Half Round Files

Bahco Handled Half-Round Cut File with a ERGO handle is a tapered half round file with cross section which allows use on convex and concave surfaces, suitable for deburring work. The edges and surfaces are tapered towards the point. 8in file are semi-pointed. Double cut.

Second Cut: approx. 36 teeth per 25mm (Medium).
Bastard Cut: approx. 26 teeth per 25mm (Coarse).

PTDGRPBAH21081H

Diamond File Crystal Saver, smoothes sharp jagged edges on any glass.

Simply moisten the file, rub back and forth with the round side in recessed edges and then with the flat side on sharp raised corners.

Generally only a few strokes are needed.
325grit.

PTDDMTC00

Bahco Half-Round Cut File with a tapered half-round cross section to allow use on convex and concave surfaces. The edges and surfaces are tapered towards the point. It has a double cut surface, and it suitable for deburring work.

Smooth Cut: approx. 62 teeth per 25mm (Fine).
Second Cut: approx. 36 teeth per 25mm (Medium).
Bastard Cut: approx. 26 teeth per 25mm (Coarse).

Size 250mm (10in)
Cut: half-round bastard.
Tanged.

PTDBAHHRB10

Bahco Half-Round Cut File with a tapered half-round cross section to allow use on convex and concave surfaces. The edges and surfaces are tapered towards the point. It has a double cut surface, and it suitable for deburring work.

Smooth Cut: approx. 62 teeth per 25mm (Fine).
Second Cut: approx. 36 teeth per 25mm (Medium).
Bastard Cut: approx. 26 teeth per 25mm (Coarse).

Size 300mm (12in)
Cut: half-round bastard.
Tanged.

PTDBAHHRB12

Bahco Half-Round Cut File with a tapered half-round cross section to allow use on convex and concave surfaces. The edges and surfaces are tapered towards the point. It has a double cut surface, and it suitable for deburring work.

Smooth Cut: approx. 62 teeth per 25mm (Fine).
Second Cut: approx. 36 teeth per 25mm (Medium).
Bastard Cut: approx. 26 teeth per 25mm (Coarse).

Size 150mm (6in)
Cut: half round bastard.
Tanged.

PTDBAHHRB6

Bahco Half-Round Cut File with a tapered half-round cross section to allow use on convex and concave surfaces. The edges and surfaces are tapered towards the point. It has a double cut surface, and it suitable for deburring work.

Smooth Cut: approx. 62 teeth per 25mm (Fine).
Second Cut: approx. 36 teeth per 25mm (Medium).
Bastard Cut: approx. 26 teeth per 25mm (Coarse).

Size 200mm (8in)
Cut: half-round bastard.
Tanged.

PTDBAHHRB8

Tapered half-round cross section allows use on convex and concave surfaces.

Suitable for deburring work.

The edges and surfaces are tapered towards the point. 4in and 6in files are fully pointed, 8in and longer semi-pointed. Double cut.

Size 300mm (12in)
Cut: half round second.
Tanged

PTDBAHHRSC12

Tapered half-round cross section allows use on convex and concave surfaces.

Suitable for deburring work.

The edges and surfaces are tapered towards the point. 4in and 6in files are fully pointed, 8in and longer semi-pointed. Double cut.

Size 150mm (6in)
Cut: half round second.
Tanged.

PTDBAHHRSC6

Tapered half round cross section allows use on convex and concave surfaces.

Suitable for deburring work.

The edges and surfaces are tapered towards the point. 4in and 6in files are fully pointed, 8in and longer semi-pointed. Double cut.

Size 250mm (10in)
Cut: half round smooth.
Tanged.

PTDBAHHRSM10

Tapered half round cross section allows use on convex and concave surfaces.

Suitable for deburring work.

The edges and surfaces are tapered towards the point. 4in and 6in files are fully pointed, 8in and longer semi-pointed. Double cut.

Size 300mm (12in)
Cut: half round smooth.
Tanged.

PTDBAHHRSM12

Tapered half round cross section allows use on convex and concave surfaces.

Suitable for deburring work.

The edges and surfaces are tapered towards the point. 4in and 6in files are fully pointed, 8in and longer semi-pointed. Double cut.

Size 200mm (8in)
Cut: half round smooth.
Tanged.

PTDBAHHRSM8

This Faithfull Half-Round Second Cut Engineers File is a very useful file combining the features of both round and flat files, one side being rounded and the other flat. It can be used on flat, concave and convex surfaces. It is tapered towards the point in width and thickness. It is double cut with a safe edge. It is fitted with a comfortable handle. Ideal for professional and frequent DIY use.

The FAIFIHRSC10 half round engineers file has the following specifications:
Blade Length: 250mm (10in).
Blade Width: 24mm (7/8in).

PTDFAIFIHRSC10

This Faithfull Half-Round Second Cut Engineers File is a very useful file combining the features of both round and flat files, one side being rounded and the other flat. It can be used on flat, concave and convex surfaces. It is tapered towards the point in width and thickness. It is double cut with a safe edge. It is fitted with a comfortable handle. Ideal for professional and frequent DIY use.

The FAIFIHRSC12 half round engineers file has the following specifications:
Length: 300mm (12in).
Blade Width: 29mm (1.1/8in).

PTDFAIFIHRSC12

This Faithfull Half-Round Second Cut Engineers File is a very useful file combining the features of both round and flat files, one side being rounded and the other flat. It can be used on flat, concave and convex surfaces. It is tapered towards the point in width and thickness. It is double cut with a safe edge. It is fitted with a comfortable handle. Ideal for professional and frequent DIY use.

Cut half round second
Blade Length: 200mm (8in)
Blade Width: 20mm (3/4in)

PTDFAIFIHRSC8

This Faithfull Half-Round Second Cut Engineers File is a very useful file combining the features of both round and flat files, one side being rounded and the other flat. It can be used on flat, concave and convex surfaces. It is tapered towards the point in width and thickness. It is double cut with a safe edge. It is fitted with a comfortable handle. Ideal for professional and frequent DIY use.

The FAIFIHRSC6 Engineers File has the following specifications:
Cut: Half-Round Second.
Blade Length: 150mm (6 in).
Blade Width: 16mm (5/8 in).

PTDFAIFIHRSC6