Bent Nose Pliers

IRWIN Vise-Grip 40 Bent Long Nose Pliers have an induction hardened chrome nickel steel cutting face that stays sharper for longer and improves durability.

Grooved jaws provide maximum gripping strength whilst the moulded ProTouch grips provide extra comfort and less hand fatigue.

Length: 150mm (6in)

PTDVIS10505505

IRWIN Vise-Grip 40 Bent Long Nose Pliers have an induction hardened chrome nickel steel cutting face that stays sharper for longer and improves durability.

Grooved jaws provide maximum gripping strength whilst the moulded ProTouch grips provide extra comfort and less hand fatigue.

Length: 200mm (8in)

PTDVIS10505506

The Stanley FatMax Bent Snipe Nose Pliers are made from a heat treated high chrome steel forging for long life and durability. With a high frequency heat treated cutting edge for accuracy. Interlocking joint assembly for smooth cutting. Fitted with bi-material handles with secure grip grooving. The long, half round section gripping jaws are ideal for forming loops with wire or thin strips of metal.

1 x Stanley FatMax Bent Snipe Nose Pliers 160mm (6.1/4in)

PTDSTA089871

The Stanley FatMax Bent Snipe Nose Pliers are made from a heat treated high chrome steel forging for long life and durability. With a high frequency heat treated cutting edge for accuracy. Interlocking joint assembly for smooth cutting. Fitted with bi-material handles with secure grip grooving. The long, half round section gripping jaws are ideal for forming loops with wire or thin strips of metal.

Size: 200mm (8 in)

PTDSTA089872

Bahco Bent Snipe Nose Plier with ERGO handles for comfort. The tips angled at 60, and slim, semi-circular shaped serrated jaws. Accurately machined jaws provide a sure grip on the workpiece. Tips give good grip and improved accessibility in confined spaces. Sharp edges for cutting softer material such as copper wire and plastic insulated wire.

Equipped with return spring with on/off function.

Specification
Length: 160mm (6.1/4in).
Jaw length: 46mm.
Weight: 170g.

PTDBAH2427G160

IRWIN Vise-Grip 40 Bent Long Nose Pliers have an induction hardened chrome nickel steel cutting face that stays sharper for longer and improves durability.

Grooved jaws provide maximum gripping strength whilst the moulded ProTouch grips provide extra comfort and less hand fatigue.

PTDGRPVIS10505505

The Knipex 26 21 200 bent long nose side cutters have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter up to 2.2mm and medium wire diameter up to 3.2 mm.

The cutting edges are separately induction hardened for durabilty and longer working life and are hardend to approximately 61HRC.

The jaws are angled at 40 and are ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicles applications.

Knipex have used a good quality special tool steel material that is oil hardened.

Dipped handles.

The Knipex 26 22 200 bent long nose side cutters have Bi-material, 2-component handles for a more comfortable and positive grip. They have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter up to 2.2mm and medium wire diameter up to 3.2 mm.

The cutting edges are separately induction hardened for durabilty and longer working life and are hardend to approximately 61HRC.

The jaws are angled at 40 and are ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicles applications.

Knipex have used a good quality special tool steel material that is oil hardened.

Hard wire diameter: 2.2 mm.
Medium wire diameter: 3.2 mm.
Hardness approx. 61HRC.
Length. 200 mm.

PTDKPX2622200

The Knipex 26 21 200 bent long nose side cutters have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter up to 2.2mm and medium wire diameter up to 3.2 mm.

The cutting edges are separately induction hardened for durabilty and longer working life and are hardend to approximately 61HRC.

The jaws are angled at 40 and are ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicles applications.

Knipex have used a good quality special tool steel material that is oil hardened.

Dipped handles.

PTDGRPKPX2621200

The Stanley FatMax Bent Snipe Nose Pliers are made from a heat treated high chrome steel forging for long life and durability. With a high frequency heat treated cutting edge for accuracy. Interlocking joint assembly for smooth cutting. Fitted with bi-material handles with secure grip grooving. The long, half round section gripping jaws are ideal for forming loops with wire or thin strips of metal.

PTDGRPSTA089871

These Stanley Long Bent Nose Pliers are made from drop forged steel for high strength and durability. The handles are made from polypropylene with TPR overlay. Their zone configuration provides added power, comfort and control.

Size: 150mm.

PTDSTA075065

These Stanley Long Bent Nose Pliers are made from drop forged steel for high strength and durability. The handles are made from polypropylene with TPR overlay. Their zone configuration provides added power, comfort and control.

PTDGRPSTA075065

Bahco Bent Snipe Nose Pliers with semi-circular shaped jaws and serrated contact surfaces. The cutting edge is suitable for severing soft material such as copper and plastic insulated wire.

PTDBAH2477G200

The IRWIN Vise-Grip Bent Nose Pliers are constructed of high-quality steel and are specially coated for superior rust-resistance and longer tool life. The induction-hardened cutting edges are durable enough to cut ACSR, nails, screws and even piano wire without damaging the cutting edge.

They are fitted with industry-leading, three-zone comfort grips that have been contoured for optimal cushion and control allowing the user to make more cuts comfortably. Integrated handle hooks for the Performance Lanyard system, for safer elevated working conditions and easier retrieval when stored.

They are made in Germany and backed by IRWINs Lifetime Guarantee.

Capacity: 2mm Hard Wire.

PTDVIS1950509

These Stanley Long Bent Nose Pliers are made from drop forged steel for high strength and durability. The handles are made from polypropylene with TPR overlay. Their zone configuration provides added power, comfort and control.

Size: 200mm.

PTDSTA075066

The Knipex 26 21 200 bent long nose side cutters have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter up to 2.2mm and medium wire diameter up to 3.2 mm.

The cutting edges are separately induction hardened for durabilty and longer working life and are hardend to approximately 61HRC.

The jaws are angled at 40 and are ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicles applications.

Knipex have used a good quality special tool steel material that is oil hardened.

Dipped handles.

Length: 200mm (8 in).
Hard wire diameter: 2.2 mm.
Medium wire diameter: 3.2 mm.

PTDKPX2621200