Plunge Saws

The Makita SP6000J Plunge Saw features a depth stopper for splinter-free cutting. It has a tip-resistant design and comes complete with a MAKPAC connector case. Fitted with a soft start feature and electronic speed control for constant speed under load.

Specification

Input Power: 1,300W
No Load Speed: 2,000-5,200/min.
Blade: 165 x 20mm bore
Depth of Cut: at 90 55mm, at 45 39mm
Weight: 4.2kg

All vibration figures quoted are Tri-axial to EN60745 2006.

Noise Sound Pressure: 91 dB(A)
Noise Sound Power: 102 dB(A)
Noise K Factor: 3 dB(A)
Vibration K Factor: 1.5 m/sec
Vibration: Cutting Chipboard: 2.5 m/sec

PTDGRPMAKSP6000J1

The DEWALT DWS520KT Heavy-Duty Plunge Saw has full wave electronics that maintain a constant speed under heavy load and the variable speed allows you to select the correct speed depending on the material you are cutting. The anti kickback function stops the saw from moving backwards along the rails and helps stop the saw from climbing out of the work piece when making plunge cuts.

The parallel plunge allows the user to maintain a smooth and constant hand position while cutting and the included 48 tooth blade gives a fine and accurate finish with very little breakout in laminates. The rail adjustment allows the saw to be adjusted accurately to the rails (not included) and it has a 55mm depth of cut that allows the trimming and sizing of most common door sizes. The enclosed guard gives a 90% dust extraction capability.

Supplied with: 1 x 48 Tooth Precision Circular Saw Blade, 1 x Airlock Adaptor and 1 x TSTAK Kit Box.

Specification

Input Power: 1,300W
No Load Speed: 1,750-4,000/min.
Depth of Cut: at 90: 59mm, at 45: 44mm
Depth of Cut with Guide Rails: at 90: 55mm, at 45: 40mm
Blade: 165x20mm Bore
Bevel Capacity: 47
Weight: 5.1kg

PTDGRPDEWDWS520KT

The DEWALT DWS520KT Heavy-Duty Plunge Saw has full wave electronics that maintain a constant speed under heavy load and the variable speed allows you to select the correct speed depending on the material you are cutting. The anti kickback function stops the saw from moving backwards along the rails and helps stop the saw from climbing out of the work piece when making plunge cuts.

The parallel plunge allows the user to maintain a smooth and constant hand position while cutting and the included 48 tooth blade gives a fine and accurate finish with very little breakout in laminates. The rail adjustment allows the saw to be adjusted accurately to the rails (not included) and it has a 55mm depth of cut that allows the trimming and sizing of most common door sizes. The enclosed guard gives a 90% dust extraction capability.

Supplied with: 1 x 48 Tooth Precision Circular Saw Blade, 1 x Airlock Adaptor and 1 x TSTAK Kit Box.

Specification

Input Power: 1,300W
No Load Speed: 1,750-4,000/min.
Depth of Cut: at 90: 59mm, at 45: 44mm
Depth of Cut with Guide Rails: at 90: 55mm, at 45: 40mm
Blade: 165x20mm Bore
Bevel Capacity: 47
Weight: 5.1kg

The DEWALT DWS520KTL Heavy-Duty Plunge Saw 1300W 110 Volt Version.

PTDDEWDWS520KTL

The Batavia T-Raxx Pro Plunge Saw has a range of electronics that help maintain a constant speed, even under heavy load. The variable speed allows you to select the correct speed depending on the material you are cutting. It features track adjustment with a guide rail lock and scribing function (2.0mm). The anti kickback and soft start function prevent the saw from moving backwards along the rails and stop the saw from climbing out of the work piece when making plunge cuts.

It is also compatible with Festool and Makita tracks.

Specification

Input Power: 1,400W
No Load Speed: 2,000-5,300/min.
Blade: 165 x 20mm Bore
Bevel Capacity: 0-48
Depth of Cut: at 90: 54mm, at 45: 42mm
Depth of Cut With Track: at 90: 51mm, at 45: 38mm

PTDBAT7062176

The Batavia Maxx Saw offers precise cutting in wood, tiles, plastic and laminate. With an adjustable sawing depth of 0 to 26mm. It is fitted with an integrated laser to enable straight line cuts. It has an ergonomic, lightweight design that enables single handed use and remains comfortable, even after long periods of use. It also features a quick and easy blade change system.

Supplied with: 1 x 85mm TCT Saw Blade, 1 x 85mm HSS Saw Blade, 1 x 85mm Diamond Blade, 1 x Hex Key, 1 x Dust Extraction Adaptor and 1 x Case.

Specification

Input Power: 600 Watt.
No Load Speed: 4,000/min.
Cutting Depth: 0-26mm.
Blade: 85 x 10mm Bore.
Saw Blade Thickness: 1.4mm.
Weight: 1.86kg.

PTDBAT7062244

Batavia T-RAXX Track Connectors for joining plunge/track saw tracks to extend overall track length. Helps create longer track lengths when cutting boards, work tops, etc. Compatible with most brands of track.

PTDBAT7061281

The Batavia T-RAXX Compact Plunge Compact Saw for cutting in wood, non-ferrous metal, plastic, laminate, tiles, granite and marble. It has an adjustable cutting depth and easy blade change for fast working conditions. Supplied with a dust extraction adaptor for dust-free working.

Supplied with: 1 x 110mm TCT Saw Blade 40T, 1 x 110mm Diamond Blade, 3 33cm Track Pieces (Total Length: 99cm), 2 Clamps, 2 Track Connectors, 1 x Hex Key and 1 x Dust Extraction Adaptor.

Specification:

Input Power: 1050W
No Load Speed: 12,000/min.
Max. Cutting Depth with/without Track: 24/28mm
Saw Blade: 110 x 22.2mm Bore
Weight: 3kg

PTDBAT7063378

The Batavia T-RAXX Working Clamps are used to secure the track on the work piece. They have a one handed trigger operation and feature a quick release lever.

Please note each clamp needs 25mm (1in) of track length.

Supplied as a twin pack.

PTDBAT7061282

The DEWALT DWS520KT Heavy-Duty Plunge Saw has full wave electronics that maintain a constant speed under heavy load and the variable speed allows you to select the correct speed depending on the material you are cutting. The anti kickback function stops the saw from moving backwards along the rails and helps stop the saw from climbing out of the work piece when making plunge cuts.

The parallel plunge allows the user to maintain a smooth and constant hand position while cutting and the included 48 tooth blade gives a fine and accurate finish with very little breakout in laminates. The rail adjustment allows the saw to be adjusted accurately to the rails (not included) and it has a 55mm depth of cut that allows the trimming and sizing of most common door sizes. The enclosed guard gives a 90% dust extraction capability.

Supplied with: 1 x 48 Tooth Precision Circular Saw Blade, 1 x Airlock Adaptor and 1 x TSTAK Kit Box.

Specification

Input Power: 1,300W
No Load Speed: 1,750-4,000/min.
Depth of Cut: at 90: 59mm, at 45: 44mm
Depth of Cut with Guide Rails: at 90: 55mm, at 45: 40mm
Blade: 165x20mm Bore
Bevel Capacity: 47
Weight: 5.1kg

The DEWALT DWS520KT Heavy-Duty Plunge Saw 1300W 240 Volt Version.

PTDDEWDWS520KT

The Makita SP6000J Plunge Saw features a depth stopper for splinter-free cutting. It has a tip-resistant design and comes complete with a MAKPAC connector case. Fitted with a soft start feature and electronic speed control for constant speed under load.

Specification

Input Power: 1,300W
No Load Speed: 2,000-5,200/min.
Blade: 165 x 20mm bore
Depth of Cut: at 90 55mm, at 45 39mm
Weight: 4.2kg

All vibration figures quoted are Tri-axial to EN60745 2006.

Noise Sound Pressure: 91 dB(A)
Noise Sound Power: 102 dB(A)
Noise K Factor: 3 dB(A)
Vibration K Factor: 1.5 m/sec
Vibration: Cutting Chipboard: 2.5 m/sec

Makita SP6000J Plunge Saw 165mm 1300 Watt 240 Volt Version.

PTDMAKSP6000J1

The Makita SP6000J Plunge Saw features a depth stopper for splinter-free cutting. It has a tip-resistant design and comes complete with a MAKPAC connector case. Fitted with a soft start feature and electronic speed control for constant speed under load.

Specification

Input Power: 1,300W
No Load Speed: 2,000-5,200/min.
Blade: 165 x 20mm bore
Depth of Cut: at 90 55mm, at 45 39mm
Weight: 4.2kg

All vibration figures quoted are Tri-axial to EN60745 2006.

Noise Sound Pressure: 91 dB(A)
Noise Sound Power: 102 dB(A)
Noise K Factor: 3 dB(A)
Vibration K Factor: 1.5 m/sec
Vibration: Cutting Chipboard: 2.5 m/sec

Makita SP6000J Plunge Saw 165mm 1300 Watt 110 Volt Version

PTDMAKSP6000J1L

The Makita DSP600/1 Brushless LXT Plunge Saw is powered by 2 x 18V Li-ion batteries in series (not supplied), to supply energy to the powerful 36V DC motor drive system. It has an efficient brushless motor with a soft start feature and an electronic brake for added user safety.

Automatic Torque Drive Technology automatically changes the cutting speed according to load condition for optimum operation. Other features include a variable speed control dial, depth stopper for splinter free cutting and positive stop for bevel adjustment.

DSP601ZJU has Auto-Start Wireless System (AWS), which connects to compatible dust extractors with Bluetooth. The dust extractor automatically runs while the switch is on.

DSP601ZJU: Bare Unit, No Battery or Charger with Auto-Start Wireless Unit
DSP600ZJ: Bare Unit, No Battery or Charger

Specification:

No Load Speed: 2,500-6,300/min.
Blade Diameter: 165mm
Bore: 20mm
Max. Bevel: 48
Max. Cut: at 0 56mm, at 45 40mm
Weight: 4.4kg

The Makita DSP600ZJ Brushless LXT Plunge Saw is supplied as a bare unit, no battery or charger supplied.

PTDMAKDSP600ZJ

The Makita DSP600/1 Brushless LXT Plunge Saw is powered by 2 x 18V Li-ion batteries in series (not supplied), to supply energy to the powerful 36V DC motor drive system. It has an efficient brushless motor with a soft start feature and an electronic brake for added user safety.

Automatic Torque Drive Technology automatically changes the cutting speed according to load condition for optimum operation. Other features include a variable speed control dial, depth stopper for splinter free cutting and positive stop for bevel adjustment.

DSP601ZJU has Auto-Start Wireless System (AWS), which connects to compatible dust extractors with Bluetooth. The dust extractor automatically runs while the switch is on.

DSP601ZJU: Bare Unit, No Battery or Charger with Auto-Start Wireless Unit
DSP600ZJ: Bare Unit, No Battery or Charger

Specification:

No Load Speed: 2,500-6,300/min.
Blade Diameter: 165mm
Bore: 20mm
Max. Bevel: 48
Max. Cut: at 0 56mm, at 45 40mm
Weight: 4.4kg

The Makita DSP601ZJU Brushless LXT Plunge Saw comes with the Auto-Start Wireless Unit. The wireless unit connects to compatible dust extractors via Bluetooth. The dust extractor then automatically runs while the switch is on and off when the machine is switched off.

NO battery or charger supplied.

PTDMAKDSP601ZJU

The Makita DSP600/1 Brushless LXT Plunge Saw is powered by 2 x 18V Li-ion batteries in series (not supplied), to supply energy to the powerful 36V DC motor drive system. It has an efficient brushless motor with a soft start feature and an electronic brake for added user safety.

Automatic Torque Drive Technology automatically changes the cutting speed according to load condition for optimum operation. Other features include a variable speed control dial, depth stopper for splinter free cutting and positive stop for bevel adjustment.

DSP601ZJU has Auto-Start Wireless System (AWS), which connects to compatible dust extractors with Bluetooth. The dust extractor automatically runs while the switch is on.

DSP601ZJU: Bare Unit, No Battery or Charger with Auto-Start Wireless Unit
DSP600ZJ: Bare Unit, No Battery or Charger

Specification:

No Load Speed: 2,500-6,300/min.
Blade Diameter: 165mm
Bore: 20mm
Max. Bevel: 48
Max. Cut: at 0 56mm, at 45 40mm
Weight: 4.4kg

PTDGRPMAKDSP601ZJU

The Batavia Precision Plunge Saw features a digital display for speed control as well as a pivotal guard for a faster saw blade change. It comes with a dust extraction adaptor for dust-free working. Ideal for cutting a wide variety of materials: parquet/laminate, linoleum, plastic, tiles, non-ferrous metals and much more.

Supplied with: 1 x 50mm TCT Saw Blade 18T, 1 x 50mm HSS Saw Blade 60T, 1 x 50mm Diamond Blade, 1 x Hex Key, 1 x Dust Extraction Tube & Adaptor, 1 x Pipe Cutting Guard, 1 x Parallel Guide and 1 x Nylon Bag.

Specification:

Input Power: 500W
No Load Speed: 4,000-8,200/min.
Max. Cutting Depth: 12mm
Saw Blade: 50 x 11mm Bore
Blade Thickness: TCT 1.9mm, HSS 1.15mm, Diamond 1.75mm
Weight: 1.65kg

PTDBAT7063375