Sanders & Polishers

The Clarke CBB150 is ideal for buffing and polishing metal and composite surfaces to a bright lustred finish. This unit features a robust cast iron base with rubber feet which reduces vibration, and this model can also be bolted to a work bench to make it even easier to use.

With its built in motor delivering 250W of power and 2850rpm combined with its bearing balanced precision machined shafts, this buffer offers excellent performance. For added safety, a front mounted on/off switch makes the polisher easy to switch off, and easy fitment and removal of polishing mops makes for efficient working.

Completing this handy machine is a reliable build and 2x polishing mops included (1x stitched 1x open style) to get started.

Specification
- 230V
- Motor: 250W
- Diameter: 150mm
- Width: 8mm
- Bore: 12.7mm
- Speed: 2850 rpm
- Weight: 8.9kg

PTDCLA6500485

The NEW SXE 450 TurboTec boasts many new features over its predecessor. It has more power, but at the same time is more compact and 500 grams lighter. It also comes with an Intec dust filter unit to help aid dust containment, plus a new TurboBoost switch for maximum stock removal. The new TurboBoost switch also boosts performance. Improved ergonomics and styling for greater working comfort. Improved gearing and bearing system reduces vibration by 25% for greater working comfort and safety.

The orbit diameter range has increased from 3 - 6mm to 2.8 - 6.2mm giving a finer finish (2.8mm) and higher stock removal (6.2mm) capability allowing the machine to work harder so you dont have to. Improved dust retention system through use of the Metabo Intec filter cartridge.

Specification:

Input Power: 350W
Oscillating Speed: 0-13,100/min.
Oscillating Diameter: 2.8 or 6.2mm
Base Plate: 150mm
Weight: 2.2kg

This Metabo PRO PACK contains:

1 x SXE 450 TurboTec Sander
1 x Intec Dust Collection Cartridge
1 x 25 Pack of Mixed Sanding Discs
1 x Lambswool Bonnet
1 x Polishing Sponge
1 x Metabox III

PTDMPTSXE450PP

The Meatbo FSX 200 Intec palm disc sander is a small, lightweight machine which is perfect for one-handed use with a hook and loop-faced backing pad. It has a very good power to weight ratio making it perfect for getting the job done quickly and professionally in those tight, awkward places. This multi-purpose machine is ideal for sanding and polishing even and cambered surfaces, wood, plastics, non-ferrous metals, sheet steel.

Includes: a Intec dust filter unit to help aid dust containment and a carry case .

Specification

Input Power: 240W
Oscillating Speed: 11,000/min.
Oscillating Diameter: 2.7mm
Base Plate: 125mm
Weight: 1.3kg

PTDMPTFSX200

The Metabo LF 724 paint stripper / remover is ideal for the environmentally-friendly removal of paint and varnish from even wooden surfaces, such as stairs,
doors and windows.It is also suitable for processing untreated wood and for working on a roof truss for edges and corners difficult to reach.

It offers up to 70 % time saving compared to conventional working methods and is ideal for cutting grooves and trimming edges. It has a variably adjustable chip removal setting with a sheathed, sturdy die cast aluminum gear housing and palloid toothed high performance gear. The universal motor has a high capacity reserve and is equipped with the Metabo S-automatic torque limiting clutch.

Supplied with: 4 Reversible Carbide Blades, 1 x Extraction Connector, 1 x Adjusting Wrench, 1 x Combo-Spanner and 1 x Plastic Carry Case.

Specification

Input Power: 710W
No Load Speed: 10,000/min.
Cutting Edge Cycle: 80mm
Radial Routing Depth: 0.15mm
Weight: 2.6kg

PTDMPTLF724

The Metabo FSR-200 Intec Orbital Palm Sander is a lightweight, handy machine for convenient one-handed operation with a good weight to performance ratio, making it ideal for working overhead. It has dust-proof ball bearings for increased machine service life.

The grip area is coated with a non-slip soft-grip surface for increased user comfort and safety. Its robust clamping system allows for attaching sand paper with or without Hook & Loop. The Intec Dust cartridge with filter allows you to work without connecting to a vacuum cleaner. Extraction possibility by means of connecting to an all-purpose vacuum cleaner via an adapter (NOT supplied)

Supplied with: 1 x Hole Punch, 1 x Intec Dust Collection Cartridge, 1 x Pleated Filter and 1 x Plastic Carry Case.

Specification

Input Power: 200W
Oscillating Speed: 26,000/min.
Oscillating Diameter: 1.4mm
Base Plate: 102 x 114mm
Cable Length: 2.8m
Weight: 1.25kg

PTDMPTFSR200

The Flex VarioPlus Giraffe wall and ceiling sander is ideally suited for sanding plaster boards, solid Styropor insulation slabs, preparation for painting and polishing. It has electronic control which gives controlled constant speed, soft-start, overload protection and speed selection with an adjuster wheel. Using a unique telescopic system, the Vario-Giraffe adapts to your needs with the length being adjustable from 1330mm to 1730mm. The handle rotates through 360 .

The ergonomic design offers many different handling possibilities for fatigue-free working. The motor is always kept between the gripping positions, ensuring a perfect balance. The articulating sanding head can be adjusted to every tilt and angle.

The sander is fitted with interchangeable heads that are attached and removed with a click, including a triangular sander head. This is optimally suited to sanding corners and edges with the random orbital movement of the sanding head taking the abrasive right up to the edges with the backing pad.

The VarioPlus Giraffe has effective dust extraction from between the brush ring and the sanding pad (round), and through the 10-hole extraction ports it prevents premature clogging of the abrasive and promotes a healthy, dust-free working environment. The brush ring is spring-mounted so that the round sanding head accurately follows all uneven contours. This allows the head to be applied with fingertip precision and also prevents any dust escaping

Supplied with: Round and Triangular Sanding Heads, Hook & Loop Backed Sanding Paper, Hook & Loop Abrasive Paper, 32mm x 4m Vacuum Hose and a Padded Carry Case.

Specification

Input Power: 710W
Oscillating Speed: 1,000-1,500/min.
Corner Sander Oscillating Speed: 3,000-4,500/min.
Length: 1,330-1,730mm
Weight: 4.8kg

The Flex Power Tools WST 700VVP Vario Plus Giraffe Wall & Ceiling Sander 710W 240 Volt Version.

PTDFLXWST700VP

The NEW SXE 450 TurboTec boasts many new features over its predecessor. It has more power, but at the same time is more compact and 500 grams lighter. It also comes with an Intec dust filter unit to help aid dust containment, plus a new TurboBoost switch for maximum stock removal. The new TurboBoost switch also boosts performance. Improved ergonomics and styling for greater working comfort. Improved gearing and bearing system reduces vibration by 25% for greater working comfort and safety.

The orbit diameter range has increased from 3 - 6mm to 2.8 - 6.2mm giving a finer finish (2.8mm) and higher stock removal (6.2mm) capability allowing the machine to work harder so you dont have to. Improved dust retention system through use of the Metabo Intec filter cartridge.

Specification:

Input Power: 350W
Oscillating Speed: 0-13,100/min.
Oscillating Diameter: 2.8 or 6.2mm
Base Plate: 150mm
Weight: 2.2kg

1 x Metabo SXE-450 Variable Speed Orbital Sander 150mm 350W 110V

Supplied with: 1 x Hook & Loop Sanding Pad, 1 x Hexagonal Wrench, 1 x Removable Side Handle and 1 x Textile Dust Bag.

PTDMPTSXE450L

Metabo 200 Watt FMS-200 Intec Palm Tri Sander is a small lightweight machine perfect for one-handed use. It has the Intec dust filter unit to help aid dust containment. It has a very good power to weight ratio making it perfect for getting the job done quickly and professionally in those tight, awkward places.

Carry case included.

Specification

Input Power: 200W
Oscillating Speed: 26,000/min.
Oscillating Diameter: 1.4mm
Base Plate: 100 x 147mm
Weight: 1.25kg

PTDMPTFMS200

The NEW SXE 450 TurboTec boasts many new features over its predecessor. It has more power, but at the same time is more compact and 500 grams lighter. It also comes with an Intec dust filter unit to help aid dust containment, plus a new TurboBoost switch for maximum stock removal. The new TurboBoost switch also boosts performance. Improved ergonomics and styling for greater working comfort. Improved gearing and bearing system reduces vibration by 25% for greater working comfort and safety.

The orbit diameter range has increased from 3 - 6mm to 2.8 - 6.2mm giving a finer finish (2.8mm) and higher stock removal (6.2mm) capability allowing the machine to work harder so you dont have to. Improved dust retention system through use of the Metabo Intec filter cartridge.

Specification:

Input Power: 350W
Oscillating Speed: 0-13,100/min.
Oscillating Diameter: 2.8 or 6.2mm
Base Plate: 150mm
Weight: 2.2kg

This Metabo PRO PACK contains:

1 x SXE 450 TurboTec Sander
1 x Intec Dust Collection Cartridge
1 x 25 Pack of Mixed Sanding Discs
1 x Lambswool Bonnet
1 x Polishing Sponge
1 x Metabox III

PTDMPTSXE450PPL

The Flex VarioPlus Giraffe wall and ceiling sander is ideally suited for sanding plaster boards, solid Styropor insulation slabs, preparation for painting and polishing. It has electronic control which gives controlled constant speed, soft-start, overload protection and speed selection with an adjuster wheel. Using a unique telescopic system, the Vario-Giraffe adapts to your needs with the length being adjustable from 1330mm to 1730mm. The handle rotates through 360 .

The ergonomic design offers many different handling possibilities for fatigue-free working. The motor is always kept between the gripping positions, ensuring a perfect balance. The articulating sanding head can be adjusted to every tilt and angle.

The sander is fitted with interchangeable heads that are attached and removed with a click, including a triangular sander head. This is optimally suited to sanding corners and edges with the random orbital movement of the sanding head taking the abrasive right up to the edges with the backing pad.

The VarioPlus Giraffe has effective dust extraction from between the brush ring and the sanding pad (round), and through the 10-hole extraction ports it prevents premature clogging of the abrasive and promotes a healthy, dust-free working environment. The brush ring is spring-mounted so that the round sanding head accurately follows all uneven contours. This allows the head to be applied with fingertip precision and also prevents any dust escaping

Supplied with: Round and Triangular Sanding Heads, Hook & Loop Backed Sanding Paper, Hook & Loop Abrasive Paper, 32mm x 4m Vacuum Hose and a Padded Carry Case.

Specification

Input Power: 710W
Oscillating Speed: 1,000-1,500/min.
Corner Sander Oscillating Speed: 3,000-4,500/min.
Length: 1,330-1,730mm
Weight: 4.8kg

PTDGRPFLXWST700VP

The Flex Power Tools GE 5 + TB-L Giraffe Sander is fitted with electronic controls: controlled constant speed, soft start, overload protection and speed selection with an adjuster wheel. The gimbal-mounted sanding head provides high flexibility and optimum adjustment for sanding walls and ceilings.

It offers effective dust extraction from between the brush ring and sanding pad that prevents clogging of the abrasive and promotes a dust free environment. Fitted with an ergonomically shaped guide tube made from aluminium and a dust proof on/off switch.

It is a very handy, lightweight machine that provides optimum ease of operation and comfortable, ergonomic working conditions providing optimum balance between the motor and sanding head. The reliable force transmission and high flexibility come from the flexible drive shaft (FLEX Technology). This design minimises the principle weight on the giraffe head and increases optimum handling.

Optional connection of the FLEX safety vacuum cleaners to the FLEX Clip System on the guide tube.

Supplied with 1 x Hook & Loop Sanding Disc Supersoft, 1 x Clip-On Quick Clamping Ring SH-FC 32 and 1 x Padded Carrying Case.

Specification

Input Power: 500W
Oscillating Speed: 1,100-1,650/min.
Sanding Disc: 225mm
Tilt Angle on Head: 110
Length: 1520mm
Weight: 3.9kg

PTDFLXGE5TBL

The Flex POLISHFLEX is a variable-speed polisher with a high torque. It has a powerful 1,400 watt motor with highly-efficient ventilator for optimum cooling, making it ideal for heavy-duty applications. Its VR electronic control allows stepless speed selection, constant speed control by means of tachogenerator, overload protection and temperature monitoring. The continuous speed control trigger allows the speed to be locked on for continuous operation. The innovative combination of planetary and angular gears reduces noise to an absolute minimum. The flat gear head reduces distance to the surface meaning that the machine can therefore be operated safely in any position.

With a grip hood that is ergonomically shaped and soft grip handles, this machine can be controlled with precision and is always comfortable yet secure to hold. The polisher has a rubberised resting bar for safe setting down, and its 4 metre PUR H05-BQF cable is wear-resistant, flexible and highly resistant to cuts and abrasions.

The spindle lock is ideally positioned to prevent operating error and does not interfere with the grip area.

Specification

Input Power: 1,400W
Oscillating Speed: 380-2,100/min.
Max. Back-Up Pad Diameter: 150mm
Max. Polishing Pad Diameter: 200mm
Tool Fixture: M14
Weight: 2.3kg

Polisher only. No accessories supplied.

PTDFLXPE142150N

The Flex PE8 Rotary Polisher is ideal for polishing small areas. It is lightweight, easy to use and suitable for tight spaces. The polisher has a spindle lock and features VR electronic control. It has a soft-start, overload protection and selectable speed. Constant speed is controlled by a tachogenerator.

Polisher only. No accessories supplied.

Specification

Input Power: 800W
Oscillating Speed: 1,300-3,900/min.
Max. Back-Up Pad Diameter: 75mm
Max. Polishing Pad Diameter: 80mm
Tool Fixture: M14
Weight: 1.8kg

PTDFLXPE8480N

The Milwaukee AP 14-2 200E 200mm Polisher has a powerful 1450W motor for best performance in all applications. High torque gears for the best performance and no speed drop in low speed applications without overheating.

It has variable speed selection from 490 to 2100rpm for various applications. The speed settings are located on the top of the motor housing. For convenience it has thermal overload protection to prevent overheating, and a lock on function. There is a protected spindle lock button and a special finger grip area on the front providing additional secure grip.

Uses the unique flexible and soft hook and loop backing pad to prevent scratches on paint during work and the 6m long PUR cord prevents marks on the paint.

Supplied with: 2 x Polishing Sponges, 1 x Lambswool, 1 x Flexible Backing Pad, 1 x Cloth & 2 x Polishing Compound 250ml.

Specification

Input Power: 1,450W
Oscillating Speed: 490-2,100/min.
Max. Disc Diameter: 200mm
Spindle Size: M14
Weight: 2.6kg

PTDMILAP14ESET

Black and Decker KA900E Powerfile Belt Sander with a 13mm sanding belt, that is ideal for sanding, shaping, filing, sharpening and rust removal applications. Variable speed for optimal control and finish when sanding wood, metal, ceramic tiles, masonry, plaster and plastic.

Cyclonic action dust canister, for efficient dust collection and a cleaner work area. Has a powerful 350W motor enables optimal stock removal to get the job done quicker. The narrow arm allows for work in confined spaces, and has a screw operated belt tracking makes the sander easy to operate and prevents the belt from coming off the rollers during operation.

Applications: sanding curved surfaces, shaping wood, removing excess weld, filing down nails and screw heads, cleaning out apertures e.g. door locks, shaping ceramic tiles, removing rust, sharpening blades.

Specification

Input Power: 350W
Belt Speed: 900-1,400/min.
Belt Dimensions: 451 x 13mm
Cable Length: 3m

PTDB/DKA900E