Core & Diamond Bits

The Faithfull tile max drill bits have a newly designed and unique asymmetric tip which has been diamond ground from the best quality tungsten. This enables the user to drill through a wide range of materials such as: PEl 5 class porcelain, ceramics, fine stoneware, marble, concrete, engineering brick and even granite.

The asymmetric drill design reduces resistance by 25%, ensuring that there is no wandering on start of drilling. There is also less chance of cracking or chipping (dependent on tile type) which leads to a perfectly formed round hole.

The low stress, high temperature brazing method used to attach the tip to the shank ensures that it remains attached under the most extreme drilling conditions. The ingenious triangular shaped shank guarantees no slip rotation in the drill chuck and the deep and wide fluting is able to cope with the maximum amount of spoil removal.

PTDGRPFAITM585

These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only.

They are ideal for drilling glass windows, mirrors, bottles and ceramics.

Lubricate with water for best results.

For use in variable speed drills only.

PTDGRPFAIGD3

The DEWALT Glass and Tile Drill Bits allow for easy and accurate positioning of hole and reduced risk of walking. Water greatly improves drill bit life and drilling speed.

The central core created during drilling stops drill wandering, and the core can be removed easily through the core ejection slot. For drilling holes in glass, slate, granite and tiles including porcelain tiles up to grade 5.

PTDGRPDEWDT6037QZ

Boa Quick Change Diamond Tip Drill Bits ith a vacuum brazed diamond tip, Boa Diamond Drills are developed for hard materials. This product has been 10 years in development with a welded diamond tip for greater strength and endurance.

Manufactured in the UK, these drills will perform beyond expectation, and with the addition of the Boa CCV (Cool Clear Vision) guide and water cooling device this product stands out from the competition.

PTDGRPBOA34005

The Irwin Granite drill bit range has been designed for impact / percussion drilling in very hard materials such as granite, concrete and natural stone.

They can drill 40% more holes than conventional masonry drill bits due to an extra hard, thicker and more robust carbide tip. The rounded cutting edges mean higher durability resulting in 50% more accurately sized holes per drill bit.

PTDGRPIRW10501894

The Black and Decker Tile & Glass Drill Bits have a special tip (TCT) for clean accurate holes in glass and ceramics.

PTDGRPBDX53252

Faithfull Diamond Core In One kits cut clean holes in brick and concrete blocks. They are ideal for plumbing, electrical, engineering installation and general building tasks.

All cores are 12 inch. BSP threaded with 8mm turbo segments.

Kit contains:

1 x Diamond Core.
1 x Adaptor.
1 x Pilot Drill.
1 x Extractor Drift Key.

ROTARY USE ONLY Must not be used on Percussion/Hammer mode

DO NOT USE DIAMOND CORES LARGER THAN 78mm IN DIAMETER WITH SDS PLUS DRILLS AS THIS MAY RESULT IN DAMAGE TO THE POWER TOOL OR SDS ADAPTOR.

Diamond Cores give the best results when used with a purpose built core drilling machine.

PTDGRPFAIDCIO107

Tile & Glass Drill Bits with cross-ground, tungsten carbide tip and a chrome plated finish. Ideal for glass, plaster backed tiles and soft ceramics.

PTDGRPKWB177005

The Irwin Diamond tipped drill bits are suitable for fast smooth cutting in all grades of hard and soft tiles. Their raised diamond grit edge makes for easy starting in hard tile without the need for a guide. The diamond grit is tough brazed diamond which ensures fast cutting and long life. The drill bits reverse spiral forces water towards its cutting head, keeping the diamonds cool to increase cutting speed and prolong life. Drilling with water will further increase the lifespan of the tool. The auto slug ejection slot allows the bits to be used for continuous, uninterrupted cutting.

PTDGRPIRW10507892

The Irwin Glass & Tile Drill Bits are suitable for drilling glass, porcelain and ceramics. Drill with low RPM (300RPM recommended), water cooling is also recommended. Do not use on hammer setting.

PTDGRPIRW10507902

High quality adaptors for use with Marcrist core drills.

PTDGRPMRC1010001

The DCU750 is a fast cutting, outstanding value for money dry diamond core drill bit. Suitable for drilling most building materials such as brickwork, breeze, medium concrete, engineering brick, some granites etc.

Cuts:

Aerated Concrete.
London Brick.
Breeze Blocks.
Block Paviors.
Concrete Bricks.
Set Stones.
Porotone.
Extremely Hard Blocks and Natural Stone.
Concrete Slabs.
Prefabricated Concrete.
Granite.
Engineering Brick.
Clay Pipes.

Safety: Marcrist diamond products comply with every known safety standard worldwide.

PTDGRPMRCDC28400

The Marcrist The DCU350 Dry Cores are ideal for the price aware professional with no compromise on quality, performance or safety.

Suitable for dry drilling of concrete products, bricks, poroton, london bricks and conrete pipes.

PTDGRPMRCDCU35028

Extensions for Marcrist core drills.

PTDGRPMRCE1010001

The Marcrist PG750X Tile and Porcelain Drills provide the perfect solution for dry tile drilling. They drill all tiles however hard - dry.

The drills are fast cutting and have an extremely long life. They drill 30-70 holes through grade 5 porcelain in approximately 35 seconds per hole.
Suitable for corded and cordless drilling.

PTDGRPMRCP7506X