Crow Pry & Wrecking Bars

The Roughneck Roofing Gorilla Bar has a flat anvil on the neck which can be struck by a hammer. The bar can also be used as a hammer. Fitted with a moulded, double injected soft grip handle for increased comfort.

PTDROU64403

The Hultafors F430 Wrecking Bar is manufactured from aluminium with a cone-shaped point. Used when aligning flanges with bolt holes and for bending copper pipes with care. The bar is inserted in the pipe which is then heated up and bent to shape. This prevents damage to the actual pipe end. Very common when fitting car body components. Aluminium is easier and more comfortable to work with, does not rust and can handle the cold better.

PTDHULF430

The Hulfafors 108 Wrecking Bar is a small, versatile steel wrecking bar that can be used for pulling out nails and for breaking, scraping and lifting. It has three different functions for pulling out nails and its wide, ground contact surfaces and thin ends make it easy to use in narrow spaces and reduce the risk of leaving marks.

Length: 380mm (15in).
Weight: 650g.

PTDHUL10815

The Hultafors 108 Mini Wrecking Bar can be used to pull small nails, strips of wood, or open cans. It has three different functions for pulling out nails and the thin contact surfaces make it easy to use in narrow spaces.

Length: 190mm (7.1/2in).
Weight: 77g.

PTDHUL108MINI

The Hultafors 109 Series Wrecking Bars are manufactured from hardened, high-alloy boron steel and have wide, ground contact surfaces and thin ends making them easy to use in narrow spaces and reducing the risk of leaving marks. The claw is optimised for pulling out nails.

1 x Hultafors 109/12 Steel Wrecking Bar 300mm (12in)

PTDHUL10912

The Hultafors 109 Series Wrecking Bars are manufactured from hardened, high-alloy boron steel and have wide, ground contact surfaces and thin ends making them easy to use in narrow spaces and reducing the risk of leaving marks. The claw is optimised for pulling out nails.

1 x Hultafors 109/20 Steel Wrecking Bar 500mm (20in)

PTDHUL10920

The Hultafors 109 Series Wrecking Bars are manufactured from hardened, high-alloy boron steel and have wide, ground contact surfaces and thin ends making them easy to use in narrow spaces and reducing the risk of leaving marks. The claw is optimised for pulling out nails.

1 x Hultafors 109/28 Steel Wrecking Bar 710mm (28in)

PTDHUL10928

The Hultafors 109 Series Wrecking Bars are manufactured from hardened, high-alloy boron steel and have wide, ground contact surfaces and thin ends making them easy to use in narrow spaces and reducing the risk of leaving marks. The claw is optimised for pulling out nails.

1 x Hultafors 109/36 Steel Wrecking Bar 900mm (36in)

PTDHUL10936

The Stanley FatMax Spring Steel Wrecking Bar is an ideal tool for all builders, carpenters and plumbers and is widely used in factories, warehouses and the farming industry. Manufactured from round spring steel, which is hardened and tempered to ensure maximum strength and durability, and with double ended claw ends.

Ideal for opening packing cases, pulling out nails, levering off, shuttering etc.

1 x Stanley FatMax Spring Steel Wrecking Bar 760mm (30in)

PTDSTA155513

The Stanley FatMax Spring Steel Wonder Bar is manufactured from lightweight yet durable spring steel. With a high visibility powder coated finish and polished tips. They have wider prying edges for better load spread, and sharpened pointed prying claws for easy access to sunken nails.

Specification

Length: 380mm (15in)

PTDSTA155516

The Roughneck Aligning Bars are made from drop-forged alloy steel, hardened and tempered and with a hexagonal shank and polished tips.

Ideal for aligning bolt holes during steel construction.

1 x Roughneck Black Aligning Bar 610mm (24in)

PTDROU64454

Roughneck Utility Bars are manufactured from stamped alloy steel that has been hardened and tempered. They have a painted and powder-coated finish with polished tips and an integral nail puller to remove embedded nails.

1 x Roughneck Mini Utility Bar 175mm (7in)

PTDROU64494

Roughneck Utility Bars are manufactured from stamped alloy steel that has been hardened and tempered. They have a painted and powder-coated finish with polished tips and an integral nail puller to remove embedded nails.

1 x Roughneck Utility Bar 380mm (15in)

PTDROU64495

Roughneck Utility Bars are manufactured from stamped alloy steel that has been hardened and tempered. They have a painted and powder-coated finish with polished tips and an integral nail puller to remove embedded nails.

1 x Roughneck Utility Bar 450mm (18in)

PTDROU64496

The Roughneck Gorilla Bar has a low profile claw that fits further under the workpiece for increased prying power and the wider claw surface offers better control whilst resisting sinking into the support surface.

Made from drop-forged alloy steel hardened and tempered, with polished tips, and oval shaped for better control and strength.

1 x Roughneck Gorilla Bar Junior 356mm (14in)

PTDROU64405