Discs

The Batavia MADMAXX Diamond Saw Blade features 6 deep diamond cutting segments with heat dissipation slots for fast, effective cutting and extended life span. Cuts ceramic and marble tiles, circuit boards, fibreglass and reinforced plastics.

Specification:

Diameter: 89mm
Kerf: 1.8mm
Bore: 10mm

PTDBAT7061241

The Batavia MAXXSAW Diamond Saw Blade is manufactured from quality materials. Cuts ceramic tiles, printed circuit boards and glass fibre reinforced plastics.

Supplied as a twin pack of two blades. Can be used with the Batavia BAT7063379 Thor Saw.

Specification:

Diameter: 85mm
Bore: 10mm

PTDBAT7062143

The Makita D-18699 Metal Cutting Wheel can be used to cut sheet steel and steelwork. Suitable for metal cutting only.

Specification:

Diameter: 230mm
Thickness: 2.5mm
Bore: 22.23mm
Grit: A30S
Centre Type: Flat

PTDMAKD18699

The Evolution RAGE Segmented Rim Diamond Blade greatly enhances the Evolution multi-purpose saws versatility. It allows the machine to cut stone, concrete, paving slabs and marble. A durable blade which features a high concentration of diamond for longevity and a hot-pressed turbo segmented rim for consistent cutting ability.

PTDGRPHTC185DIAM

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturers instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

PTDGRPFAI10012M

Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs with a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications.

Metal cutting discs must always be presented to the workpiece at an angle of 90. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturers instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work
Dont use Depressed Centre cutting discs as grinding wheels

PTDGRPFAI1003MDC

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturers instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

PTDGRPFAI1003S

Depressed Centre Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Depressed centre cutting discs have been developed to make angle grinders more versatile in use by allowing better access in some applications.

Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturers instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

PTDGRPFAI1003SDC

Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

SAFETY TIPS

Read the manufacturers instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

PTDGRPFAI1005MDG

Depressed Centre Stone Grinding Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on stone and concrete. By presenting the disc to the workpiece at an angle of 45, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturers instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

PTDGRPFAI1006SDG

The Faithfull Diamond Blade Set contains a selection of 4 sintered diamond impregnated cutting blades - 3 segmented and one continuous rim turbo blade.

Segmented blades are ideal for general dry cutting applications of materials such as tiles, paving slabs, breeze blocks and brickwork.

The Turbo blade is designed to cut faster than a segmented blade and is perfect for the smooth cutting of tile products and are ideal for cutting: slate, marble, vitrified products, ceramic, stone, quarry tiles, engineering brick and granite.

PTDFAIDBSET4CT

DEWALT DT42240 Inox Metal/Stainless Cutting Disc for cutting all types of steel. They are made from a professional grade aluminium oxide formulation for high durability, aggressive cutting action and long life. With reinforced fibre glass and a premium resin bond.

Specification

Diameter: 115mm
Bore: 22.2mm
Thickness: 1.2mm

Tin of 10 DEWALT DT42335TZ Inox Metal/Stainless Cutting Disc 115 x 1.2 x 22.23mm

PTDDEWDT42335TZ

This Faithfull Contract Diamond Blade has 7mm sintered, diamond impregnated segments. Suitable for wet and dry cutting, and ideal for general cutting applications such as tiles, paving slabs, breeze blocks and brickwork.

Manufactured to EN 13236 Standards.

PTDGRPFAIDB115C

This Faithfull Contract Diamond Blade has 7mm sintered, diamond impregnated segments. Suitable for wet and dry cutting, and ideal for general cutting applications such as tiles, paving slabs, breeze blocks and brickwork.

Manufactured to EN 13236 Standards.

This Faithfull Contract Diamond Blade has the following specification:

Size: 115mm
Bore Size: 22.2mm
Pack Quantity: 1

PTDFAIDB115C

This Faithfull Contract Diamond Blade has 7mm sintered, diamond impregnated segments. Suitable for wet and dry cutting, and ideal for general cutting applications such as tiles, paving slabs, breeze blocks and brickwork.

Manufactured to EN 13236 Standards.

This Faithfull Contract Diamond Blade has the following specification:

Size: 230mm
Bore Size: 22.2mm
Pack Quantity: 1

PTDFAIDB230C