Nails

Senco branded, galvanised, round cross-section ring shank, GE Ring Stripnail Nails for structural timber products. Made from non-alloy steel according to EN10016 and also comes with 2 Gas Fuel Cells.

PTDGRPSENGE51AXBKRFC

Senco branded, galvanised, round cross-section ring shank, GE Ring Stripnail Nails for structural timber products. Made from non-alloy steel according to EN10016 and also comes with 2 Gas Fuel Cells.

Applications

- Framing
- Sheathing
- Subfloor
- Decks
- Trusses and Pallets

Specifications

- Length: 75 mm
- Fastener Type: Stripnails
- Fastener Head: Clipped Head
- Point Type: Diamond
- Shank Type Fastener: Ring Shank
- Nominal Diameter: 3.10 mm
- Collation Angle: 34
- Wire Material: Galvanised 12 Micron/Extra Heavy Electro
- Finish: Sencoted
- Coating Type: Type 3
- Service Class: 2

75mm x 3.1mm Galvanised Ring Shanked Collated Stripnails (Box of 2,000 Nails + 2 Fuel Cells)

PTDSENHE57AXBKRFC

Forgefix Netting Staples are versatile staples with extra sharp points, ensuring quick insertion. They are galvanised for increased durability, as the staples are predominantly used on external applications.

APPLICATION:
For fastening all manner of wire and netting.
Used extensively in the fencing trades.

Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged.

PTDGRPFORNS15GB500

These Forgefix Annular Ring Shank Nails are ideal for where strength and holding power are of primary importance. The rings on the shank of the nail are sloped in a conical shape to ensure clean insertion but are then extremely difficult to release. They are suitable for both soft and hard wood.

The nails have a Bright finish, which is simply the basic raw mild steel material, without any coating or finish.

APPLICATION:
Used where permanent holding is preferred such as flooring applications.

PTDGRPFORAR20B500

These Forgefix Clout Nails have a large head, which distributes the load directly underneath the top of the nail, ensuring that roofing felt stays firm and secure. This reduces the risk of tearing.

The nails are galvanised for increased resistance to corrosion.
Suitable for roofing of all types.

APPLICATION:
Specifically used when roofing felt is being fitted to either shed or similar types of roofs.

Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged.

PTDGRPFORC30GB500

These Forgefix Cut Clasp Nails are specially designed for fitting floorboards. They are sometimes knowns as square nails, due to their rectangular shank shape.
The nails have a Bright finish, which is simply the basic raw mild steel material, without any coating or finish.

PTDGRPFORCC50B500

These Forgefix Felt Nails have a large head, which distributes the load directly underneath the top of the nail, ensuring that roofing felt stays firm and secure. This reduces the risk of tearing.

The nails are galvanised for increased resistance to corrosion.
Suitable for roofing of all types.

APPLICATION:
Specifically used when roofing felt is being fitted to either shed or similar types of roofs.

Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged.

PTDGRPFORF13GB500

These Forgefix Plasterboard nails are Zinc Yellow Passivated for corrosion resistance. They have indented shanks and countersunk heads, and can be used widely in many joinery applications.

APPLICATION:
The shape of the nail makes them ideal for fixing plasterboard and cladding.

The Zinc Yellow Passivation process of electroplating is similar to the Galvanised and Zinc Plated processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion.

Countersunk heads are designed to fit flush with substrates to leave a smooth surface finish. The twin threads main function is to enable an easy start when driving.

PTDGRPFORPN30ZYP21

These Forgefix Panel Pins are ideal for lightweight and decorative tasks. The shape of the pin helps to prevent splitting of hard or brittle timber.
The nails have a Bright finish, which is simply the basic raw mild steel material, without any coating or finish.

APPLICATION:
General cross section of joinery applications such as fixing decorative timber mouldings.

PTDGRPFORPP20B500

These Panel Pins are ideal for lightweight and decorative tasks. For corrosion resistance, the pins are sheradised.

The shape of the pins helps to reduce splitting in hard or brittle timber.

APPLICATION:
General cross section of joinery applications such as fixing decorative timber mouldings.

Sheradisation is the process of choice for fixings or fasteners that require long-term corrosion resistance. The sheradised finish is a thermal diffusion process, in which Zinc powder is vaporised and diffuses into the surface of the fastener or fixing to form a sacrificial corrosion protective Zinc /Iron alloy coating which dramatically increases the nails durability.

PTDGRPFORPP25SB500

These Forgefix Round Head Nails are multi-purpose nails, for use with both soft and hard timber materials. The nails have a Bright finish, which is simply the basic raw mild steel material, without any coating or finish.

APPLICATION:
These nails are the most popular type of nail, used in many joinery and construction applications.

PTDGRPFORRH25B500

These Forgefix Round Head Nails are multi-purpose nails, for use with both soft and hard timber materials. They are galvanised for increased durability.
Available in standard sizes, from 25mm to 150mm.

APPLICATION:
These nails are the most popular type of nail, used in many joinery and construction applications.

Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged.

PTDGRPFORRH40GB500

These Forgefix Twist Nails are a unique twisted shank nail for attaching metalwork joists, hangers, straps etc. The twisted shank assists in absorbing movement that may occur in construction. They have a sheradised finish for corrosion resistance. This finish is a thermal diffusion process, in which Zinc powder is vaporised and diffuses to the surface of the Twist Nail to form a sacrificial corrosion protective Zinc/Iron alloy coating, thus dramatically increasing the nails durability.

APPLICATION:
The Twist Nail is the most popular construction nail used in fixing of joist hangers, restraining straps and Galvanised banding.

PTDGRPFORT30GB500

These Forgefix Oval Lost Head Nails are versatile and ideal for use in general joinery. The nail head virtually disappears when punched below the timber surface, making them ideal for decorative type applications. The shape of the nail helps to prevent splitting of hard or brittle timber. The nails have a Bright finish, which is simply the basic raw mild steel material, without any coating or finish.

APPLICATION:
General cross section of joinery applications. By aligning the nail with the wood grain, splitting is reduced.

PTDGRPFOROH25B500

These Forgefix extra large Clout Nails have a larger head, which distributes the load directly underneath the top of the nail, ensuring that roofing felt stays firm and secure. This reduces the risk of tearing.

The nails are galvanised for increased resistance to corrosion.
Suitable for roofing of all types.

APPLICATION:
Specifically used when roofing felt is being fitted to either shed or smilar types of roofs.

Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged.

PTDGRPFORELH25GB50