Hardware & Fixings

The Faithfull S-Hooks are made from low carbon steel and zinc plated for resistance to corrosion. The hooks are ideal for attaching accessories to chain when low working loads are involved.

PTDGRPFAICHSH30

This Forge Auto Gate Latch will automatically latch when the gate is pulled to the closed position. Ideal for gates in fields where easy access is preferred over security. Also used widely for garden gates.

Supplied with all fixings and fitting instructions.

Fitting Instructions:
1. Position the keep on the fence post and mark the fixing holes with a pencil. Drill pilot holes with a 2mm drillbit and fasten in place using screws provided.
2. with the gate closed, position the latch arm so that it is engaged in the lock and screw into position using the fixings supplied.

PTDGRPFGEAUTOGLBL

Forge Steel Corner Braces for joining two pieces of wood at right angles and for supporting cupboard joints.

Zinc plated and pre-drilled for fixing.

Fitting Instructions: Use to support joints in cupboard assembly.

PTDGRPFGEBRACBR25

Forge Steel Corner Plates for joining and supporting pieces of timber.

Zinc plated and pre-drilled for fixing.

Fitting Instructions: Use to support joints in cupboard assembly.

PTDGRPFGEBRACPL50

Forge traditionally shaped Handrail Bracket for domestic use.

Supplied with all fixings.

Fitting Instructions:
1. Measure up from the lowest step and mark a height at 100 to 120cm. Repeat at the top step.
2. Use a chalk line to create a straight line accross these two points.
3. Measure points equally along this line no further than 120cm apart.
4. Screw brackets to the wall using fixings suitable for the surface.

PTDGRPFGEBRAKHRAL

Forge Steel Mending Plates for joining two pieces of timber or reparing broken timber such as in fencing.

Zinc plated and pre-drilled for fixing.

Fitting Instructions: Use to support joints in cupboard assembly.

PTDGRPFGEBRAMND75

This Forge strong wire Cabin Hook is ideal for securing or holding back doors or gates. Black powder coated for outdoor use.

Supplied with all fixings and fitting instructions.

Fitting Instructions:
1. Place cabin hook in the desired position, and mark fixing holes with a pencil.
2. Use the screws provided to secure in place, additional fixings may be required for brick or plasterboard surfaces.
3. Place the keep on the hook end and position so that the door is secured as desired and screw into postion.

PTDGRPFGECABHBJ4

This Forge traditional silent Cabin Hook is suitable for heavy-duty applications. The tight fitting hook and eye prevents movement hence the silent application. Made from solid brass and supplied with all fixings and fitting instructions.

Fitting Instructions:
1. Place cabin hook in the desired position, and mark fixing holes with a pencil.
2. Use the screws provided to secure in place, additional fixings may be required for brick or plasterboard surfaces.
3. Place the keep on the hook end and position so that the door is secured as desired and screw into postion.

PTDGRPFGECABSILBR4

Forge black powder coated light pattern steel fixed Pin Butt Hinges in traditional pattern.

Supplied with all fixings and fitting instructions.

Pack of 2.

Fitting Instructions:
1. Position hinges on door surface and mark around hinge body using a sharp pencil.
2. Use a chisel to rebate door edge so that hinges sit flush with surface.
3. Repostion hinge, mark and drill fixing holes and screw into postion.
4. Line door up with the door frame and mark around the hinge body. Repeat steps 2 & 3 on door frame.

PTDGRPFGEHNGBTBL75

Forge light pattern steel fixed Pin Butt Hinges in traditional pattern.

Supplied with all fixings and fitting instructions.

Pack of 2.

Fitting Instructions:
1. Position hinges on door surface and mark around hinge body using a sharp pencil.
2. Use a chisel to rebate door edge so that hinges sit flush with surface.
3. Reposition hinge, mark and drill fixing holes and screw into position.
4. Line door up with the door frame and mark around the hinge body. Repeat steps 2 & 3 on door frame.

PTDGRPFGEHNGBTBP25