Workwear & Safety

The Trend Airshield Pro Respirator is a fully protected powered respirator for use with all woodworking applications and is suitable for use when machining MDF. It is approved to new standard BS EN 12941.

New features include:
Combination face-seal and hood to improve protection.
Motor positioned away from the sensitive area of the forehead to reduce noise and irritation.
Attachment points for optional ear defenders.
Strategic component distribution ensures optimum centre of gravity is achieved for balance and comfort.
Twin filters with efficiency of 98%, more than double the Airshield MK1.
Audible low battery warning.
Removable 8-hour NiMH battery.

Specifications:
Rating: DIY/Craftsman/Professional.
Airflow Min: 160 l/Min.
Airflow fully charged: 200 1/Min.
Size of headband: 52cm - 62cm.
Motor sound level: 70 dB.
Battery: 8-hours NiMH battery.
Weight: 995 g.
Voltage: 230 volt.
Eye protection: BS EN 166 (low energy impact).
Respiratory protection: BS EN 12941 THP2(NPF50).

PTDGRPTREAIRPRO

The Trend Airshield Pro Respirator is a fully protected powered respirator for use with all woodworking applications and is suitable for use when machining MDF. It is approved to new standard BS EN 12941.

New features include:
Combination face-seal and hood to improve protection.
Motor positioned away from the sensitive area of the forehead to reduce noise and irritation.
Attachment points for optional ear defenders.
Strategic component distribution ensures optimum centre of gravity is achieved for balance and comfort.
Twin filters with efficiency of 98%, more than double the Airshield MK1.
Audible low battery warning.
Removable 8-hour NiMH battery.

Specifications:
Rating: DIY/Craftsman/Professional.
Airflow Min: 160 l/Min.
Airflow fully charged: 200 1/Min.
Size of headband: 52cm - 62cm.
Motor sound level: 70 dB.
Battery: 8-hours NiMH battery.
Weight: 995 g.
Voltage: 230 volt.
Eye protection: BS EN 166 (low energy impact).
Respiratory protection: BS EN 12941 THP2(NPF50).

Pack of 2 filters, suitable for use against solid particulates only.

PTDTREAIRP1

Pair of P3(R) Nuisance Odour Filters for AIR STEALTH half mask. The Twin HEPAC* pleat encapsulated design provides 99.99% filtration of airborne particles and aerosols at 0.3 micron and above.

*High Efficiency Particulate Air Composite

PTDTRESTEALTH3

The Trend AIR STEALTH Half Mask protects the user against airborne particles, oil aerosols, mist, welds and fumes. Fitted with a twin HEPAC pleat encapsulated filter, that provides 99.99% filtration of airborne particles and aerosols at 0.3 micron and above.

The exhalation valve is located at the bottom of the face piece, this helps to prevent exhalation fumes steaming or fogging glasses/visors. A protective grill covers 100% of filter surface. Protecting the filter from moisture and particulates, ensuring it performs better in clogging pressure and filtration efficiency.

Conforms to half mask standard: BS EN 140
Respiratory Protection: BS EN 143 P3(R)
Assigned Protection Factor: APF20

PTDTRESTEALTH

Pair of P3(R) filters for AIR STEALTH half mask with Twin HEPAC* pleat encapsulated design filter provides 99.99% filtration of airborne particles and aerosols at 0.3 micron and above.

*High Efficiency Particulate Air Composite

PTDTRESTEALTH1

Dust mask with replaceable filter for use when routing - for industrial and construction work, DIY and various other trades. It has a five times larger surface area than the average disposable dust mask, giving superior protection against dust inhalation and offering considerable cost savings.

The one way exhaust valve vents to the underneath, preventing exhaled air from fogging goggles or the optional visor, this also ensures that the filter stays dry reducing filter clogging and prolonging its life. P2 electrostatic filter has approximately life of ten times that of average disposable facemask.

Protects the user against hazardous toxic dust particles, metal fumes and mist to classification P2 and down to 0.3 microns enabling use with MDF.

Respiratory protection to BS EN143 P2.

PTDTREAIRACE

The Trend Airshield Pro Respirator is a fully protected powered respirator for use with all woodworking applications and is suitable for use when machining MDF. It is approved to new standard BS EN 12941.

New features include:
Combination face-seal and hood to improve protection.
Motor positioned away from the sensitive area of the forehead to reduce noise and irritation.
Attachment points for optional ear defenders.
Strategic component distribution ensures optimum centre of gravity is achieved for balance and comfort.
Twin filters with efficiency of 98%, more than double the Airshield MK1.
Audible low battery warning.
Removable 8-hour NiMH battery.

Specifications:
Rating: DIY/Craftsman/Professional.
Airflow Min: 160 l/Min.
Airflow fully charged: 200 1/Min.
Size of headband: 52cm - 62cm.
Motor sound level: 70 dB.
Battery: 8-hours NiMH battery.
Weight: 995 g.
Voltage: 230 volt.
Eye protection: BS EN 166 (low energy impact).
Respiratory protection: BS EN 12941 THP2(NPF50).

PTDTREAIRPRO

The Trend Air Pro Max APF40 Powered Respirator is an all-in-one safety helmet for industrial-rated head, eye and respiratory protection. For use in environments where fine airborne particles are present, dangers of flying debris, head impact or excessive noise levels. Positive pressure fan-driven filtered air supply at 220 litres per minute; no face fit required.

Fitted with a Class 1 panoramic polycarbonate visor with medium impact EN 166:2002 rating to withstand high-speed particles. No problems with misting, fogging or steaming up ensuring crystal clear vision at all times.

Suitable for users with facial hair or spectacle wearers.

EN 397:2012+A1:2012 high-impact head protection, complies with HSE on-site hard hat regulations for protection from falling objects and general head impacts.

Respiratory protection: EN 12941:1998+A2:2008 Protection Level TH3.

PTDTREAIRPROM