Specialists Treatments

This Liberon Iron Paste is a black graphite paste used to protect and decorate cast and wrought ironwork. It does not flake off, and is suitable for home decorating. Especially suited to ornamental ironwork, cast iron grates, and fire irons. Ideal for renovating cast iron fire places and surrounds. Reducing the possibility of rusting, it bakes itself onto the surface, and can be buffed to a high shine.

Drying time: Minimum of 4 hours.

1 x Liberon Iron Paste 250ml

PTDLIBIP250

The Liberon Fine Wood Stripper removes old paint and varnish finishes from wood and metal. It is kind to wood and fragile surfaces as no heavy scraping is required. The easy to use, non-drip gel formulation clings to the surface making it ideal for vertical surfaces.

Performance:
- Strips paint and varnish from wood and metal.
- Tough on paint and varnish yet gentle on wood.
- Fast working time: 5-30 minutes.
- Non-drip: gel formulation.
- Usage: Interior

Coverage: 2m.
Working Time: 5-30 minutes.
Size: 500ml.

PTDLIBFWS500

The traditional method used to colour oak, mahogany and walnut.

Purpose
Liberon Van Dyck Crystals are a traditional and natural water based wood dye made from walnut husks. They produce a colour ranging from a very light brown to dark brown depending upon the concentration.

Performance
- Traditional method for colouring oak, mahogany and walnut.
- Natural dye made from walnut husks.
- Intensity of colour is controlled by the strength of dilution.

The Liberon LIBVDC250G Van Dyck Crystals comes in the following:
Pack size: 250g

PTDLIBVDC250G

The traditional method used to colour oak, mahogany and walnut.

Purpose
Liberon Van Dyck Crystals are a traditional and natural water based wood dye made from walnut husks. They produce a colour ranging from a very light brown to dark brown depending upon the concentration.

Performance
- Traditional method for colouring oak, mahogany and walnut.
- Natural dye made from walnut husks.
- Intensity of colour is controlled by the strength of dilution.

The Liberon LIBVDC500G Van Dyck Crystals comes in the following:
Pack Size 500g

PTDLIBVDC500G

This Liberon wood bleacher is ideal for removing dark stains caused by rust, alcohol, damp, ink, ring marks and fruit etc. It can also be used to lighten naturally dark wood, or natural wood which has darkened through alkali products, staining or weathering. It does not harm the wood and comes ready to use.

Coverage: Approx. 3-5m per 500ml
Application: Brush
Usage: Interior
Drying time: 10-30 minutes

LIBWB5L wood bleacher has a volume of 500ml.

PTDLIBWB500

The traditional method used to colour oak, mahogany and walnut.

Purpose
Liberon Van Dyck Crystals are a traditional and natural water based wood dye made from walnut husks. They produce a colour ranging from a very light brown to dark brown depending upon the concentration.

Performance
- Traditional method for colouring oak, mahogany and walnut.
- Natural dye made from walnut husks.
- Intensity of colour is controlled by the strength of dilution.

PTDGRPLIBVDC250G

This Liberon wood bleacher is ideal for removing dark stains caused by rust, alcohol, damp, ink, ring marks and fruit etc. It can also be used to lighten naturally dark wood, or natural wood which has darkened through alkali products, staining or weathering. It does not harm the wood and comes ready to use.

Coverage: Approx. 3-5m per 500ml
Application: Brush
Usage: Interior
Drying time: 10-30 minutes

PTDGRPLIBWB125

The Rustins Wood Bleach Set removes weather stains and discolourations. Makes bare wood white or lighter in colour. Use to bleach natural timber to a lighter shade so it can then be stained to another wood shade, using Rustins Wood Dyes.

Preparation:

Will only work on bare wood. All varnish, lacquer or polish must be removed before applying the solutions. Old finishes are best removed with Rustins Strypit Paint and Varnish Stripper.

Remove as much of the old finish as possible with a scraper, then damp the surface again with Strypit and rub with the grain with NO 1 or 2 steel wool. Wipe surface with clean rag and allow to dry.

Application:

Apply solution A to clean, dry wood with a brush and leave for 10-20 minutes before applying solution B.

Some woods will darken when solution A is applied. The actual bleaching takes place after application of solution B.

Coats: one coat of solution A followed by a coat of solution B.

Drying Time:

After application of solution B leave for a minimum of 2 hours. If the product dries out it can form crystals which can be very difficult to remove so ensure sufficient solution is applied to prevent drying out.

Re-coating Time: If the wood is very dark or badly stained, repeat application of both solutions after 2 hours.

PTDRUSWBS

The Everbuild Lead Mate Patination Oil has been specially formulated to provide a protective coating for newly installed leadwork that helps to prevent the white carbonate staining that affects new lead and surrounding tiles, brickwork, stonework etc.

Just one coat of Patination Oil also helps to provide a uniform, attractive appearance to newly installed lead. It is particularly important to treat areas of newly installed lead that are subject to water flowing over the surface onto surrounding areas as staining of tile and brick will be more severe in such circumstances. The no spill pack means no more spills or drips to clean up, and easier application.

PTDGRPEVBPATOIL1L

This Liberon Iron Paste is a black graphite paste used to protect and decorate cast and wrought ironwork. It does not flake off, and is suitable for home decorating. Especially suited to ornamental ironwork, cast iron grates, and fire irons. Ideal for renovating cast iron fire places and surrounds. Reducing the possibility of rusting, it bakes itself onto the surface, and can be buffed to a high shine.

Drying time: Minimum of 4 hours.

1 x Liberon Iron Paste 1 litre

PTDLIBIP1L

This Liberon Iron Paste is a black graphite paste used to protect and decorate cast and wrought ironwork. It does not flake off, and is suitable for home decorating. Especially suited to ornamental ironwork, cast iron grates, and fire irons. Ideal for renovating cast iron fire places and surrounds. Reducing the possibility of rusting, it bakes itself onto the surface, and can be buffed to a high shine.

Drying time: Minimum of 4 hours.

PTDGRPLIBIP1L

This Liberon wood bleacher is ideal for removing dark stains caused by rust, alcohol, damp, ink, ring marks and fruit etc. It can also be used to lighten naturally dark wood, or natural wood which has darkened through alkali products, staining or weathering. It does not harm the wood and comes ready to use.

Coverage: Approx. 3-5m per 500ml
Application: Brush
Usage: Interior
Drying time: 10-30 minutes

Pack Size 125ml

PTDLIBWB125

This Liberon wood bleacher is ideal for removing dark stains caused by rust, alcohol, damp, ink, ring marks and fruit etc. It can also be used to lighten naturally dark wood, or natural wood which has darkened through alkali products, staining or weathering. It does not harm the wood and comes ready to use.

Coverage: Approx. 3-5m per 500ml
Application: Brush
Usage: Interior
Drying time: 10-30 minutes

LIBWB5L wood bleacher has a volume of 5 litres.

PTDLIBWB5L

The Everbuild Lead Mate Patination Oil has been specially formulated to provide a protective coating for newly installed leadwork that helps to prevent the white carbonate staining that affects new lead and surrounding tiles, brickwork, stonework etc.

Just one coat of Patination Oil also helps to provide a uniform, attractive appearance to newly installed lead. It is particularly important to treat areas of newly installed lead that are subject to water flowing over the surface onto surrounding areas as staining of tile and brick will be more severe in such circumstances. The no spill pack means no more spills or drips to clean up, and easier application.

1 x Everbuild Lead Mate Patination Oil 1 litre

PTDEVBPATOIL1L

The Everbuild Lead Mate Patination Oil has been specially formulated to provide a protective coating for newly installed leadwork that helps to prevent the white carbonate staining that affects new lead and surrounding tiles, brickwork, stonework etc.

Just one coat of Patination Oil also helps to provide a uniform, attractive appearance to newly installed lead. It is particularly important to treat areas of newly installed lead that are subject to water flowing over the surface onto surrounding areas as staining of tile and brick will be more severe in such circumstances. The no spill pack means no more spills or drips to clean up, and easier application.

1 x Everbuild Lead Mate Patination Oil 500ml

PTDEVBPATOIL500