Parallel Pin Punches

A 6-piece pin punch set made from quality chrome vanadium steel gives increased strength and durability, for retained accuracy when marking out centre lines, hole locations and pilot drill starting points.

Quenched and tempered to precise specifications.

Contains the following sizes: 1.5, 3, 4, 5, 6, and 8mm (1/16, 1/8, 5/32, 3/16, 1/4, 5/16in).

PTDSTA418226

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes.

The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.

Size 1.6mm (1/16 in).

PTDPRI135116

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes.

The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.

Size 3/32in.

PTDPRI135332

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes.

The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.

Size 3.2mm (1/8 in).

PTDPRI13518

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes.

The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.

Size 4.0mm (5/32 in)

PTDPRI135532

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes.

The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.

Size 4.8mm (3/16 in).

PTDPRI135316

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes.

The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.

Size 5.5mm (7/32 in).

PTDPRI135732

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes.

The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.

Size 6.4mm (1/4 in).

PTDPRI13514

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes.

The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.

Size 8mm (5/16 in).

PTDPRI135516

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes.

The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.

Size 9.5mm (3/8 in).

PTDPRI13538

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes.

The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.

Walleted set of 6 containing one of each of the following sizes.

1/16, 1/8, 3/16, 1/4, 5/16, and 3/8in.

PTDPRI135SET6

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes.

The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.

Walleted set of 9 containing one of each of the following sizes.

1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, and 3/8in.

PTDPRI135SET9

Hexagonal bodied parallel pin punches with extra long pins. Used for driving out long retaining pins. The pin should be first started with a hand or taper punch to avoid damage to the point of the pin punch.

Pin length: 63mm (2.1/2in).
Overall length: 152mm (6in).

Size. 3.2mm (1/8 in).

PTDPRI14518

Hexagonal bodied parallel pin punches with extra long pins. Used for driving out long retaining pins. The pin should be first started with a hand or taper punch to avoid damage to the point of the pin punch.

Pin length: 63mm (2.1/2in).
Overall length: 152mm (6in).

Size. 4mm (5/32 in).

PTDPRI145532

Hexagonal bodied parallel pin punches with extra long pins. Used for driving out long retaining pins. The pin should be first started with a hand or taper punch to avoid damage to the point of the pin punch.

Pin length: 63mm (2.1/2in).
Overall length: 152mm (6in).

Size. 4.8mm (3/16 in).

PTDPRI145316