Respirators

Moldex Bitrex Fit Testing Kit.

The Approved Code of Practices supporting COSHH, CAR and CLAW stipulate that tight-fitting RPE (respiratory protective equipment) MUST be fit tested as part of the selection process. This is to ensure that the selected RPE has the potential to provide adequate protection for the wearer.

There are two main reasons for doing Bitrex testing. Firstly to make sure that the respirator itself is suited for the wearers particular face shape. Secondly to make sure that the respirator is fitted correctly to get a tight seal and ensure safety against hazards in the workplace. It is important to remember it is the suitability of the respirator that is being tested.

The Moldex MOL10301 Bitrex Fit Testing Kit contains:

2 x Nebulisers.
1 x Test Hood.
6 x 2.5ml Ampoules Bitrex Sensitivity Solution.
6 x 2.5ml Ampoules Bitrex Test Solution.
2 x Spare Parts For Nebulisers.
1 x Moldex Qualitative Fit Test CD.

PTDMOL10301

These Scan A1 Replacement Cartridges are suitable for Scan Twin Half Mask Respirators (SCAPPERESPA1 and SCAPPERESPP2). The filter provides low efficiency protection, and suitable for use with organic vapours and gases.

Conform to EN14387:2004

PTDSCAPPECARTA1

The Moldex Ultra Light Series 7000 Half Mask is extremely lightweight and the mask body is made from hypoallergenic material, which is gentle on the skin. The low profile design offers excellent field of vision. Easily accessible components for cleaning and maintenance.

Use with the Moldex EasyLock Filter system that requires no additional clips or holders.

Size: Medium

1 x Moldex MOL7002 Ultra Light Series 7000 Half Face Mask (Medium)

Filter cartridges NOT included.

PTDMOL7002

The Moldex Ultra Light Comfort Series 9000 Full Face Mask is extremely lightweight with excellent periphery vision. The lens is made from scratch resistant polycarbonate and is easy to clean thanks to the hydrophobic coating. Offering easy maintenance due to easily accessible components.

Use with Moldex EasyLock Filter system that requires no additional clips or holders.

Class 2, Size: Medium.

Filter cartridges NOT included.

PTDMOL9002

The Trend Airshield Pro Respirator is a fully protected powered respirator for use with all woodworking applications and is suitable for use when machining MDF. It is approved to new standard BS EN 12941.

New features include:
Combination face-seal and hood to improve protection.
Motor positioned away from the sensitive area of the forehead to reduce noise and irritation.
Attachment points for optional ear defenders.
Strategic component distribution ensures optimum centre of gravity is achieved for balance and comfort.
Twin filters with efficiency of 98%, more than double the Airshield MK1.
Audible low battery warning.
Removable 8-hour NiMH battery.

Specifications:
Rating: DIY/Craftsman/Professional.
Airflow Min: 160 l/Min.
Airflow fully charged: 200 1/Min.
Size of headband: 52cm - 62cm.
Motor sound level: 70 dB.
Battery: 8-hours NiMH battery.
Weight: 995 g.
Voltage: 230 volt.
Eye protection: BS EN 166 (low energy impact).
Respiratory protection: BS EN 12941 THP2(NPF50).

Pack of 2 filters, suitable for use against solid particulates only.

PTDTREAIRP1

The Trend Airshield Pro Respirator is a fully protected powered respirator for use with all woodworking applications and is suitable for use when machining MDF. It is approved to new standard BS EN 12941.

New features include:
Combination face-seal and hood to improve protection.
Motor positioned away from the sensitive area of the forehead to reduce noise and irritation.
Attachment points for optional ear defenders.
Strategic component distribution ensures optimum centre of gravity is achieved for balance and comfort.
Twin filters with efficiency of 98%, more than double the Airshield MK1.
Audible low battery warning.
Removable 8-hour NiMH battery.

Specifications:
Rating: DIY/Craftsman/Professional.
Airflow Min: 160 l/Min.
Airflow fully charged: 200 1/Min.
Size of headband: 52cm - 62cm.
Motor sound level: 70 dB.
Battery: 8-hours NiMH battery.
Weight: 995 g.
Voltage: 230 volt.
Eye protection: BS EN 166 (low energy impact).
Respiratory protection: BS EN 12941 THP2(NPF50).

PTDTREAIRPRO

The Trend Airshield Pro Respirator is a fully protected powered respirator for use with all woodworking applications and is suitable for use when machining MDF. It is approved to new standard BS EN 12941.

New features include:
Combination face-seal and hood to improve protection.
Motor positioned away from the sensitive area of the forehead to reduce noise and irritation.
Attachment points for optional ear defenders.
Strategic component distribution ensures optimum centre of gravity is achieved for balance and comfort.
Twin filters with efficiency of 98%, more than double the Airshield MK1.
Audible low battery warning.
Removable 8-hour NiMH battery.

Specifications:
Rating: DIY/Craftsman/Professional.
Airflow Min: 160 l/Min.
Airflow fully charged: 200 1/Min.
Size of headband: 52cm - 62cm.
Motor sound level: 70 dB.
Battery: 8-hours NiMH battery.
Weight: 995 g.
Voltage: 230 volt.
Eye protection: BS EN 166 (low energy impact).
Respiratory protection: BS EN 12941 THP2(NPF50).

PTDGRPTREAIRPRO

Replacement gas filter for the 8000 series half mask. ABEK1 protection against organic [boiling point >65C] + inorganic gases & vapours, acid gases and ammonia.

Tested and certified to EN 14387:2004+A1:2008.

PTDMOL890001

The Moldex 5000 Series Disposable Half Masks have integral gas filters, making the mask disposable and exempt from the maintenance requirements of COSHH if disposed of within one month. When particulate filters get clogged they can be replaced for prolonged use of the mask.

ABEK1 protection against organic [boiling point >65C] + inorganic gases & vapours, acid gases and ammonia. Plus P3 protection against harmful and toxic dusts, fumes and aerosols based on water and oil.

10 x Workplace exposure limit (half mask)
or 1000 ppm whichever is lower.

PTDMOL598401

Moldex EasyLock Filters for Series 7000 & 9000 masks. No need for additional clips or holders, different gas and particulate filters can be combined. EasyLock particulate filters can either be connected to the EasyLock gas cartridge or directly to the mask body. Adaptors or particulate pre-filters are not necessary.

ABEK1 protection against organic [boiling point >65C] + inorganic gases & vapours, acid gases and ammonia. Plus P3 protection against harmful and toxic dusts, fumes and aerosols based on water and oil.

10 x Workplace Exposure Limit (Half Mask).
20 x Workplace Exposure Limit (Full Face Mask).
OR 1000 ppm whichever is lower.

Tested and certified to EN 14387:2004+A1:2008.

Wrap of 2 Moldex EasyLock ABEK1P3 R D Pre-assembled Filter

PTDMOL9430

Twin Half Mask Respirator. A premium half mask, offering maximum protection and comfort. An extra wide sealing surface gives unparalleled comfort and fit.
Low resistance exhalation valve for easy breathing. Durable thermoplastic rubber mask and wide adjustable elastic strap make for a perfect fit. Fully adjustable 4-point cradle suspension ensuring an effective fit. Low profile angular filter design for minimal visual impairment. Manufactured from hypo-allergenic medical grade PVC.

SCAPPERESPA1 Supplied with A1 cartridges for organic vapours and gases, Conforms to EN140:1998 and EN14387:2004

SCAPPERESPP2 Supplied with P2 dust filter cartridges, Conforms to EN140:1998 and EN143:2000/A1:2006

PTDGRPSCAPPERESPA1

The Moldex Ultra Light Series 7000 Half Mask is extremely lightweight and the mask body is made from hypoallergenic material, which is gentle on the skin. The low profile design offers excellent field of vision. Easily accessible components for cleaning and maintenance.

Use with the Moldex EasyLock Filter system that requires no additional clips or holders.

Size: Medium

PTDGRPMOL7002

The Moldex Ultra Light Comfort Series 9000 Full Face Mask is extremely lightweight with excellent periphery vision. The lens is made from scratch resistant polycarbonate and is easy to clean thanks to the hydrophobic coating. Offering easy maintenance due to easily accessible components.

Use with Moldex EasyLock Filter system that requires no additional clips or holders.

Class 2, Size: Medium.

PTDGRPMOL9002

The Moldex Ultra Light Comfort Series 9000 Full Face Mask is extremely lightweight with excellent periphery vision. The lens is made from scratch resistant polycarbonate and is easy to clean thanks to the hydrophobic coating. Offering easy maintenance due to easily accessible components.

Use with Moldex EasyLock Filter system that requires no additional clips or holders.

Class 2, Size: Medium.

Supplied with 2 x ABEK1P3 R Pre-Assembled Gas & Particulate Filter. Uses the EasyLock Filter system that requires no additional clips or holders. The AirWave Pleated Particulate Filter reduces breathing resistance and increases wearer comfort.

ABEK1 for protection against organic, inorganic, ammonia and acid gases [Bp>65C]. P3 protection against harmful and toxic dusts, fumes and water/oil based mists/aerosols .

Tested and certified to EN 14387:2004+A1:2008.

PTDMOL943201

The Moldex Ultra Light Series 7000 Half Mask is extremely lightweight and the mask body is made from hypoallergenic material, which is gentle on the skin. The low profile design offers excellent field of vision. Easily accessible components for cleaning and maintenance.

Use with the Moldex EasyLock Filter system that requires no additional clips or holders.

Size: Medium

Supplied with 2 x A1P2 R Pre-Assembled Gas & Particulate Filters. Uses the EasyLock Filter system that requires no additional clips or holders. The AirWave Pleated Particulate Filter reduces breathing resistance and increases wearer comfort.

A1 for protection against organic gas [Bp>65C]. P2 protection against toxic dusts, fumes and water/oil based mists/aerosols.

Tested and certified to EN 14387:2004+A1:2008.

PTDMOL712202