AutoTorque represent a selection of competitively priced fine precision torque wrenches manufactured in Britain. A forged ratchet with a push through 3/8 in or 1/2 in square drive for right of left hand threads.
The low friction torque mechanism is fully enclosed giving protection against ingress of dirt.
Calibration is in Foot Pounds and Newton Metres. An AUDIBLE CLICK and an IMPULSE through the wrench indicates pre-set has been achieved. Reset is automatic when hand pressure is relaxed.
Each torque wrench is guaranteed and conforms to BS.6703 and ISO 6789 standards.
When used in accordance with the manufacturers instructions the Williams Superslim torque wrench will give many years of highly accurate and reliable use.
The AutoTorque model has a full size plastic handle which gives the operator a hand grip and is also used to set the required torque loading against a calibration scale of lbf.ft and Nm on the tubular steel body. Each AutoTorque is individually tested before leaving the factory.
Reversible ratchet thread
Black powder coating
Square Drive - 3/8in
ft.lb 10 - 50
Nm 15 - 70
Overall Length 420 mm / 16.1/2in
- Additional Information
Condition New SKU PTDWSS06210DC Weight (Kg) 1.0700 Brand Williams Manufacturers Part Number 06210 DC Retailer Barcode No Package Height (cm) 4.7 Package Width (cm) 0.6 Package Length (cm) 0.6 Bullet 1 Forged ratchet with a push through action. Bullet 2 Low friction torque mechanism is fully enclosed protecting against ingress of dirt. Bullet 3 An AUDIBLE CLICK and an IMPULSE through the wrench indicates pre-set has been achieved. Bullet 4 Two windows that display the calibrated scale one showing ft.lb the other Nm. Bullet 5 Finger tip adjustment of the end cap aligns the calibrated scale with the marker line. Bullet 6 N/A