Tool Accessories

Paslode IM350 Nails have a clipped head with a diamond point for easy insertion. The Galv-Plus finish meets the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor). Specification: Zn / Al alloy approx. 15m. Patented paper strip collation, eliminates paper residue under the nail heads and prevents damage to your Gas Framing Nailer.

Suitable for use with the Paslode IM350 Nailer.

All Paslode nails are CE Marked which guarantees compliance to European regulations.

Smooth or Ring Shank available.

PTDGRPPAS141204

Paslode IM350+ Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells.

FINISH:

All Paslode nails are Chrome 6, cadmium and lead free and are available in five finishes to meet corrosion requirements.

Bright : Economy and bright nails meet the Eurocode 5 requirements for applications in service class 1 (indoor) Specification - No coating.

Galv Plus : Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn / Al alloy approx 15m.

Electro Galv : Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7m.

Hot Dipped Galv : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50m

Stainless Steel: Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.

SHANK:

Smooth Shank : The standard nail, offering high shear value and lowest withdrawal resistance. Fixing across the grain. Fixing into end grain. Clenching applications. Specification - Number of centres will vary with shank diameter.

Unilock Shank : Increases withdrawal resistance. Drives easier than ring shank fixing across the grain. Specification - The ringed parts have 24 rings per inch.

Ring Shank : Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification.

HEAD TYPES :

Round Head : The head area is designed to maximise resistance to the head being pulled through Specification - Head size between 2.0 and 2.5 times wire diameter according to EC5

Clipped Head : Increases number of nails per strip. The head area is designed to maximise resistance to the head being pulled through Specification - Head area corresponding to full round head area, according to EC5

PTDGRPPAS141211

Paslode IM90 Diamond point RounDrive nails have a unique off-centre 34. Made from Chrome 6, cadmium and lead free, with a Hot Dipped Galvanised finish. Meets the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification: Zinc coating minimum 50m. Round head, the head area is designed to maximise resistance to the head being pulled through.

Supplied with Paslode Special Impulse gas fuel cells.

Smooth or Ring Shank avaliable.

PTDGRPPAS142014

Paslode IM65a Brads have an electro galvanised finish, this meets Eurocode 5 requirements for all applications in service class 1 (indoor). Specification: Zn and chromate minimum 7m. The stronger, stiffer 16 gauge nail ensures consistent drivability. 16 gauge size creates smaller hole to provide excellent finishing. Secured with specific glue, designed not to fracture into pieces if accidentally dropped.

Suitable for use with the Paslode Impulse IM65A F16 Angled Nailer.

All Paslode nails are CE Marked which guarantees compliance to European regulations.

PTDGRPPAS300270

Paslode IM65 chisel point brads for Impulse IM65 F16 gas brad nailer. Electro galvanised light duty protection F16 gauge lost head 1.65mm wire brads glued, supplied with Paslode Special Impulse gas fuel cells which drives up to 1,000 brads per cell.

Electro Galv: Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7m.

PTDGRPPAS921585

Paslode IM65 chisel point brads for Impulse IM65 F16 gas brad nailer. Electro galvanised light duty protection F16 gauge lost head 1.65mm wire brads glued, supplied with Paslode Special Impulse gas fuel cells which drives up to 1,000 brads per cell.

Stainless Steel: Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.

PTDGRPPAS921593

Paslode IM350+ Nails offer optimum performance. The bright finish meet the Eurocode 5 requirements for applications in service class 1 (indoor). Specification: No coating.

Suitable for use with the Paslode IM350 Nailer. All Paslode nails are CE Marked which guarantees compliance to European regulations.

Specification:

Finish: Bright
Size: 2.8 x 63mm
Shank: Ring
Pack: Box of 3,300
Number of Fuel Cells: 3

PTDPAS141208

Paslode IM350 Nails have a clipped head with a diamond point for easy insertion. The Galv-Plus finish meets the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor). Specification: Zn / Al alloy approx. 15m. Patented paper strip collation, eliminates paper residue under the nail heads and prevents damage to your Gas Framing Nailer.

Suitable for use with the Paslode IM350 Nailer.

All Paslode nails are CE Marked which guarantees compliance to European regulations.

Smooth or Ring Shank available.

These Paslode IM360 Nails have the following specification:

Finish: Galv-Plus
Size: 2.8 x 63mm
Shank: Ring
Pack: Box of 3,300
Number of Fuel Cells: 3

PTDPAS141210

Paslode IM350+ Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells.

All Paslode nails are Chrome 6, cadmium and lead-free and meet corrosion requirements.

Hot Dipped Galv: Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50m.

Ring Shank: Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification.

Clipped Head: Increases number of nails per strip. The head area is designed to maximise resistance to the head being pulled through Specification - Head area corresponding to full round head area, according to EC5

PTDPAS141222

Paslode IM350 Nails have a clipped head with a diamond point for easy insertion. The Galv-Plus finish meets the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor). Specification: Zn / Al alloy approx. 15m. Patented paper strip collation, eliminates paper residue under the nail heads and prevents damage to your Gas Framing Nailer.

Suitable for use with the Paslode IM350 Nailer.

All Paslode nails are CE Marked which guarantees compliance to European regulations.

Smooth or Ring Shank available.

These Paslode IM360 Nails have the following specification:

Finish: Galv-Plus
Size: 3.1 x 90mm
Shank: Smooth
Pack: Box of 2,200
Number of Fuel Cells: 2

PTDPAS141234

Paslode IM90 Diamond point RounDrive nails have a unique off-centre 34. Made from Chrome 6, cadmium and lead free, with a Hot Dipped Galvanised finish. Meets the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification: Zinc coating minimum 50m. Round head, the head area is designed to maximise resistance to the head being pulled through.

Supplied with Paslode Special Impulse gas fuel cells.

Smooth or Ring Shank avaliable.

These Paslode IM90 Nails have the following specification:

Finish: Hot Dipped Galvanised
Size: 3.1 x 63mm
Shank: Ring
Pack: Box of 2,500

The Ring Shank provides the highest withdrawal resistance. Fixing across the grain. RPI (Rings Per Inch) vary from 16 to 32 depending on specification.

PTDPAS142031

Paslode IM65a Brads have an electro galvanised finish, this meets Eurocode 5 requirements for all applications in service class 1 (indoor). Specification: Zn and chromate minimum 7m. The stronger, stiffer 16 gauge nail ensures consistent drivability. 16 gauge size creates smaller hole to provide excellent finishing. Secured with specific glue, designed not to fracture into pieces if accidentally dropped.

Suitable for use with the Paslode Impulse IM65A F16 Angled Nailer.

All Paslode nails are CE Marked which guarantees compliance to European regulations.

These Paslode IM65a Brads have the following specification:

Finish: Galvanised
Size: 32mm
Diameter: 1.6mm
Pack: Box of 2,000
Number of Fuel Cells: 2

PTDPAS300270

Paslode IM65a Brads have an electro galvanised finish, this meets Eurocode 5 requirements for all applications in service class 1 (indoor). Specification: Zn and chromate minimum 7m. The stronger, stiffer 16 gauge nail ensures consistent drivability. 16 gauge size creates smaller hole to provide excellent finishing. Secured with specific glue, designed not to fracture into pieces if accidentally dropped.

Suitable for use with the Paslode Impulse IM65A F16 Angled Nailer.

All Paslode nails are CE Marked which guarantees compliance to European regulations.

These Paslode IM65a Brads have the following specification:

Finish: Galvanised
Size: 38mm
Diameter: 1.6mm
Pack: Box of 2,000
Number of Fuel Cells: 2

PTDPAS300271

Paslode IM65a Brads have an electro galvanised finish, this meets Eurocode 5 requirements for all applications in service class 1 (indoor). Specification: Zn and chromate minimum 7m. The stronger, stiffer 16 gauge nail ensures consistent drivability. 16 gauge size creates smaller hole to provide excellent finishing. Secured with specific glue, designed not to fracture into pieces if accidentally dropped.

Suitable for use with the Paslode Impulse IM65A F16 Angled Nailer.

All Paslode nails are CE Marked which guarantees compliance to European regulations.

These Paslode IM65a Brads have the following specification:

Finish: Galvanised
Size: 51mm
Diameter: 1.6mm
Pack: Box of 2,000
Number of Fuel Cells: 2

PTDPAS300273

Paslode IM65a Brads have an electro galvanised finish, this meets Eurocode 5 requirements for all applications in service class 1 (indoor). Specification: Zn and chromate minimum 7m. The stronger, stiffer 16 gauge nail ensures consistent drivability. 16 gauge size creates smaller hole to provide excellent finishing. Secured with specific glue, designed not to fracture into pieces if accidentally dropped.

Suitable for use with the Paslode Impulse IM65A F16 Angled Nailer.

All Paslode nails are CE Marked which guarantees compliance to European regulations.

These Paslode IM65a Brads have the following specification:

Finish: Galvanised
Size: 63mm
Diameter: 1.6mm
Pack: Box of 2,000
Number of Fuel Cells: 2

PTDPAS300274