End Brushes

This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to medium-duty applications.

Suitable for use in industrial power tools at higher speeds.

PTDGRPFAIWBSI12

This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to medium-duty applications.

Suitable for use in industrial power tools at higher speeds.

The FAIWBSI12 Wire End Brush has the following specifications:
Type: Flat End.
Face diameter: 12 mm x 20 mm.
Shaft: 6 mm (1/4in).
Wire: 0.3 mm steel.
Conforms to ISO 9001. and DIN EN1083-1 and 2.

PTDFAIWBSI12

This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to medium-duty applications.

Suitable for use in industrial power tools at higher speeds.

Suitable for cleaning paint or deburring of moulds or castings in hard-to-reach areas such as cylinders. Can be used in industrial power tools at higher speeds.

Type: Pointed end

Face diameter: 23/60 mm x 25 mm

Shaft: 6 mm (1/4in)

Wire: 0.3 mm steel

Conforms to ISO 9001. and DIN EN1083-1 and 2

Maximum rpm 20,000.

PTDFAIWBSI23P

This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to medium-duty applications.

Suitable for use in industrial power tools at higher speeds.

The FAIWBS25E Wire End Brush has the following specifications:
Type: Flat End.
Face Diameter: 25 mm.
Shaft: 6 mm (1/4 inch).
Wire: 0.3 mm crimped steel.
Conforms to ISO 9001. and DIN EN1083-1 and 2.

PTDFAIWBS25E

The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for working on edges and recesses and the inside of bores etc.

The Lessmann End Brush With Shank has the following specification:

Wire Type: Steel.
Diameter: 12mm
Wire Height: 20mm.
Wire Gauge: 0.30.
Max Speed: 20,000/rpm.

PTDLES451161

The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for working on edges and recesses and the inside of bores etc.

The Lessmann Pointed End Brush With Shank has the following specification:

Wire Type: Steel.
Diameter: 12mm.
Wire Height: 20mm.
Wire Gauge: 0.30.
Max Speed: 20,000/rpm.

PTDLES451162

The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for working on edges and recesses and the inside of bores etc.

The Lessmann End Brush With Shank has the following specification:

Wire Type: Steel.
Diameter: 23mm.
Wire Height: 25mm.
Wire Gauge: 0.30.
Max Speed: 20,000/rpm.

PTDLES453161

The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for working on edges and recesses and the inside of bores etc.

The Lessmann Pointed End Brush With Shank has the following specification:

Wire Type: Steel
Diameter: 23mm
Wire Height: 25mm
Wire Gauge: 0.30
Max Speed: 18,000/rpm

PTDLES453162

The Lessmann DIY Steel Wire End Brush is fitted with a 6mm shank. Ideal for working in hard to reach places such as drilled holes or recesses. For the removal of paint and the cleaning of moulds and castings.

Wire Type: Steel.
Diameter: 25mm.
Shank: 6mm
Wire Guage: 0.30
Max Speed: 12,000/rpm.

PTDLES45516107

The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for working on edges and recesses and the inside of bores etc.

PTDGRPLES451162

The Lessmann Knot End Brushes are fitted with a 6mm shank. When the brush is in rotation it will open up and increase in diameter. This enables the operator to work in hard to reach areas such as drilled holes and recesses of all kinds.

The Lessmann Knot End Brush With Shank has the following specification:

Diameter: 19mm.
Wire: 0.35 Steel.

PTDLES453278

The Lessmann Knot End Brushes are fitted with a 6mm shank. When the brush is in rotation it will open up and increase in diameter. This enables the operator to work in hard to reach areas such as drilled holes and recesses of all kinds.

The Lessmann Knot End Brush With Shank has the following specification:

Diameter: 22mm.
Wire: 0.35 Steel.

PTDLES454278

The Lessmann Knot End Brushes are fitted with a 6mm shank. When the brush is in rotation it will open up and increase in diameter. This enables the operator to work in hard to reach areas such as drilled holes and recesses of all kinds.

The Lessmann Knot End Brush With Shank has the following specification:

Diameter: 29mm.
Wire: 0.35 Steel.

PTDLES456278

The Lessmann Knot End Brushes are fitted with a 6mm shank. When the brush is in rotation it will open up and increase in diameter. This enables the operator to work in hard to reach areas such as drilled holes and recesses of all kinds.

PTDGRPLES453278

Corner End Brush with 6mm shank and crimped HSS steel wire for derusting, removal of surface coatings, paint, excess rubber, cleaning, roughing up and descaling applications. Ideal for use on metal or stone and for working with difficult shapes or in difficult to reach areas. Suitable for use with most electric drills.

PTDKWB608030