Mitre Saws

The Metabo KGS 254 Plus 254mm double bevel mitre saw with superb dust extraction capability thanks to a dual port design mounted close to the work piece. It has a soft start powerful universal motor, Vario-Constamatic (VC) full-wave electronics for infinitely variable speed change and under load the speed remains almost constant.

It has the Metabo Quick saw blade change without key, integrated cutting depth control and lateral handles. The sliding function allows for wide work pieces, ideal for simple cutting of all angular, bevel and rafter cuts, sawing wood, coated panels and plastics and is also suitable for sawing non-ferrous metals.

Comes with: 1 x Carbide Circular Saw Blade (alternately bevel-ground tooth, 60 teeth), 2 x Table Length Extensions, 1 x High Guide Profiles (that can be moved at the sides), 1 x Workpiece Clamp and 1 x Chip Extraction Connections Laser.

Specification

Input Power: 2,000W
No Load Speed: 3,900-5,150/min
Blade: 254 x 30mm Bore
Capacity (mm): 90/90: 305 x 90, 90/45: 305 x 90, 45/90: 214 x 90, 45/45: 214 x 54
Mitre: 47/60
Weight: 24kg

PTDGRPMPTKGS254P

The Metabo KGS 216 MN Sliding Mitre Saw has a die-cast aluminium work bench and a sliding function for wide work pieces. It is ideal for sawing wood, coated panels and plastics. It has a freely adjustable table extension on both sides with a practical support surface and integrated crosscut fence.

Its non-slip rubber surface on its handle and upper carry handle ensures excellent grip, and the saw also has lateral handles. For working in poorly lit areas, the mitre saw has an integrated working light. For accurate cutting, the saw has a laser for exact display of the cut, and all scales are visible from the working position. In addition the turntable allows precise angle adjustment, and it has integrated cutting depth control.

To ensure safety, the Metabo KGS 216 MN Sliding Mitre Saw has a transport lock and a cable winder. The saw is also supplied with a chip collection bag to ensure clean air at the work place. The saw blade is easy to change, and the machine is supplied with a tool for this.

Specification

Input Power: 1,500W
No Load Speed: 3,750/min.
Blade: 216 x 30mm Bore
Saw Blade Tilt Left/Right: 47/2
Capacity: Straight Cut 90/90: 305x65mm
Double Mitre 45/45: 205x36mm
Weight: 13.5kg

Metabo KGS-216MN 216mm Sliding Mitre Saw 1500W 110V Version.

PTDMPTKGS216MNL

The Metabo KGS 216 MN Sliding Mitre Saw has a die-cast aluminium work bench and a sliding function for wide work pieces. It is ideal for sawing wood, coated panels and plastics. It has a freely adjustable table extension on both sides with a practical support surface and integrated crosscut fence.

Its non-slip rubber surface on its handle and upper carry handle ensures excellent grip, and the saw also has lateral handles. For working in poorly lit areas, the mitre saw has an integrated working light. For accurate cutting, the saw has a laser for exact display of the cut, and all scales are visible from the working position. In addition the turntable allows precise angle adjustment, and it has integrated cutting depth control.

To ensure safety, the Metabo KGS 216 MN Sliding Mitre Saw has a transport lock and a cable winder. The saw is also supplied with a chip collection bag to ensure clean air at the work place. The saw blade is easy to change, and the machine is supplied with a tool for this.

Specification

Input Power: 1,500W
No Load Speed: 3,750/min.
Blade: 216 x 30mm Bore
Saw Blade Tilt Left/Right: 47/2
Capacity: Straight Cut 90/90: 305x65mm
Double Mitre 45/45: 205x36mm
Weight: 13.5kg

PTDGRPMPTKGS216MN

The Makita LS0714 190mm Sliding Compound Mitre Saw has been developed to improve cost-effectiveness by removing electronic circuit for soft start & constant speed from model LS0713.

The primary use is for making/modifying interior decorations in apartment building. It has a compact and lightweight design making it convenient to carry to workplace. It has a maximum cutting depth of 2in. The tool is double insulated and it is fitted with an electronic brake for increased user safety.

It is supplied with a vertical vice, dust bag, socket wrench, holder, triangular rule, 2 x lock-off buttons, TCT blade and a kerf block.

L models are fitted with a built-in laser.

Specification

Input Power: 1,010W
No Load Speed: 6,000/min.
Blade: 190 x 20mm Bore
Mitre Range: 57-47
Mitre Cut: at 90 52 x 300mm, at 45 52 x 212mm
Weight: 12.6kg

Makita LS0714L 190mm Sliding Compound Mitre Saw & Laser 1010 Watt 240 Volt Version.

PTDMAKLS0714L

The Makita LS0714 190mm Sliding Compound Mitre Saw has been developed to improve cost-effectiveness by removing electronic circuit for soft start & constant speed from model LS0713.

The primary use is for making/modifying interior decorations in apartment building. It has a compact and lightweight design making it convenient to carry to workplace. It has a maximum cutting depth of 2in. The tool is double insulated and it is fitted with an electronic brake for increased user safety.

It is supplied with a vertical vice, dust bag, socket wrench, holder, triangular rule, 2 x lock-off buttons, TCT blade and a kerf block.

L models are fitted with a built-in laser.

Specification

Input Power: 1,010W
No Load Speed: 6,000/min.
Blade: 190 x 20mm Bore
Mitre Range: 57-47
Mitre Cut: at 90 52 x 300mm, at 45 52 x 212mm
Weight: 12.6kg

Makita LS0714L 190mm Sliding Compound Mitre Saw & Laser 1010 Watt 110 Volt Version.

PTDMAKLS0714LL

The Makita LS0714 190mm Sliding Compound Mitre Saw has been developed to improve cost-effectiveness by removing electronic circuit for soft start & constant speed from model LS0713.

The primary use is for making/modifying interior decorations in apartment building. It has a compact and lightweight design making it convenient to carry to workplace. It has a maximum cutting depth of 2in. The tool is double insulated and it is fitted with an electronic brake for increased user safety.

It is supplied with a vertical vice, dust bag, socket wrench, holder, triangular rule, 2 x lock-off buttons, TCT blade and a kerf block.

L models are fitted with a built-in laser.

Specification

Input Power: 1,010W
No Load Speed: 6,000/min.
Blade: 190 x 20mm Bore
Mitre Range: 57-47
Mitre Cut: at 90 52 x 300mm, at 45 52 x 212mm
Weight: 12.6kg

Makita LS0714 190mm Sliding Compound Mitre Saw 1010 Watt 110 Volt Version.

PTDMAKLS0714N11

The Makita LS1018L 260mm Sliding Compound Mitre Saw has double sliding rails with linear ball bearings on each rail ensures a perfectly smooth and accurate cut. It has been designed for craftsmen and professional joinery shops but tough enough for site use. The angled motor housing ensures clearance for the thicker work-pieces whilst the electronic power control maintains constant blade speed under load. It has a adjustable sub-fence and a trench cutting facility.

Supplied with: 1 x Vertical Vice, 1 x Dust Bag, 1 x Socket Wrench, 1 x Holder, 1 x Triangular Rule, 2 x Lock-Off Buttons, 1 x TCT Blade and 1 x Kerf Block.

Specification:

Input Power: 1,430W
No Load Speed: 4,300/min.
Blade: 260 x 30mm Bore
Mitre Range: 60-47
Bevel Range: 45-45
Mitre Cut: at 45 91 x 220mm, at 90 91 x 310mm
Weight: 20.7kg

Makita LS1018L 260mm Sliding Compound Mitre Saw 1430 Watt 240 Volt Version.

PTDMAKLS1018L

The Makita LS1040 Mitre Saw provides stable cutting by holding material more widely with sub fence and pivoting fence provides efficient stock support. It has a highly durable body design and provides an extremely accurate cut and bevel cut (left only). It also has an efficient chip/sawdust collection system.

Supplied with: 1 x Vertical Vice, 1 x Dust Bag, 1 x Holder, 1 x Triangular Rule.

Specification

Input Power: 1,650 Watt.
No Load Spped: 4,600/min.
Blade: 260 x 30mm Bore.
Bevel Range: 45-90.
Mitre Range: 45-90.
Mitre Cut: at 45 : 48 x 95mm, at 90: 90.5 x 95mm.
Weight: 12.4kg.

Makita LS1040 260mm Mitre Saw 1650 Watt 110 Volt Version.

PTDMAKLS1040L

The Bosch GCM800SJ Sliding Mitre has a powerful motor with an optimised speed of 5,500 rpm, that is ideally suited to cutting timber. Its low weight design and the optimised transportation handle make it the ideal on site partner.

Complete with a 24 tooth blade and a horizontal cutting capacity of 270mm, it is ideally suited for flooring, angle cuts for skirting boards as well as the cutting of wooden studs for partitioning. The vertical handle has an intuitive lower guard lock out button, optimised for right and left handed operation and it has mitre detents, for the most frequently used angles.

Comes with a 24 Tooth Saw Blade.

Specification

Input Power: 1,400W
No Load Speed: 5,500/min.
Capacity: 0/0: 70 x 270mm, 0/45: 70 x 180mm, 45/0: 45 x 270mm, 45/45: 45 x 180mm.
Mitre Setting Left/Right: 47/47
Bevel Setting Left/Right: 45/0
Mitre Detent Stops Left/Right: 45/22.5/15/0/15/22.5/45
Bevel Detent Stops: 45/0
Weight: 13.5kg

PTDGRPBSHGCM800SJ

The Makita LS0714 190mm Sliding Compound Mitre Saw has been developed to improve cost-effectiveness by removing electronic circuit for soft start & constant speed from model LS0713.

The primary use is for making/modifying interior decorations in apartment building. It has a compact and lightweight design making it convenient to carry to workplace. It has a maximum cutting depth of 2in. The tool is double insulated and it is fitted with an electronic brake for increased user safety.

It is supplied with a vertical vice, dust bag, socket wrench, holder, triangular rule, 2 x lock-off buttons, TCT blade and a kerf block.

L models are fitted with a built-in laser.

Specification

Input Power: 1,010W
No Load Speed: 6,000/min.
Blade: 190 x 20mm Bore
Mitre Range: 57-47
Mitre Cut: at 90 52 x 300mm, at 45 52 x 212mm
Weight: 12.6kg

PTDGRPMAKLS0714

The Makita LS1018L 260mm Sliding Compound Mitre Saw has double sliding rails with linear ball bearings on each rail ensures a perfectly smooth and accurate cut. It has been designed for craftsmen and professional joinery shops but tough enough for site use. The angled motor housing ensures clearance for the thicker work-pieces whilst the electronic power control maintains constant blade speed under load. It has a adjustable sub-fence and a trench cutting facility.

Supplied with: 1 x Vertical Vice, 1 x Dust Bag, 1 x Socket Wrench, 1 x Holder, 1 x Triangular Rule, 2 x Lock-Off Buttons, 1 x TCT Blade and 1 x Kerf Block.

Specification:

Input Power: 1,430W
No Load Speed: 4,300/min.
Blade: 260 x 30mm Bore
Mitre Range: 60-47
Bevel Range: 45-45
Mitre Cut: at 45 91 x 220mm, at 90 91 x 310mm
Weight: 20.7kg

PTDGRPMAKLS1018L

The Makita LS1040 Mitre Saw provides stable cutting by holding material more widely with sub fence and pivoting fence provides efficient stock support. It has a highly durable body design and provides an extremely accurate cut and bevel cut (left only). It also has an efficient chip/sawdust collection system.

Supplied with: 1 x Vertical Vice, 1 x Dust Bag, 1 x Holder, 1 x Triangular Rule.

Specification

Input Power: 1,650 Watt.
No Load Spped: 4,600/min.
Blade: 260 x 30mm Bore.
Bevel Range: 45-90.
Mitre Range: 45-90.
Mitre Cut: at 45 : 48 x 95mm, at 90: 90.5 x 95mm.
Weight: 12.4kg.

PTDGRPMAKLS1040

The Makita MLS100 255mm Mitre Saw has a compact and robust construction for more accurate cuts. It has a built-in dust collection system for a dust free working environment. The tool has double insulation and an electric brake for added safety.

It is supplied with a blade, dust bag, holders vertical vice, triangular rule and a spanner.

Specification

Input Power: 1,500W
No Load Speed: 4,200/min.
Blade: 255 x 30mm Bore
Mitre Range: 45-45
Mitre Cut: at 90: 75mm, at 45: 48mm
Bevel Range: 45-0
Weight: 14.7kg

All vibration figures quoted are Tri-axial to EN60745 2006.

Vibration K Factor: 1.5 m/sec.
Vibration No Load: 2.5 m/sec.

PTDGRPMAKMLS100

The Metabo KGS 305M Cross Cut Mitre Saw has a compact, light weight design with a one-handed transport design feature. Offers enormous cutting performance due to the extremely powerful universal motor and large saw blade. With a sliding function for wide work pieces. Easy saw blade change by means of a spindle lock: No dismantling of the pendulum protective cover required.

Easily transported thanks to the ergonomically-designed handles and saw head lock. It has a robust die-cast aluminium design for the highest demands and offers effective dust extraction via an integrated dust scoop. Starting current limitation prevents the actuation of the lock on start-up.

The saw offers fast and precise setting of common angles using stop points with a laser for exact display of the cutting line (mains powered, no batteries required). Infinitely extendable table width extension, removable to put long panels, slabs etc. Underneath. The bright LED work light provides illumination of the cutting line (mains powered, no batteries required).

For safe sawing it has high sliding rear fence profiles and a material clamp for secure fixing of the work piece from the top or front. The saw head can be inclined to the left, with additional angle range for undercuts. All scales and operating elements are visible from the working position and can be operated intuitively.

Specification

Input Power: 1600W
No Load Speed: 3700/min.
Blade: 305 x 30mm Bore
Turntable Setting Left/Right: 47/47.
Max. Cutting (mm): Width 90/45: 305/205, Depth 90/45: 105/67, 90/90: 305x105
Double Mitre: 45/45: 205x67mm
Blade Tilt Left/Right: 47/2
Weight: 19.6kg

PTDGRPMPTKGS305M

The DEWALT DWS774 216mm XPS Slide Mitre Saw has a classic saw design that has been updated for the modern user. With a head lock function that allows the head to be fixed, restricting the traverse function for trim applications and ease of transportation. Integrated positive mitre stops at 15, 22.5, 30, 45 and quick release mitre mechanism up to 50.

The XPS shadow line cut indicator provides fast accurate alignment of the blade while illuminating the work piece for increased productivity no adjustment required. The base and fence have been machined to meet the accuracy requirements of the most demanding applications. With fixed left and right hand fences with measuring scale for improved material support and management.

It has a compact internal rail design for huge cutting capacity in a highly transportable format and carry side handles for easy transportation.

Supplied with: 1 x 216mm TCT Blade, 1 x Blade Spanner and 1 x Material Clamp.

Specification

Input Power: 1,400W
No Load Speed: 4,500/min.
Blade: 216 x 30mm Bore
Capacity (mm): 90/90: 250x62, 90/45: 265x48, 45/90: 177x62, 45/45: 190x48
Max. Cutting Depth: 70mm
Mitre Capacity (Right/Left): 48/48
Bevel Capacity: 48
Weight: 12kg

DEWALT DWS774 216mm XPS Slide Mitre Saw 110 Volt Version

PTDDEWDWS774L