Personal Protection Equipment

Scan Premier Valved Disposable Masks with an exhalation valve to make breathing easier and an adjustable nose clip with soft foam nosepiece giving a custom fitting. Complete with a non-irritating inner face piece for added comfort.

FFP1 protection level, the mask is suitable with protecting from particles larger than 5 microns such as general dust and waterbased sprays and paint mist. Conforms to EN 149:2001+A1:2009.

3 x Scan Moulded Disposable Masks Valved FFP1 Protection

PTDSCAPPEP1MV

Scan directly ventilated goggles that will withstand medium energy high-speed impacts up to 120m/s (270mph). Large size direct ventilation through frame. Compact lightweight construction, can be worn over spectacles. Tough polycarbonate UV resistant lens.

Elasticated headstrap with soft vinyl flanges around the goggles ensure comfort and conformity to facial contour.

Conform to EN166:1B.

PTDSCAPPEGDV

Twin Half Mask Respirator. A premium half mask, offering maximum protection and comfort. An extra wide sealing surface gives unparalleled comfort and fit.
Low resistance exhalation valve for easy breathing. Durable thermoplastic rubber mask and wide adjustable elastic strap make for a perfect fit. Fully adjustable 4-point cradle suspension ensuring an effective fit. Low profile angular filter design for minimal visual impairment. Manufactured from hypo-allergenic medical grade PVC.

SCAPPERESPA1 Supplied with A1 cartridges for organic vapours and gases, Conforms to EN140:1998 and EN14387:2004

SCAPPERESPP2 Supplied with P2 dust filter cartridges, Conforms to EN140:1998 and EN143:2000/A1:2006

The SCAPPERESPP2 Twin Half Mask Respirator is supplied with two P2 Dust Filter Cartridges.
Conforms to EN140:1998 EN143:2000/A1:2006.

PTDSCAPPERESPP2

Moldex Reusable Rockets Earplugs are suitable for protection against long-term exposure. These plugs can be cleaned and reused over longer periods. Dual material composition ensures easy insertion and maximum comfort. With an air bubble in the tip and soft material to provide a comfortable seal. They are supplied in a handy storage container to keep the plugs hygienic between use.

Has a signal to noise ratio (SNR) of 30 dB.

PTDMOL6400

The Moldex MOL7060 Wall mount for Moldex Stations. The Moldex Station is made of durable plastic and can be replaced in one easy step.

Please note that the mounting bracket comes separately.

PTDMOL7060

The Moldex MOL7625 Disposable Foam Earplugs Mellows Station contains 250 pairs of mellow earplugs. The station is made from recyclable material and with only 2% wastage, the dispenser puts protection at the centre of the workforce. The plugs remain hygienic as the dispenser mechanism is automatically replaced with every refill.

The mellows are made from soft material that is easy to insert and offers protection against lower noise levels. The Disposable Foam Earplugs Mellows Station is designed to keep you in touch with your environment and aid communication.

Please note that the 7060 mounting bracket is sold separately.

Has a signal to noise ratio (SNR) of 22 dB.

PTDMOL7625

These Moldex Comfortable PU Foam Earplugs protect against long-term exposure. The contored shape makes them easy to insert.

Comes with a pocket pack storage container and five pairs of earplugs.

Has a signal to noise ratio (SNR) of 35 dB.

PTDMOL7812

This Scan Collapsible Ear Defender is suitable general purpose. It is effective in reducing noise levels, whilst still allowing the wearer to hear normal conversation. The soft and wide PVC ear cushions enhance comfort, and the adjustable cup height is designed to fit the majority of wearers. The defender is foldable for easy storage.

Conforms to EN352-1:2002.

SNR 28dB - Single Number Rating (SNR) =the number of decibels reduced by the product.

PTDSCAPPEEARCOL

This lightweight Scan ear defender with slimline ear cups is ideal for general purpose. The soft and wide PVC ear cushions, combined with the flexible headband with foam padding and adjustable cup height ensure a comfortable fit. It is effective in reducing noise levels whilst still allowing the wearer to continue hearing normal conversation.

Conforms to EN352-1: 1993.

SNR 29dB - Single Number Rating (SNR) =the number of decibels reduced by the product.

PTDSCAPPEEARDEF

Scan FFP2 Premier Valved Odour Disposable Masks have active carbon cover pre-filters, which protect lungs against organic vapour and gas below the Occupational Exposure Limits. Designed to cover the nose, mouth and chin. The construction is made of the filter material itself, and the exhalation valve allows for easy breathing.

The masks have elasticated retaining straps to keep them securely in place. In addition they have an adjustable nose clip and soft foam nose piece for custom fitting.

To be disposed of after each period of work or 4 hour shift.

FFP2 protection level, for protecting against particles of between 2-5 microns. Uses: painting, varnishing odours, brick dust, cermaic tile dust, hand sanding of wood and MDF and loft insulation.

Conform to EN149:2001 and A1:2009.

PTDSCAPPEP2OMV

Moldex Rockets Corded Reusable Earplugs are suitable for protection against long-term exposure. These plugs can be cleaned and reused over longer periods. Dual material composition ensures easy insertion and maximum comfort. The cord is manufactured as an integral part of the plug.

With an air bubble in the tip and soft material to provide a comfortable seal. They are supplied in a handy PocketPak storage container to keep the plugs hygienic between use.

Has a signal to noise ratio (SNR) of 30 dB.

50 x Pairs of Moldex Rockets Corded Reusable Earplugs SNR 30 dB

PTDMOL6401

The Moldex 5000 Series Disposable Half Masks have integral gas filters, making the mask disposable and exempt from the maintenance requirements of COSHH if disposed of within one month. When particulate filters get clogged they can be replaced for prolonged use of the mask.

ABEK1 protection against organic [boiling point >65C] + inorganic gases & vapours, acid gases and ammonia. Plus P3 protection against harmful and toxic dusts, fumes and aerosols based on water and oil.

10 x Workplace exposure limit (half mask)
or 1000 ppm whichever is lower.

PTDMOL598401

Moldex EasyLock Filters for Series 7000 & 9000 masks. No need for additional clips or holders, different gas and particulate filters can be combined. EasyLock particulate filters can either be connected to the EasyLock gas cartridge or directly to the mask body. Adaptors or particulate pre-filters are not necessary.

ABEK1 protection against organic [boiling point >65C] + inorganic gases & vapours, acid gases and ammonia. Plus P3 protection against harmful and toxic dusts, fumes and aerosols based on water and oil.

10 x Workplace Exposure Limit (Half Mask).
20 x Workplace Exposure Limit (Full Face Mask).
OR 1000 ppm whichever is lower.

Tested and certified to EN 14387:2004+A1:2008.

Wrap of 2 Moldex EasyLock ABEK1P3 R D Pre-assembled Filter

PTDMOL9430

The Moldex Ultra Light Series 7000 Half Mask is extremely lightweight and the mask body is made from hypoallergenic material, which is gentle on the skin. The low profile design offers excellent field of vision. Easily accessible components for cleaning and maintenance.

Use with the Moldex EasyLock Filter system that requires no additional clips or holders.

Size: Medium

1 x Moldex MOL7002 Ultra Light Series 7000 Half Face Mask (Medium)

Filter cartridges NOT included.

PTDMOL7002

The Moldex Ultra Light Comfort Series 9000 Full Face Mask is extremely lightweight with excellent periphery vision. The lens is made from scratch resistant polycarbonate and is easy to clean thanks to the hydrophobic coating. Offering easy maintenance due to easily accessible components.

Use with Moldex EasyLock Filter system that requires no additional clips or holders.

Class 2, Size: Medium.

Filter cartridges NOT included.

PTDMOL9002