Workwear & Safety

Zarges Industrial Swingback Steps have high strength for regular use and are the ultimate builders stepladder. With a patented 7-point connection between the tread and stile and a reinforcing support rod through the centre of the tread.

For safety, it has non-slip rubber feet and large serrated treads. Smooth box section stiles ensure a comfortable hold, with no sharp edges. Optimal stability is provided thanks to locking side bars on both sides.

All sizes conform to EN131 professional standards, with a 150kg rating and a 10 year guarantee.

Number of treads: 8.
Open height: 1.73m.
Closed length: 1.89m.
Base width: 0.52m.
Base spread: 1.24m.
Weight: 8.4kg.

Delivered Direct to Business, Site or Home, please note a carriage surcharge may apply dependant on the delivery address, please contact us for further details.

PTDZAR49608

Zarges Industrial Swingback Steps have high strength for regular use and are the ultimate builders stepladder. With a patented 7-point connection between the tread and stile and a reinforcing support rod through the centre of the tread.

For safety, it has non-slip rubber feet and large serrated treads. Smooth box section stiles ensure a comfortable hold, with no sharp edges. Optimal stability is provided thanks to locking side bars on both sides.

All sizes conform to EN131 professional standards, with a 150kg rating and a 10 year guarantee.

Number of treads: 10.
Open height: 2.16m.
Closed length: 2.35m.
Base width: 0.57m.
Base spread: 1.53m.
Weight: 10.2kg.

Delivered Direct to Business, Site or Home, please note a carriage surcharge may apply dependant on the delivery address, please contact us for further details.

PTDZAR49610

The Zarges Industrial Roof Ladders have strong oval section stiles and 300mm serrated round rungs for better grip.

The ladder has a ridge hook to grip the ridge of a pitched roof, and 100mm diameter running wheels for precise positioning. The bearer bars are made from 10mm x 6mm aluminium flat bar with PVC coating for extra strength. These bearer bars hold the ladder off the roof and spread the weight to protect roof tiles from damage.

Number of rungs: 1 x 9, 1 x 10.
Closed length: 3.5m.
Extended length: 5.95m.
Number of bearer bars: 5.
Weight: 13kg.

Delivered Direct to Business, Site or Home; please note a carriage surcharge may apply dependent on the delivery address, contact us for further details.

PTDZAR100621

The Zarges Double Sided Stepladders have stiles with a smooth anodised finish and 80mm deep treads to allow standing without fatigue. The treads and stiles are made from extruded aluminium sections for excellent durability.

There is a triple riveted connection between treads and stiles to ensure maximum strength, and a high-strength Perlon strap with sewn-in fixing strap prevents splaying. The feet are fitted with plastic end caps to help to prevent slipping.

They conform to EN 131, and have a 150 kilo rating.

Number of treads: 2 x 3.
Open height: 0.71m.
Weights: 3.2kg.
Stile depth: 42mm
Overall base width: 0.43m.
Base spread: 0.66m.

Delivered Direct to Business, Site or Home, please note a carriage surcharge may apply dependant on the delivery address, please contact us for further details.

PTDZAR41263

This Faithfull End Cutter Pliers Holder is made from high-quality hide leather to last and provide dependable service. Its steel fitment is designed to hold end cutting pliers and similar cutters.

Fits most belts.

Overall Size: 150mm x 100mm (6 x 4in).

PTDFAIECH

The Zarges Anodised Trade Platform Steps have 80mm deep treads to allow standing without fatigue. A solid safety platform of diecast aluminium measures 250mm x 250 mm, and the ladder is supplied with a spacious aluminium storage tray for materials and tools.

Triple riveted connection between treads and stiles ensures strength and durability, and non-slip plastic end caps improve safety. The treads and stiles are made from extruded aluminium sections. Two high-strength Perlon belts prevent splay, are fitted on all models of 4 rungs or more.

They conform to EN 131, and have a 150 kilo rating.

Number of treads: 3.
Platform height: 0.66m.
Closed length: 1.44m.
Weight: 3.7kg.
Stile depth steps / back stay: 42 / 42mm.
Overall base width: 0.44m.
Base spread: 0.69m.

Delivered Direct to Business, Site or Home, please note a carriage surcharge may apply dependant on the delivery address, please contact us for further details.

PTDZAR41223

The Scan Welders Gauntlets are made from cowsplit leather with black welted seams, featuring a one-piece back which provides strength. Fully lined, the guantlets are comfortable to use. At 350mm (14in) long, they are excellent at protecting the hand, wrist and lower forearm. Excellent for Welders.

Conforms to EN388:2016, EN407 and EN420 Standards.

Abrasion Performance Index (1-4): 4
Blade Cut Performance Index (1-5): 1
Tear Performance Index (1-4): 4
Puncture Performance Index (1-4): 3

Resistance to Flammability Index (0-4): 4
Contact Heat Resistance Index (0-4): 1
Convective Heat Resistance Index (0-4): 3
Small Splashes of molten metal Index (0-4): 4

PTDSCAGLOWELRED

The Stanley FatMax Mobile Chest has a lock mechanism in the lid to hold a level and a saw. Tools can also be stored vertically within the chest. An all-round water seal keeps valuable contents safe. Heavy-duty wheels give mobility on rough surfaces.

The portable tray is ideal for hand tools and small parts, and the lid has an integrated lock and keys to keep tools protected. It also has an integrated V-groove for any on-site sawing needs and the telescopic handle slides in for compactness when not in use. A back end handle enables convenient lifting into a vehicle for two people.

Please Note - Tools NOT included

Specification

Dimensions: 910 x 516 x 431mm.

PTDSTA194850

The Stanley 12 Pocket Tool Roll is made from durable 600 denier fabric. Contains 12 pockets for various sizes of tools and ties for convenient and safe storage.

Dimensions: 38.5 x 64cm

PTDSTA193601

This Stanley 19 inch tool box has two handy organisers in the lid as well as an internal tote tray for excellent organisation.

The box has durable metal latches to hold the box securely closed, and a soft-grip handle for a secure, comfortable grip.

Supplied with a 30cm (12 inch) tool box.

PTDSTA192219

The Faithfull Leather belt 45mm (1.3/4in) wide with a strong buckle. Adjustable sturdy leather belt, suitable for waist sizes 34inch - 44inch.

PTDFAILB134

Scan Rigger Gloves are a general purpose glove suitable for most DIY tasks. Made from canvas with added protection, with hard-wearing leather palms and reinforced fingers and knuckles. Made from cow split leather with patched palm and striped cotton back, with reinforced sections on the fingers and knuckle strap. The gloves also have pasted cuffs.

Conforms to EN388:2016 and EN420 Standards.

PTDSCAGLORIG

The Zarges Anodised Trade Platform Steps have 80mm deep treads to allow standing without fatigue. A solid safety platform of diecast aluminium measures 250mm x 250 mm, and the ladder is supplied with a spacious aluminium storage tray for materials and tools.

Triple riveted connection between treads and stiles ensures strength and durability, and non-slip plastic end caps improve safety. The treads and stiles are made from extruded aluminium sections. Two high-strength Perlon belts prevent splay, are fitted on all models of 4 rungs or more.

They conform to EN 131, and have a 150 kilo rating.

Number of treads: 10.
Platform height: 2.2m.
Closed length: 3.07m.
Weight: 10.1kg.
Stile depth steps / back stay: 48 / 42mm.
Overall base width: 0.6m.
Base spread: 1.73m.

Delivered Direct to Business, Site or Home, please note a carriage surcharge may apply dependant on the delivery address, please contact us for further details.

PTDZAR41230

The Zarges Masterstep is safe and comfortable for optimum freedom of movement. It has a particularly large work platform (400mm x 400mm) with aluminium checker plate surface and 80mm deep steps with ZARGES Safer Step Technology for fatigue-free standing. Two handrails are supplied as standard for safe access.

The ladder has an extra wide base which provides additional stability, and two high-strength Perlon straps for preventing splay. Its treads and stiles are made from extruded aluminium sections, and have high strength ZARGES quality flanged connections. In addition, two side locking bars prevent the step collapsing in use / during movement.

Includes practical aluminium storage tray for small items, and an extra high knee rail.

They conform to EN 131 standards, and have a 150 Kilo rating.

Has a 10 year guarantee.

Number of treads: 5.
Platform height: 1.32m.
Closed length: 2.43m.
Weight: 7.5kg.
Stile depth steps / back stay: 73 / 58mm.
Overall base width: 0.65m.
Base spread: 1.25m.

Delivered Direct to Business, Site or Home, please note a carriage surcharge may apply dependant on the delivery address, please contact us for further details.

PTDZAR41634

The Zarges Multi-Purpose Ladders cover a multitude of uses with compact transport dimensions.

The ladder can be used as a lean-to ladder with or without support, a stepladder which can be ascended from both sides, or as a practical working platform. It is easy to transport with four folding sections.

The multi-purpose ladded is manufactured from high strength aluminium extrusion, with side rails for maximum stability. It has replaceable 2-component plastic end caps to ensure positioning without risk of slipping, and high-strength ZARGES quality flanged connection between rungs and stiles for extra safety.

External width of ladder body: 350 mm.

Conforms to EN 131 standards, 150 Kilo rating, and has a 10 year guarantee.

Number of rungs: 2 x 3, 2 x 5.
Dimensions folded: 745 x 1490 x 275mm.
Height as stepladder: 2.3m.
Height as workplatform: 0.99m.
Length as lean-to ladder: 4.74m.
Weight: 15.5kg.
Stile depth: 61mm.

Delivered Direct to Business, Site or Home; please note a carriage surcharge may apply dependent on the delivery address, contact us for further details.

PTDZAR42382