Wire - Nylon Brushes & Wheels

A crimped steel circular wire brush designed to be mounted on a bench grinder. The wire wheels are ideal for the removal of rust, corrosion, paint, weld spatter and general surface deburring. It is supplied complete with plastic inserts (bushes) to enable the wheel to be mounted on grinders with smaller drive spindles.

PTDGRPFAIWBWW150

A crimped steel circular wire brush designed to be mounted on a bench grinder. The wire wheels are ideal for the removal of rust, corrosion, paint, weld spatter and general surface deburring. It is supplied complete with plastic inserts (bushes) to enable the wheel to be mounted on grinders with smaller drive spindles.

The Faithfull FAIWBWW200 conforms to ISO 9001 and DIN EN1083-1 and 2 and has the following specifications:
Diameter: 200mm x 25mm face
Bore range size: 32mm (25, 22, 20, 16 &12mm bushes included)
Wire: 0.3mm
Type: Circular

PTDFAIWBWW200

Faithfull Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder.

Suitable for industrial use and more specialist applications.

Wire: Steel

Type: Cup

Face Diameter: 125mm

Thread: M14 x 2

Wire: 0.3mm

Conforms to ISO 9001 and DIN EN1083-1 and 2

Maximum rpm 6,500.

PTDFAIWBC125

This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to medium-duty applications.

Suitable for use in industrial power tools at higher speeds.

The FAIWBS25E Wire End Brush has the following specifications:
Type: Flat End.
Face Diameter: 25 mm.
Shaft: 6 mm (1/4 inch).
Wire: 0.3 mm crimped steel.
Conforms to ISO 9001. and DIN EN1083-1 and 2.

PTDFAIWBS25E

This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to medium-duty applications.

Suitable for use in industrial power tools at higher speeds.

PTDGRPFAIWBSI12

This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to medium-duty applications.

Suitable for use in industrial power tools at higher speeds.

The FAIWBSI12 Wire End Brush has the following specifications:
Type: Flat End.
Face diameter: 12 mm x 20 mm.
Shaft: 6 mm (1/4in).
Wire: 0.3 mm steel.
Conforms to ISO 9001. and DIN EN1083-1 and 2.

PTDFAIWBSI12

This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to medium-duty applications.

Suitable for use in industrial power tools at higher speeds.

Suitable for cleaning paint or deburring of moulds or castings in hard-to-reach areas such as cylinders. Can be used in industrial power tools at higher speeds.

Type: Pointed end

Face diameter: 23/60 mm x 25 mm

Shaft: 6 mm (1/4in)

Wire: 0.3 mm steel

Conforms to ISO 9001. and DIN EN1083-1 and 2

Maximum rpm 20,000.

PTDFAIWBSI23P

Faithfull Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder.

Suitable for industrial use and more specialist applications.

Wire: Steel

Type: Cup

Face Diameter: 100mm

Thread: M14 x 2

Wire: 0.3mm

Conforms to ISO 9001 and DIN EN1083-1 and 2

Maximum rpm 8,500.

PTDFAIWBC100

Faithfull Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder.

Suitable for industrial use and more specialist applications.

Wire: Stainless Steel

Type: Cup

Face Diameter: 100mm

Thread: M14 x 2

Wire: 0.3mm

Conforms to ISO 9001 and DIN EN1083-1 and 2

Maximum rpm 8,500.

PTDFAIWBC100S

Faithfull Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder.

Suitable for industrial use and more specialist applications.

Wire: Steel

Type: Cup

Face Diameter: 150mm

Thread: M14 x 2

Wire: 0.3mm

Conforms to ISO 9001 and DIN EN1083-1 and 2

Maximum rpm 6,500.

PTDFAIWBC150

Faithfull Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder.

Suitable for industrial use and more specialist applications.

The FAIWBC60 Wire Cup Brush has the following specifications:
Wire: Steel.
Type: Cup.
Face Diameter: 60mm.
Thread: M14 x 2.
Wire: 0.3mm.
Conforms to ISO 9001 and DIN EN1083-1 and 2.
Maximum speed: 12,500 rpm.

PTDFAIWBC60

Faithfull Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder.

Suitable for industrial use and more specialist applications.

Wire: Steel

Type: Cup

Face Diameter: 75mm

Thread: M14 x 2

Wire: 0.3mm

Conforms to ISO 9001 and DIN EN1083-1 and 2

Maximum rpm 12,500.

PTDFAIWBC75

These Faithfull brushes have nylon bristles for use on wood, metal and stone. Many times the life of a wire brush. Conform to ISO 9001 and DIN EN1083-1 and 2.

The 6mm shank enables them to be used with a power tool with a maximum of 4500rpm.

The Faithfull FAIWBN65 Nylon cup brush has the following dimensions:
Size: 65mm diameter x 6mm shaft x 1.5mm bristle.

PTDFAIWBN65

Faithfull Twist Knot Wire Cup Brush for heavier duty applications such as the removal of slag, rust, scale or even dried concrete.Designed for use with a compatible thread angle grinder.

Suitable for industrial use and more specialist applications.

Face Diameter: 100mm

Thread: M14 x 2

Wire: 0.5mm

Conforms to ISO 9001 and DIN EN1083-1 and 2
Maximum rpm 8500

PTDFAIWBT100

Faithfull Twist Knot Wire Cup Brush for heavier duty applications such as the removal of slag, rust, scale or even dried concrete.Designed for use with a compatible thread angle grinder.

Suitable for industrial use and more specialist applications.

Face Diameter: 65mm

Thread: M14 x 2

Wire: 0.5mm

Conforms to ISO 9001 and DIN EN1083-1 and 2

Maximum rpm 12,500.

PTDFAIWBT65