TIMco Masonry Hanger - Stainless 47 x 200 Unit 1

Welded Masonry Joist Hangers - Stainless Steel

The TIMco Masonry Hanger range has been designed to support timber joists from a brick or block wall. Install by either building into the wall or for renovation work, rake out existing brickwork. Manufactured from A2 Stainless Steel for ultimate corrosion resistance. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.

Welded Masonry Joist Hangers - Stainless Steel

The TIMco Masonry Hanger range has been designed to support timber joists from a brick or block wall. Install by either building into the wall or for renovation work, rake out existing brickwork. Manufactured from A2 Stainless Steel for ultimate corrosion resistance. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.

Conforms to Eurocode 6 and service class 3

Hangers above 150mm are manufactured 10mm less to allow for notching and regularised timber

Pack Type Unit
Pack Qty 1
Approval BS 5628
H (mm) 190
B (mm) 80
Service Class 3
T (mm) 2.4
Pack Quantity Unit Each
Safe Working Load (kN) 3.5
Characteristic Value (kN) For Eurocode 5 6.7
Nail Holes (3.75mm) 6
Material Austenitic Stainless Steel (A2-304)
Corrosion Rating (1-5) 4 - Urban & industrial areas with a moderate salt atmosphere
MOQ 6
MOQ Increment 6
Joist Size W x H (mm) 47 x 200
W (mm) 47
Type Welded
CE Standard BS EN 845-12013
Eurocode 6
Packs per Carton 6
Pack Dimensions L x W x H (mm) 80 x 47 x 190
Pack Weight (kg) 0.53

PTDTIM47200WMHS