TORX Bits: T15, T20, T25 & T30

1 x 75mm Torsion Bit Holder

PTDMAKB28597

The Makita D-18699 Metal Cutting Wheel can be used to cut sheet steel and steelwork. Suitable for metal cutting only.

Specification:

Diameter: 230mm
Thickness: 2.5mm
Bore: 22.23mm
Grit: A30S
Centre Type: Flat

PTDMAKD18699

The Makita B29 Jigsaw Blades are ideal for scroll cutting (finishing) of wood and plastics. Symmetrical head-geometry with centring-tip for optimised results in the event of reinforcement.

Application: Jigsaws Scroll cutting

Specification

Capacity: Plywood/Plastic: 2-35mm
ID Code: B-29
Tooth Type/Set: Ground and Taper Ground Teeth
Tooth Spacing: 1.6mm
TPI: 16
Shank: Universal
Overall Length: 42mm

PTDMAKA80400

The Makita B13 Jigsaw Blades are ideal for general cutting of wood and plastics. Designed as an economical blade without compromising cutting performance.

Application: Woodworking, Joinery & Jigsaws.

Specification

Capacity: Plywood/Plastic: 4-65mm
ID Code: B-13
Tooth Type/Set: Milled and Side Set Teeth
Tooth Spacing: 3.2mm
TPI: 8
Shank: Universal
Overall Length: 80mm

PTDMAKA85656

The Makita Specialized Circular Saw Blade for wood cutting with the most popular cordless circular saw models. With ultra-thin, perfectly tensioned steel plates for true run. Made from precision-honed, high-grade carbide for easy, smooth cuts and long life.

The Makita B-09173 Circular Saw Blade is made especially for the BSS610 Cordless Saw.

PTDMAKB09173

The Makita D-54081 HSS Drill Bit Set with highly efficient HSS-R drill bits suitable for drilling applications in steel and cast-steel alloyed and unalloyed up to 900N/mm tensile strength. Also suitable for: grey cast, malleable cast iron, die-cast metal, iron sinter, nickel-silver, graphite cast iron, short chipping aluminium alloys, bronze, brass and hard plastics.

Contains the following:

Sizes: 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 7.5mm, 8mm, 8.5mm, 9mm, 9.5mm & 10mm.

PTDMAKD54081

The Makita D-54097 HSS-R Bit Set is suitable for drilling applications in steel and cast-steel alloyed and unalloyed up to 900N/mm tensile strength. Other materials include: grey cast, malleable cast iron, die-cast metal, iron sinter, nickel-silver, graphite cast iron, short chipping aluminium alloys, bronze, brass and hard plastics.

Conforms to DIN 338 Standards.

Sizes: 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 7.5mm, 8mm, 8.5mm, 9mm, 9.5mm, 10mm, 10.5mm, 11mm, 11.5mm, 12mm, 12.5mm & 13mm.

PTDMAKD54097

Makita Pozidriv Impact Bits are produced to Makitas high-quality standard using special S2 alloyed steel and a state-of-the-art heat-treatment process. 100% compliant to DIN standards and enables an excellent fit to screwhead. Reduced slippage and damage to screwhead or bit. For regular professional use. Can be used in impact drivers.

Application: screwdriving, cabinet making, joinery, assembly and fixings.

Specification:

Size: PZ2 x 50mm
Pack Quantity: 50

PTDMAKP65779

The Makita P-90015 Masonry Set is supplied in a handy zipped pouch. The bits have a 1/4in Hex Shank. Contains the following:

Sizes: 5mm, 5.5mm, 6mm, 7mm(2), 8mm, 10mm.

PTDMAKP90015

47 Piece Makita B-28612 Ratchet & Screwdriver Bit Set, supplied in a high quality ABS case, with a clear cover to see the bits and ratchet whilst keeping them safe and secure. Contains:

6 x 25mm Phillips Bits: PH1(2), PH2(2) & PH3(2).

6 x 25mm Pozi Bits: PZ1(2), PZ2(2) & PZ3(2).

11 x 25mm Torx Bits: TX10(2), TX15(2), TX20(2), TX25(2), TX30(2) & TX40.

6 x 25mm Slotted Bits: 4.5(2), 5.5(2), 6.5mm(2).

9 x 25mm Hex Bits: 2, 2.5, 3, 4(2), 5(2) & 6mm(2).

7 x Nut Spinner 5, 6, 7, 8, 9, 10 & 11mm.

1 x 60mm Magnetic Bit Holder.

1 x Ratchet Screwdriver Bit Holder.

PTDMAKB2861210

Makita Nail Handi-Packs are ideal for the hire industry. Supplied in a plastic tub that can be re-used. The tub is manufactured from freeze grade plastic so it will not become brittle in cold weather.

Manufactured to Eurocode 5/ EN14592 specifications.

1,000 Nails & Gas Cell included.

The Makita P-80830 Nail Handi-Pack has the following specification:

Coating: Galvanised.
Diameter: 3.1mm.
Overall Length: 65mm.
Shank: Ring.
Suits Makita Model: GN900SE.
Pack Quantity: 1000.

PTDMAKP80830

Makita Nail Handi-Packs are ideal for the hire industry. Supplied in a plastic tub that can be re-used. The tub is manufactured from freeze grade plastic so it will not become brittle in cold weather.

Manufactured to Eurocode 5/ EN14592 specifications.

1,000 Nails & Gas Cell included.

The Makita P-80846 Nail Handi-Pack has the following specification:

Coating: Galvanised.
Diameter: 3.1mm.
Overall Length: 76mm.
Shank: Ring.
Suits Makita Model: GN900SE.
Pack Quantity: 1000.

PTDMAKP80846

Makita Nail Handi-Packs are ideal for the hire industry. Supplied in a plastic tub that can be re-used. The tub is manufactured from freeze grade plastic so it will not become brittle in cold weather.

Manufactured to Eurocode 5/ EN14592 specifications.

1,000 Nails & Gas Cell included.

PTDGRPMAKP80830

The Makita P-79158 39 Piece Screwdriver Bit and Ratchet Set has colour coded screwdriver bits for easy recognition with a 1/4in HEX ratchet drive. Contains:

9 x 25mm Torx Bits: 6, 8, 10, 15, 20, 25, 27, 30, 40mm.

6 x 25mm Philips Bits: PH0, PH1, PH2(3), PH3.

6 x 25mm Pozi Bits PZ1, PZ2(4), PZ3.

3 x 25mm Square Bits: 1, 2, 3.

3 x 25mm Slotted Bits: 3.5, 5.5, 8.

9 x 25mm Hex Bits: 1.5, 2, 2.5, 3, 4, 5, 6, 7, 8.

PTDMAKP79158