Saws

This Trend Folding Pocket Flush Saw is suitable for cutting dowels, plugs and dovetails.
Manufactured in Japan, the non-set teeth can cut right at the surface without marking the surface, which makes it ideal for dowel trimming and dovetail joint trimming.
The blade is 0.4mm thick, which allows flexibility to allow cutting flush with the surface. The 120mm blade has a fine polished finish with 22 TPI (1.15mm pitch) and cuts on the pull stroke and is made from high carbon steel with an impulse hardened edge for long life.
The saw handle is made from soft touch elastomer-plastic and includes a hanging hole for easy storage in the workshop.

PTDTREFFS120

The Roughneck Hardpoint Handsaws have triple ground teeth for faster cutting. The teeth are heat treated for a longer lasting cutting edge.

The saws have a double injected soft grip handle for comfort and hand protection. The handle is shaped to allow 90 and 45 cutting.

Suitable for cutting hardwood, softwood, rough timber, board sheet, wooden worktop and floorboard.

The Roughneck ROU34420 R20C Hardpoint Handsaw has the following specifications:
Length: 500mm (20 inch).
Teeth: 8TPI (Coarse).
Blade thickness: 1mm.

PTDROU34420

The Roughneck Hardpoint Handsaws have triple ground teeth for faster cutting. The teeth are heat treated for a longer lasting cutting edge.

The saws have a double injected soft grip handle for comfort and hand protection. The handle is shaped to allow 90 and 45 cutting.

Suitable for cutting hardwood, softwood, rough timber, board sheet, wooden worktop and floorboard.

The Roughneck ROU34422 R22C Hardpoint Handsaw has the following specifications:
Length: 550mm (22 inch).
Teeth: 8TPI (Coarse).
Blade thickness: 1mm.

PTDROU34422

The Roughneck Hardpoint Handsaws have triple ground teeth for faster cutting. The teeth are heat treated for a longer lasting cutting edge.

The saws have a double injected soft grip handle for comfort and hand protection. The handle is shaped to allow 90 and 45 cutting.

Suitable for cutting hardwood, softwood, rough timber, board sheet, wooden worktop and floorboard.

The Roughneck ROU34424 R22F Hardpoint Handsaw has the following specifications:
Length: 550mm (22 inch).
Teeth: 11TPI (Fine).
Blade thickness: 1mm.

PTDROU34424

Roughneck Toolbox Saw with triple ground teeth, which are heat treated for faster cutting and a longer lasting cutting edge. With double injected soft-grip handle for comfort and hand protection, which is shaped to allow cutting at 90 and 45.

Suitable for cutting hardwood, softwood, rough timber, board sheet, worktop, floorboard, melamine and PVC.

Blade Thickness: 1mm.
Teeth: 10 tpi.

Length: 325mm (13in)
Teeth: 10tpi.

PTDROU34433

This Roughneck ROU34442 Tenon Saw has triple ground teeth for faster cutting. These teeth are heat treated teeth for a longer lasting cutting edge.

The saw has a double injected soft-grip handle for comfort and hand protection. The handle is shaped to allow 90 and 45 cutting.

The saw is suitable for cutting hardwood, softwood, rough timber, board sheet, worktop, floorboard, melamine and PVC.

Blade Length: 300mm (12in).
Blade Thickness: 1mm.
Teeth: 11 tpi.

PTDROU34442

The Roughneck ROU34453 R13VF Hardpoint Veneer Saw has triple ground teeth for faster cutting. The teeth are heat treated for a longer lasting cutting edge.

The saw has a double injected soft grip handle for comfort and hand protection. The handle is shaped to allow 90 and 45 cutting.

The saw is suitable for cutting hardwood, softwood, rough timber, board sheet, worktop, floorboard, melamine and PVC.

Blade Length: 325mm (13in).
Blade Thickness: 1mm.
Teeth: 11 tpi.

PTDROU34453

The Roughneck ROU34460 R33 Masonry Saw has 33 teeth with Tungsten Carbide tips for strength and durability. The saw has a double injected soft grip handle for comfort and hand protection. It is suitable for cutting cellular concrete blocks and breeze blocks.

Specification

Length: 700mm (28in).
Blade Thickness: 1.5mm.

PTDROU34460

The Roughneck ROU34470 Hardpoint Padsaw has triple ground teeth, which are heat-treated for faster cutting and a long-lasting cutting edge. With a bi-material handle for improved comfort.

Suitable for cutting hardwood, softwood, rough timber, board sheet, worktop, and floorboard.

Specification:

Blade Length: 150mm (6in)
Blade Thickness: 1.5mm
Teeth: 7 TPI

PTDROU34470

The Vaughan Double edged Japanese-style Bear saw that cuts on the pull stroke. Made from spring steel and plated for rust resistance. It is highly flexible to allow flush cutting. The blade is interchangeable with other Bear Saw blades and locks securely, yet can be easily disassembled for convenient storage.

The specially ground, triple edged teeth are impulse hardened to retain sharpness.

Available in: 150mm (6in) and 250mm (10in) blade lengths.

Made in Japan.

PTDGRPVAUBS250D

The Stanley FatMax Hardened and tempered blade for durability and long life. Moulded handle combining high impact plastic and soft touch inserts for improved comfort and control. Large smooth end pad to facilitate pushing and twisting blade through plasterboard. Sharp point for piercing board. Aggressive triple bevel teeth for a faster cleaner cut.

Blade Length: 150mm (6in).
Teeth 7 TPI.

PTDGRPSTA020556

The Stanley FatMax Tenon Saw provides extra rigidity enabling a straighter cut. The triple edged teeth cut on both push and pull strokes for ease of cutting and are also induction hardened. It has 45 and 90 angle quick reference points and a bi-material handle for improved grip and comfort.

PTDGRPSTA517199

The Stanley FatMax fine cut handsaws have a bi-material handle screwed and ultrasonically welded for comfort and security.

The teeth are precision set to generate clearance of kerf for the blade to cut on both the forward and back stroke, increasing cutting efficiency by 30%. These 3 sided teeth are precision ground to offer razor sharp cutting edges at every stage of the stroke. They are induction hardened to stay sharper for longer.

Fine cut blade 11 TPI.

PTDGRPSTA515594

The Stanley FatMax heavy-duty saws have Bi-material handles which are screwed and ultrasonically welded for comfort and security, and allow cutting at 90 and 45.

The teeth are precision set to generate clearance of kerf for the blade to cut on both the forward and back stroke, increasing cutting efficiency by 30%. These 3 sided teeth are precision ground to offer razor sharp cutting edges at every stage of the stroke. They are induction hardened to stay sharper for longer.

7 TPI.

PTDGRPSTA515288

Precision ground, super-efficient bi-metal blade that is faster and lasts longer on tough materials. The high-speed steel cutting edge is welded to a tough alloy steel back that provides optimum tool life together with a high resistance to breakage. Blade cross section 13 x 0.65 mm (1/2 x 0.025 Inch).

Blade length: 300mm (12in).

PTDGRPSTRBS1214