Locking Clamps

IRWIN Vise-Grip 18DR locking C-Clamp has an exceptionally large throat width of 190mm (7.1/2in), which allows objects up to 10in wide to be gripped, depending on the jaw opening.

Locking C-Clamps reach into places where ordinary clamps cannot be used. Fitted with regular tips they are ideal for car body work, welding and sheet metal work. Hex key adjusting screw that tightens to draw materials closer together and also provides controlled release.

Specification

Length: 455mm (18in).
Throat Depth: 250mm (10in).
Capacity: 190mm (7.1/2in).

PTDVIS18DR

IRWIN Vise-Grip Locking C-Clamps reach into places where ordinary clamps cannot be used.

Fitted with regular tips they are ideal for car body work, welding and sheet metal work.

Hex key adjusting screw that tightens to draw materials closer together and also provides controlled release.

Visegrip Irwin 11R Locking C-Clamp Regular Tip.

Length: 275mm (11in).
Throat Depth: 67mm(2.5/8in).
Capacity: 102mm (4in).

PTDVIS11R

IRWIN Vise-Grip 24R Locking C-Clamp 600mm (24in) can reach into places where ordinary clamps cannot be used. Fitted with regular tips, they are ideal for car body work, welding and sheet metal work.

It has a Hex key adjusting screw that tightens to draw materials closer together and also provides controlled release.

Specification

Length: 600mm (24in).
Throat Depth: 390mm (15.1/2in).
Capacity: 254mm (10in).

PTDVIS24R

IRWIN Vise-Grip Locking C-Clamps reach into places where ordinary clamps cannot be used.

Swivel pads are fitted to prevent damage to soft materials and are designed to hold irregular or tapered work.

Hex key adjusting screw that tightens to draw materials closer together and also provides controlled release.

Visegrip Irwin 4SP Locking C-Clamp Swivel Pad.

Length: 100mm (4in).
Throat Diameter: 25mm (1in).
Capacity: 38mm (1 1/2in).

PTDVIS4SP

IRWIN Vise-Grip Locking C-Clamps reach into places where ordinary clamps cannot be used.

Swivel pads are fitted to prevent damage to soft materials and are designed to hold irregular or tapered work.

Hex key adjusting screw that tightens to draw materials closer together and also provides controlled release.

Visegrip Irwin 18SP Locking C-Clamp Swivel Pad.

Length: 450mm (18in).
Throat Diameter: 240mm (9 1/2in).
Capacity: 203mm (8in).

PTDVIS18SP

IRWIN Vise-Grip Locking C-Clamps reach into places where ordinary clamps cannot be used.

Swivel pads are fitted to prevent damage to soft materials and are designed to hold irregular or tapered work.

Hex key adjusting screw that tightens to draw materials closer together and also provides controlled release.

Visegrip Irwin 24SP Locking C-Clamp Swivel Pad.

Length: 600mm (24in).
Throat Depth: 390mm (15 1/2in).
Capacity: 254mm (10in).

PTDVIS24SP

A deep throat, C-Clamp Mole grip which is ideal for large, bulkier items where more clamping capacity is needed. The jaws swivel to allow an even, parallel clamping force and the body is chrome plated to resist corrosion.

The knurled screw at the base of the handle adjusts the clamping pressure and the non- pinching pull jaw release lever improves safety and ease of opening.

1 x Stanley Locking C-Clamp Swivel Tips 170mm (7in)

PTDSTA084815

The IRWIN Vise-Grip Locking pinch-off tool 175mm (7in) provides a temporary seal when applied to tubing, leaving both hands free for other work. Perfect to use for plumbing work as it stops the flow from untidy tubes.

Hex key adjusting screw that tightens to draw materials closer together and also provides controlled release. This tool is specially designed for the refrigeration industry.

Specification

Length: 175mm (7in).
Capacity: 6mm.

PTDVISRR

The IRWIN Vise-Grip locking sheet metal tool makes all kinds of bending, forming and crimping jobs on sheet metal easier.

Hex key adjusting screw that tightens to draw materials closer together and also provides controlled release.

Specification

Length: 200mm (8in).
Capacity: 78mm.

PTDVIS8R

A deep throat, C-Clamp Mole grip which is ideal for large, bulkier items where more clamping capacity is needed. The jaws swivel to allow an even, parallel clamping force and the body is chrome plated to resist corrosion.

The knurled screw at the base of the handle adjusts the clamping pressure and the non- pinching pull jaw release lever improves safety and ease of opening.

Length 285mm (11 1/4 in)

PTDSTA084816

Faithfull Butt Welding Clamps are an essential accessory for aligning sheet metal panels edge-to-edge and surface-to-surface. They provide the correct gap to help produce clean welds, requiring minimal grinding after completion. The clamps are simple to use for assembling and fabricating.

Ideal for use when welding patch repairs in floors, wings, door skins or fabricating panels on reskinning projects. These versatile clamps will hold flat, curved and pressed ribbed panels.

Using the clamps to assemble the workpiece:

Slacken the wing nut allowing space for the metal sheets to locate between the base of the clamp, with the toggle bar underneath.

Tighten the wing nut to pull the toggle bar up locking the two sheets together side by side.

Once the two sections have been tack welded together, the wing nut can be slackened and the toggle bar removed, the clamp can then be lifted from the job prior to final welding.

PTDFAIBWCLAMPS4

A deep throat, C-Clamp Mole grip which is ideal for large, bulkier items where more clamping capacity is needed. The jaws swivel to allow an even, parallel clamping force and the body is chrome plated to resist corrosion.

The knurled screw at the base of the handle adjusts the clamping pressure and the non- pinching pull jaw release lever improves safety and ease of opening.

PTDGRPSTA084815

IRWIN Vise-Grip Fast-Release C-Clamp with regular tips and an easily controlled one-handed opening mechanism. With increased finger room, these clamps are ideal for tradesmen who prefer to work with gloves.

Holds up under extreme conditions such as welding and hammer strikes.

Easier controlled opening which is release is controlled and can be operated with one hand. Easier to open from any angle by simply pulling. No need to put pressure on a trigger.

More finger room this better accommodates large hands and professional tradesmen who wear gloves.

Features no pinch points through the elimination of trigger means no pinching during release.

New ProTouch grips feature a hex adjusting screw that allows for fine adjustment and additional controlled release of the tool.

PTDGRPVIS10507190

IRWIN Vise-Grip Locking C-Clamps reach into places where ordinary clamps cannot be used.

Fitted with regular tips they are ideal for car body work, welding and sheet metal work.

Hex key adjusting screw that tightens to draw materials closer together and also provides controlled release.

PTDGRPVIS6R

IRWIN Vise-Grip Locking C-Clamps reach into places where ordinary clamps cannot be used.

Swivel pads are fitted to prevent damage to soft materials and are designed to hold irregular or tapered work.

Hex key adjusting screw that tightens to draw materials closer together and also provides controlled release.

PTDGRPVIS4SP