Tool Accessories

The Wera BTH BiTorsion Phillips Extra Hard Bits for use with all combi and drill drivers, for impact tools use Impaktor bits. Significantly extend service life, ideal for use with screws into general construction materials and timbers.

Use with Wera BiTorsion Rapidaptor bit holder for ultimate service life.

These Wera BTH BiTorsion Phillips Bits have the following specification:

Size: PH1 x 25mm
Pack Size: 10

PTDWER056410

The WERA Impaktor Bit Check Set includes an Impaktor ring magnet holder and 29 Impaktor bits. The Impaktor system provides a triple torsion zone to absorb the destructive peak loads that impact machines deliver. The optional ring magnet function will securely hold up to 10in screws. Ideal for confined and overhead working. Diamond coating, bespoke heat treatment and accurate manufacturing combine to deliver unbeatable performance.

Contains:
7 x 25mm Phillips Bits: PH1(x2), PH2(x3) and PH3(x2).
7 x 25mm Pozidriv Bits: PZ1(x2), PZ2(x3) and PZ3(x2).
11 x 25mm TORX Bits: TX10, TX15, TX20(x2), TX25(x3), TX30(x2) and TX40(x2).
4 x 25mm Hex-Plus Bits: 3, 4, 5 and 6mm.
1 x Impaktor 897/4 Ring Magnet Bit Holder.

PTDWER057690

The Wera Bit-Check 6 Impaktor 1 SB, designed for compact and organised tool storage. The Impaktor system provides a triple torsion zone to absorb the destructive peak loads that impact machines deliver, maximising service life. An optional ring magnet function will securely hold up to 10in screws, ideal for confined and overhead working. The bits have been accurately manufactured and feature a diamond coating with a bespoke heat treatment to deliver unbeatable performance.

Contains:
2 x 50mm Phillips Bits: PH2 and PH3.
2 x 50mm Pozidriv Bits: PZ2 and PZ3.
2 x 50mm TORX Bits: TX25 and TX30.

PTDWER073890

Wera BiTorsion Diamond Bits have a significantly extended service life and prevent damaging cam-out. Ideal for use with screws into high resistant materials such as hardwoods and ABS plastic and self-tapping screws.

Use with all combi and drill drivers. For impact tools, use Impaktor bits. Use with Wera BiTorsion Rapidaptor bit holder for ultimate service life.

PTDWER059532003

This Wera BCBR9 Bit-Check Ratchet Set is supplied with the Zyklop mini ratchet. It has a drop-forged full steel design with a fine, 60 tooth mechanism. Allows a small return angle of 6 for precise work. With simple left/right switching and an ergonomically shaped ratchet head and lever. It is also incredibly strong, handling torque in excess of 65Nm.

Also supplied with a selection of torsion extra tough screwdriver bits for hard jobs and machine screws. Bits supplied:

2 x 25mm Phillips Bits: PH1 & PH2.
2 x 25mm Pozi Bits: PZ1 & PZ2.
2 x 25mm Hex Bits: 4.0 & 5.0mm.
3 x 25mm TORX Bits: TX15, TX20 & TX25.

All supplied in a secure folding case that allows easy bit selection.

PTDWER073645

The Wera BTH BiTorsion Phillips Extra Hard Bits for use with all combi and drill drivers, for impact tools use Impaktor bits. Significantly extend service life, ideal for use with screws into general construction materials and timbers.

Use with Wera BiTorsion Rapidaptor bit holder for ultimate service life.

These Wera BTH BiTorsion Phillips Bits have the following specification:

Size: PH2 x 50mm
Pack Size: 10

PTDWER059542

The Wera Impaktor 25mm Phillips bits with 1/4in hexagon drive. Designed for use with all heavy-duty impact machines and can be used on any machine. The Impaktor technology ensures an above-average service life even under extreme conditions thanks to the best possible utilisation of the material properties and optimally designed geometry. Particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance.

Use with Impaktor holders to complete the system.

Phillips PH2 x 25mm
Box 10

PTDWER057616

The Wera Impaktor 25mm Phillips bits with 1/4in hexagon drive. Designed for use with all heavy-duty impact machines and can be used on any machine. The Impaktor technology ensures an above-average service life even under extreme conditions thanks to the best possible utilisation of the material properties and optimally designed geometry. Particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance.

Use with Impaktor holders to complete the system.

Phillips PH3 x 25mm

PTDWER057617

Wera Impaktor 855/1 Pozi bits 25mm long with 1/4in hexagon drive , suitable for DIN 3126-F 6.3, ISO 1173 bit holders.

The Impaktor technology ensures an above-average service life even under extreme conditions thanks to the best possible utilisation of the material properties and optimally designed geometry, particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance.

PZ2 x 25mm
Box 10

PTDWER057621

Wera Impaktor 855/1 Pozi bits 25mm long with 1/4in hexagon drive , suitable for DIN 3126-F 6.3, ISO 1173 bit holders.

The Impaktor technology ensures an above-average service life even under extreme conditions thanks to the best possible utilisation of the material properties and optimally designed geometry, particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance.

PZ3 x 25mm
Box 10

PTDWER057622

Wera Impaktor 967/1 TORX bits 25mm long with 1/4in hexagon drive , suitable for DIN 3126-F 6.3, ISO 1173 bit holders.

The Impaktor technology ensures an above-average service life even under extreme conditions thanks to the best possible utilisation of the material properties and optimally designed geometry, particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance.

TX25 x 25mm
Box 10

PTDWER057625

Wera Impaktor 967/1 TORX bits 25mm long with 1/4in hexagon drive , suitable for DIN 3126-F 6.3, ISO 1173 bit holders.

The Impaktor technology ensures an above-average service life even under extreme conditions thanks to the best possible utilisation of the material properties and optimally designed geometry, particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance.

TX30 x 25mm
Box 10

PTDWER057626

Wera Impaktor 967/1 TORX bits 25mm long with 1/4in hexagon drive , suitable for DIN 3126-F 6.3, ISO 1173 bit holders.

The Impaktor technology ensures an above-average service life even under extreme conditions thanks to the best possible utilisation of the material properties and optimally designed geometry, particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance.

TX40 x 25mm
Box 10

PTDWER057627

Wera Impaktor Hex-Plus bits 50mm long with 1/4in hexagon drive , suitable for DIN 3126-F 6.3, ISO 1173 bit holders.

The Impaktor technology ensures an above-average service life even under extreme conditions thanks to the best possible utilisation of the material properties and optimally designed geometry, particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance.

Size: 6mm Hex-Plus x 50mm
Box of 5

PTDWER057646

Wera Impaktor 50mm Phillips bits with 1/4in hexagon drive. Designed for use with all heavy-duty impact machines and can be used on any machine. The Impaktor technology ensures an above-average service life even under extreme conditions thanks to the best possible utilisation of the material properties and optimally designed geometry. Particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance.

Use with Impaktor holders to complete the system.

Size PH3
Box 5

PTDWER057657