Clarke new Range

Ideal for any workshop, store, garage, office or home, this Clarke Boltless Shelving Unit is so quick and easy to assemble, it can be put together using only a mallet in a matter of minutes.

The CSM5350B doesnt require nuts and bolts, instead it utilises clever slot and pin locking mechanisms that are durable, hard wearing, easy to work with and more dynamic to look at than traditional nut and bolt fixings. This type of fixing is also a lot safer than traditional fixings, as the slot and pin fixings allow for a more rounded, rolled edge finish with no sharp edges.

This particular unit boasts an impressive 350kg load capacity per shelf (evenly distributed), so its perfect for storing larger items.

Specifications
- Supplied with 5 x 6mm Fibreboard Shelves
- Adjustable shelf height
- Shelf capacity: 350kg
- Shelving unit dimensions (WxDxH): 900 x 400 x 1800mm
- Bench dimensions (WxDxH): 1800 x 400 x 900mm
- Colour: Dark Grey
- Can be assembled as three different units - shelving, bench or corner unit
- Weight: 18.1kg

PTDCLA6600814

The Clarke CTILGB is a lightweight diecast aluminium tyre inflator with steel operating lever. This model benefits from a dual scale linear gauge capable of delivering 0-139 psi (0-9.6bar) and is completed with a robust build for ensured reliability.

Specifications
- Diecast aluminium manufacture
- 0 - 139 psi (0 - 9.6 bar)
- Rubber grip

PTDCLA5060288

The Clarke CSR310 sander roller can be used on any curved or flat surface and is perfect for paint removal from intricately shaped objects such as ornate staircases, spindles or decorative mouldings. This unit is also great for removing paint from pipework thanks to its capable 310W motor with 6 speed settings and 4 position spark deflecting shield.

Completing this sander is a dust extraction port for easy cleanup and a robust build for added reliability. This tool also includes:

10mm & 60mm width lamella (flapper) roll & 60mm width sanding roll

Specifications
- 230V
- Power: 310W
- 6 speed settings
- 4 position spark deflecting shield
- Dust extraction port
- Weight: 1.7kg

PTDCLA6500480

A top quality stainless steel, high temperature insulated twin wall flue pipe, guaranteed for 10 years against defects due to faulty manufacture.

This stainless steel system consists of a 25mm high density insulated core surrounded by 316 grade inner liner is 0.5mm thick, (25% thicker than some products) and the 304 grade outer casing is 0.5mm thick. They are BSRIA approved to BS4543 Parts 2 & 3 and HETAS approved for solid fuel burning. It is supplied with a bright Annealed Mirror Finish.

IMPORTANT: Your stove must have a minimum of a 1 metre vitreous flue pipe between the stove and the stainless steel twin wall system.

Specifications
To fit 6" inside diameter pipe
Keeps rain out of your flue pipe

PTDCLA6911259

PLK1074 700mm Twin Burner Gas Torch Kit. Double 60mm burner ideal for roofing on large surfaces, road line burning, industrial work, weld pre-heating and weed burning.

Specifications
- 700mm Long torch handle with flame intensity adjustment
- 5m hose
- Regulator
- Twin 600mm burners

PTDCLA3404135

The Clarke IBC7 is suitable for use with all types of 12V/24V lead acid batteries and can deliver up to 7A of charging. This unit also includes detachable ring terminals and detachable battery clamps, fitted with an inline fuse for added usage.

The IBC7 can be used as a constant DC 12V power supply and can also charge batteries up to 200Ah in size.

Specifications
- Voltage:12/24V
- Maximum charge: 7A
- Variable Charge: 3.5 & 7A
- Maximum battery size: 200Ah
- Compatible batteries: Lead Acid, Wet, Gel, MF, EFB & AGM
- Dimensions (L x W x H): 300 x 106 x 61mm

PTDCLA6267008

Ideal for any workshop, store, garage, office or home, this Clarke Boltless Shelving Unit is so quick and easy to assemble, it can be put together using only a mallet in a matter of minutes.

The CSM5350BP doesnt require nuts and bolts, instead it utilises clever slot and pin locking mechanisms that are durable, hard wearing, easy to work with and more dynamic to look at than traditional nut and bolt fixings. This type of fixing is also a lot safer than traditional fixings, as the slot and pin fixings allow for a more rounded, rolled edge finish with no sharp edges.

This particular unit boasts an impressive 350kg load capacity per shelf (evenly distributed), so its perfect for storing larger items.

Specifications
- Supplied with 5 x 6mm Fibreboard Shelves
- Adjustable shelf height
- Shelf capacity: 350kg
- Shelving unit dimensions (WxDxH): 900 x 400 x 1800mm
- Bench dimensions (WxDxH): 1800 x 400 x 900mm
- Colour: Blue
- Can be assembled as three different units - shelving, bench or corner unit
- Weight: 18.1kg

PTDCLA6600810

This Clarke 55 Piece Set is a professional quality socket set ideal for garages and workshops, manufactured from heat treated and hardened Chrome Vanadium Steel and finished in high quality chrome for corrosion resistance.

The lifetime guarantee covers defects in manufacture or materials during the lifetime of the tool, however this guarantee does not apply to the ratchet mechanism.

Specifications
- Set Contains:
- 5 x 3/8 Drive Torx Socket Bits (T40, T45, T50, T55, T60)
- 9 x 3/8 Drive Sockets (3/8, 7/16, , 9/16, 5/8, 11/16. , 13/16, 7/8)
- 10 x 3/8 Deep Drive Sockets (5/16, 3/8, 7/16, , 9/16, 5/8, 11/16, , 13/16, 7/8)
- 14 x 3/8 Drive Sockets (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm)
- 14 x 3/8 Deep Drive Sockets (6,7,8,9,10,11,12,13,14,15,16,17,18,19mm)
- 2 x 3/8 Drive Extension Bar (75, 150mm)
- 1 x Quick Release Ratchet Handle

PTDCLA1700755

The CTJ2250LP is a 2.25 tonne low profile trolley jack ideal for use with cars with low ground clearance. Featuring swivel castors for manoeuvrability, simple to operate lock/unlock valve for raising and lowering, rubber contact pad to prevent chassis damage and extra wide wheels for safe, stable use. This great value jack also comes with a dual purpose wheel handle/brace and two double ended sockets, suitable for a wide range of wheel nuts, meaning the CTJ2250LP is not only ideal for garage use, its the perfect jack for quick wheel changes in emergency situations.

Specifications
- Heavy duty steel construction
- Lifting capacity 2.25 tonnes
- Safe & simple to operate twist lock / unlock valve
- Rubber contact pad prevents damage to vehicles
- Saddle heights; min 80mm / max 380mm
- Dimensions (LWH) 560x225x150mm
- Weight: 13.7kg
- Supplied with two double ended sockets 17/19mm & 21/23mm and useful dual purpose handle/wheel brace

PTDCLA7623070

The Clarke 10 inch duct is designed to be used with the CAM250B Clarke ventilator and benefits from a lightweight PVC design to safely remove harmful fumes from a garage or workshop setting.

Product shown attached to the Clarke ventilator sold seperately.

Specifications
- For use with Clarke ventilator CAM250B
- 5m x 250mm Dia.

PTDCLA3230453

The Clarke LED work light utilises bright LEDs to produce an extremely bright floodlight to lit darkened work areas. The external rating makes this light suitable for both external and internal site and also domestic use and its durable build makes this a reliable and versatile piece of equipment.

Specifications
- 110V
- 400 Watts
- Lumen: 8,545 x 2 lights (17,090m total max.)
- IP54 rating for added durability
- Sold with energy class C bulb
- Strong metal floor stands
- 1.5m cable

PTDCLA5460690

This magnifying lamp with circular fluorescent tube illumination has long reach sprung arms for effortless head positioning. Perfect for home use or industrial inspection environments, objects are magnified by a clear 127mm diameter 1.75x magnification lens.

Specifications
- 3 Dioptre, 1.75x lens
- 180 vertical and horizontal head rotation
- Long reach 500mm upper and lower head positioning arms with strong desk mounting clamp
- Protective lens cover
- High efficiency 400 lumen fluorescent lamp
- Brightness 5000lux at 15cm
- 6000hr tube life expectancy
- Supply 230V AC 50Hz
- 22W T9 circular fluorescent tube
- Input current 100mA

PTDCLA5460532

The Clarke IBC15 is suitable for use with all types of 12V lead acid batteries and can deliver up to 15A of charging. This unit benefits from a boost feature (12V 15A) for faster charging and the IBC15 also has a 12V socket for conveniently charging other devices.

With LED colour indicators, reverse polarity and overcharge protection, this is a capable, compact and lightweight charging solution.

Specifications
- Voltage:12V
- Maximum charge: 15A
- Variable Charge: 2,6,10 & 15A
- Maximum battery size: 400Ah
- Compatible batteries: Lead Acid, Wet, Gel, MF, EFB & AGM
- Dimensions (L x W x H): 147 x 218 x 212mm
- Charge Indicator

PTDCLA6267010

This compact 2.25 tonne trolley jack is perfect for the home mechanic. Its steel chassis and castors provide durability while the quick lift facility provides ease of use. Supplied in a tough blow moulded case for convenient storage and portability.

Specifications
- Strong steel chassis
- Simple twist release valve
- Quick lift for first 5 strokes
- Lifting Capacity: 2.25 Tonnes
- Saddle height: Min 135 mm. Max 387 mm
- Dimensions (L x W x H): 550 x 205 x 140 mm
- Weight: 12.6 kg

PTDCLA7623073

230V Twin halogen work lights with tripod

Very bright 2x 8545 lumen floodlights with 400W halogen bulbs. Suitable for domestic or trade use.

Specifications
- For internal or light external use
- 230V supply
- Two 400W Halogen bulbs included (R7s-J118)
- Strong metal construction with floor stand and tripod with height adjustment up to 1870mm
- Sold with energy class C bulb
- Cable Length: 1.5m
- IP Rating: IP54

PTDCLA5460695