Wire - Nylon Brushes & Wheels

Tube/Radiator Brush with crimped steel wire for removal of rust, paint, scale, surface levelling and preparation for welding or brazing jobs. Ideal for use on metal or stone, for cleaning radiators and working inside large holes or pipes.

Specification:

Overall Length: 200mm
Working Length: 55mm

kwb Tube/Radiator Brush 20 x 200mm

PTDKWB599300

Tube/Radiator Brush with crimped steel wire for removal of rust, paint, scale, surface levelling and preparation for welding or brazing jobs. Ideal for use on metal or stone, for cleaning radiators and working inside large holes or pipes.

Specification:

Overall Length: 200mm
Working Length: 55mm

kwb Tube/Radiator Brush 38 x 200mm

PTDKWB599600

kwb Cup Brush with 6mm shank and crimped HSS steel wire for derusting, removal of surface coatings, paint, cleaning frameworks and facades, roughing up, descaling and deburring applications. Ideal for use on metal or stone and for working medium sized surfaces. Suitable for use with most electric drills.

kwb HSS Crimped Cup Brush 50mm Coarse

PTDKWB606230

Corner End Brush with 6mm shank and crimped HSS steel wire for derusting, removal of surface coatings, paint, excess rubber, cleaning, roughing up and descaling applications. Ideal for use on metal or stone and for working with difficult shapes or in difficult to reach areas. Suitable for use with most electric drills.

PTDKWB608030

Cup Brush with 6mm shank and crimped brass, corrosion-free wire for fine work including cleaning, removal of paint and polishing applications. Ideal for use on metal or stone and for working medium sized surfaces. Suitable for use with most electric drills.

PTDKWB609110

Tube/Radiator Brush with crimped steel wire for removal of rust, paint, scale, surface levelling and preparation for welding or brazing jobs. Ideal for use on metal or stone, for cleaning radiators and working inside large holes or pipes.

Specification:

Overall Length: 200mm
Working Length: 55mm

PTDGRPKWB599300

kwb Cup Brush with 6mm shank and crimped HSS steel wire for derusting, removal of surface coatings, paint, cleaning frameworks and facades, roughing up, descaling and deburring applications. Ideal for use on metal or stone and for working medium sized surfaces. Suitable for use with most electric drills.

PTDGRPKWB606230

Wire Wheel with 6mm shank and crimped HSS steel wire for derusting, removal of paint, scale and ridges. Ideal for use on metal or stone and for working on narrow edges, frames, posts, grilles and pipes. Suitable for use with most electric drills.

PTDGRPKWB607330

kwb AGGRESSO-FLEX Cup Brush with crimped HSS steel wire for derusting, removal of surface coatings, paint, heavy rust and floor coverings, cleaning of shuttering and facades, descaling and deburring applications. Ideal for use on metal or stone and for working medium to large sized surfaces. Suitable for use with most electric angle grinders.

Specification:

Wire Diameter: 0.35mm
Thread: M14

PTDGRPKWB719106

These Faithfull brushes have nylon bristles for use on wood, metal and stone. They have many times the life of a wire brush. Conform to ISO 9001 and DIN EN1083-1 and 2.

The 6mm shank enables them to be used with a power tool with a maximum of 4500rpm.

The Faithfull FAIWBN65 Nylon cup brush has the following dimensions:
Size: 65mm diameter x 6mm shaft x 1.5mm bristle.

PTDFAIWBN65

A crimped steel circular wire brush designed to be mounted on a bench grinder. The wire wheels are ideal for the removal of rust, corrosion, paint, weld spatter and general surface deburring. It is supplied complete with plastic inserts (bushes) to enable the wheel to be mounted on grinders with smaller drive spindles.

PTDGRPFAIWBWW150

Faithfull Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder.

Suitable for industrial use and more specialist applications.

Wire: Steel

Type: Cup

Face Diameter: 125mm

Thread: M14 x 2

Wire: 0.3mm

Conforms to ISO 9001 and DIN EN1083-1 and 2

Maximum rpm 6,500.

PTDFAIWBC125

This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to medium-duty applications.

Suitable for use in industrial power tools at higher speeds.

The FAIWBS25E Wire End Brush has the following specifications:
Type: Flat End.
Face Diameter: 25 mm.
Shaft: 6 mm (1/4 inch).
Wire: 0.3 mm crimped steel.
Conforms to ISO 9001. and DIN EN1083-1 and 2.

PTDFAIWBS25E

The Faithfull crimped brass wire circular brush designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and are designed to operate with power tools up to a maximum of 4,500/min.

Type: Circular

Diameter: 75 mm

Shaft: 6 mm (1/4in)

Wire: 0.30 mm crimped brass wire

Conforms to ISO 9001 and DIN EN1083-1 and 2.

PTDFAIWBS75CB

These Faithfull brushes have nylon bristles for use on wood, metal and stone. They have many times the life of a wire brush. Conform to ISO 9001 and DIN EN1083-1 and 2.

The 6mm shank enables them to be used with a power tool with a maximum of 4500rpm.

The Faithfull FAIWBN75C Nylon Wheels have a flat circular shape with the following dimensions:
Size: 75mm diameter x 6mm shaft x 1.5mm bristle.

PTDFAIWBN75C