Personal Protection Equipment

These Scan Classic Spectacles offer protection against low energy, high speed impacts of up to 45m/s (100mph). They are wraparound with a one-piece, scratch resistant, clear polycarbonate lens that provides UV protection. The built-in side shields provide extra lateral protection. The spectacles are lightweight with adjustable ratchet arms, which give greater comfort and fit.

Conforms to EN166:1F.

PTDSCAPPESPCLCL

Moldex Jazz-Band Banded Earplugs provide a cost effective and convenient option against intermittent noise throughout the day. Dual material technology reduces noise transmission. Neck cord with safety release mechanism. The new design reduces band pressure by 40%.

Comes with a pair of spare pods. Replacement pods available separately.

Has a signal to noise ratio (SNR) of ;23dB.

PTDMOL6700

Moldex Classic Series Valved Masks are durable and comfortable. Ideally suited to most industrial applications, a loop strap makes it easy to put on and take off. The ActivForm seal automatically adjusts to different face shapes and sizes with no need for metal nose clips. The Ventex-Valve reduces heat and moisture.

10 x Workplace exposure limit. EN149:2001 + A1:2009.

20 x Moldex Classic Series FFP2 NR D Valved Masks

PTDMOL2405

This Scan face shield and visor is a good all-round lightweight brow guard with a polycarbonate face shield that offers unrestricted working vision and protection against medium energy flying particles and liquid splashes. It has an adjustable head harness to ensure comfortable fit over most head sizes. Its Flip-up visor mechanism allows full adjustment of the visor

Conforms to EN166:1B(3)

Size: Universal

PTDSCAPPEVISOR

This Scan replacement clear visor is suitable for the Standard Face Shield. It is made of Polycarbonate, offering unrestricted working vision and protection against medium energy flying particles and liquid splashes.

PTDSCAPPEVISREP

Twin Half Mask Respirator. A premium half mask, offering maximum protection and comfort. An extra wide sealing surface gives unparalleled comfort and fit.
Low resistance exhalation valve for easy breathing. Durable thermoplastic rubber mask and wide adjustable elastic strap make for a perfect fit. Fully adjustable 4-point cradle suspension ensuring an effective fit. Low profile angular filter design for minimal visual impairment. Manufactured from hypo-allergenic medical grade PVC.

SCAPPERESPA1 Supplied with A1 cartridges for organic vapours and gases, Conforms to EN140:1998 and EN14387:2004

SCAPPERESPP2 Supplied with P2 dust filter cartridges, Conforms to EN140:1998 and EN143:2000/A1:2006

The SCAPPERESPA1 Twin Half Mask Respirator is supplied with two A1 Cartridges for organic vapours and gases
Conforms to EN140:1998 and EN14387:2004.

PTDSCAPPERESPA1

These Scan FPP2 Premier valved disposable masks are designed to cover the nose, mouth and chin. The construction is made of the filter material itself, and the exhalation valve makes breathing easier. They are ideal for use with:
- Brick dust
- Concrete and plaster
- Hand sanding of wood and MDF
- Masonry and metal working with power tools (not welding)
- Loft insulation

With a FPP2 protection level, these masks are suitable for protecting against particles of between 2-5 microns, such as fine dusts, fumes, aqueous mists and oil based mists. For a guide on protection levels, please see below.

The masks have elasticated retaining straps to keep them securely in place. In addition they have an adjustable nose clip and soft foam nose piece for custom fitting. The non-irritating inner face piece ensures added comfort. To be disposed of after each period of work or 8 hour shift.

The masks conform to EN149:2001 and A1:2009.

Disposable Mask Protection Levels:
FFP1: Particles larger than 5 microns. Dusts, Fumes, Aqueous mists, Oil based mists
FFP2 Particles between 2 and 5 microns. Fine dusts, Fibres, Aqueous mists, Oil based mists
FFP3 Particles less than 2 microns. Very fine dusts, Fibres, Aqueous mists, Oil based mists
EN149 Filtering Face Piece for Particulates.

These SCAPPEP2MV Moulded Valved Disposable Masks are supplied in a pack of 3.

PTDSCAPPEP2MV

Scan Moulded Disposable Masks for protection against fine particles. This mask has a low breathing resistance, a non-irritating inner face piece and an adjustable nose clip with soft foam nosepiece. Secured by elasticated retaining straps.

FFP2 NR For use with: brick dust, ceramic tile dust, hand sanding of wood & MDF, and loft insulation. Conforms to EN149:2001 A1:2009.

Pack of 3 Scan Moulded Disposable Masks FFP2 Protection

PTDSCAPPEP2M

The Moldex 5000 Series Disposable Half Masks have integral gas filters, making the mask disposable and exempt from the maintenance requirements of COSHH if disposed of within one month. When particulate filters get clogged they can be replaced for prolonged use of the mask.

ABEK1 protection against organic [boiling point >65C] + inorganic gases & vapours, acid gases and ammonia. Plus P3 protection against harmful and toxic dusts, fumes and aerosols based on water and oil.

10 x Workplace exposure limit (half mask)
or 1000 ppm whichever is lower.

PTDMOL598401

Replacement particulate filter for the 5000 and 8000 series half masks. Particulate filters with pleated filter technology significantly reduces breathing resistance, improves wearer comfort and reduces fatigue. P3 R D protection against harmful and toxic dusts, fumes and aerosols based on water and oil.

Tested and certified to EN 143:2000+A1:2006.

PTDMOL808001

Replacement gas filter for the 8000 series half mask. ABEK1 protection against organic [boiling point >65C] + inorganic gases & vapours, acid gases and ammonia.

Tested and certified to EN 14387:2004+A1:2008.

PTDMOL890001

These Scan indirect ventilated goggles are ideal for use with power tools, particularly angle grinders and high-powered drills. With lenses made from tough polycarbonate, these goggles will withstand medium energy, high speed impacts of up to 120m/s (270mph). The lenses are clear and UV resistant. These goggles provide excellent protection from liquid droplets or splashes, large dust particles and molten metals. They can be worn over spectacles and the soft vinyl flanges around the goggles ensure comfort and conformity to facial contour.

Conform to EN166:1B (3.4.9).

PTDSCAPPEGIDV

Moldex Bitrex Fit Testing Kit.

The Approved Code of Practices supporting COSHH, CAR and CLAW stipulate that tight-fitting RPE (respiratory protective equipment) MUST be fit tested as part of the selection process. This is to ensure that the selected RPE has the potential to provide adequate protection for the wearer.

There are two main reasons for doing Bitrex testing. Firstly to make sure that the respirator itself is suited for the wearers particular face shape. Secondly to make sure that the respirator is fitted correctly to get a tight seal and ensure safety against hazards in the workplace. It is important to remember it is the suitability of the respirator that is being tested.

The Moldex MOL10301 Bitrex Fit Testing Kit contains:

2 x Nebulisers.
1 x Test Hood.
6 x 2.5ml Ampoules Bitrex Sensitivity Solution.
6 x 2.5ml Ampoules Bitrex Test Solution.
2 x Spare Parts For Nebulisers.
1 x Moldex Qualitative Fit Test CD.

PTDMOL10301

These Scan A1 Replacement Cartridges are suitable for Scan Twin Half Mask Respirators (SCAPPERESPA1 and SCAPPERESPP2). The filter provides low efficiency protection, and suitable for use with organic vapours and gases.

Conform to EN14387:2004

PTDSCAPPECARTA1

The Moldex Smart Series FFP2 NR D Valved Masks are suited to most industrial applications, this general-purpose mask is strong and durable. It has a DuraMesh structure for optimum shape retention and durability.

The ActivForm seal automatically adjusts to different face shapes and movements, reducing the need for multiple mask sizes.The Ventex valve reduces heat and moisture, keeping the mask as cool as possible. It is fitted with a strap and clip, so you can hang the mask around the neck during breaks and its blue clip means that it is suitable for the food industry.

FFP2 NR D for protection against toxic dusts, mists and fumes based on water and oil.
10 x Workplace exposure limit. EN149:2001 + A1:2009.

Supplied in a box of 20.

PTDMOL2485