Files

This file blade has convex surfaces, milled with curved teeth for work in sheet metal, car bodywork etc. and soft materials requiring fast removal rate and a smooth finish.

Size 300mm (12in)
13 Teeth per inch
Drilled holes for holder screws

PTDFILPHB1312

Needle rasps are used in applications where the surface finish takes priority over fast stock removal rates and are most suited for smaller workpieces.
They are often used by engineers and model makers where precision is required.
Each set contains six files fitted with comfortable soft grip handles,the files have a working length of 65mm, blade length of 100mm and an overall length of 150mm.

Rasp set is ideal for use on wood.

Six different file profiles as follows:

Half-round, round, flat taper, square, flat, three-square.

PTDFAIPPWRASP

Used correctly, this diamond chainsaw file will last a long time and increase the life of a chainsaw blade. Often only one or two light strokes are sufficient to put a sharp edge back on the blade. Blue Coarse Grit.

PTDGRPDMTFCS5C

Plain Horse Rasps are double ended with rasp teeth on one side and file teeth on the other.

The edges are single cut.

Overall length: 350mm (14in).

PTDNICRHR14

Used by cabinet makers and woodworkers. Single cut on edges. Half-Round with the curved side having a larger radius than wood rasp.

Length 250mm (10in).

Half-Round Regular Cut Tanged.

PTDNICCR10

Double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools.

Slightly tapered towards tip for surface filing.

PTDGRPBAHSSM4

Diamond needle files are used in applications where the surface finish takes priority over fast stock removal rates and are most suited for smaller workpieces.
They are often used by engineers and model makers where precision is required.
Each set contains six files fitted with comfortable soft grip handles, the files have a working length of 50mm, blade length of 100mm and an overall length of 150mm.

Diamond files are suitable for use on metal and plastic.

Six different file profiles as follows:

Half-round, round, flat taper, square, flat, three-square.

PTDFAIPPDIAMOND

Needle files are used in applications where the surface finish takes priority over fast stock removal rates and are most suited for smaller workpieces.
They are often used by engineers and model makers where precision is required.
Each set contains six files fitted with comfortable soft grip handles, the files have a working length of 65mm, blade length of 100mm and an overall length of 150mm.

Suitable for use on metal and plastic.

Six different file profiles as follows:
Half-round, round, flat taper, square, flat, three-square.

PTDFAIPPNEEDLE

The Bahco Chainsaw File 168 has smooth single cut teeth for sharpening round hooded chainsaw teeth.

Safe point and special tooth construction for rapid cutting.

PTDGRPBAHCS18

Faithfull Chainsaw Files are ideal for sharpening round hooked chainsaw teeth. They are perfect for professional and frequent DIY use and fitted with a comfortable handle.

Supplied in a blister pack.

PTDGRPFAIPPC532

Curved tooth files are made from alloy steel and have teeth which are undercut resulting in faster cutting with less effort.

They may be used on all materials from aluminium to hardest steel without clogging.

The undercut and generous radius at the root of the teeth enables the file to clear itself whilst in use.

Dreadnought files feature a curved tooth across the blade.

PTDGRPFILDTH98

Curved tooth files are made from alloy steel and have teeth which are undercut resulting in faster cutting with less effort.

They may be used on all materials from aluminium to hardest steel without clogging.

The undercut and generous radius at the root of the teeth enables the file to clear itself whilst in use.

Dreadnought files feature a curved tooth across the blade.

Length: 200mm (8in)
9tpi
Hand

PTDFILDTH98

Curved tooth files are made from alloy steel and have teeth which are undercut resulting in faster cutting with less effort.

They may be used on all materials from aluminium to hardest steel without clogging.

The undercut and generous radius at the root of the teeth enables the file to clear itself whilst in use.

Dreadnought files feature a curved tooth across the blade.

Length 250mm (10in)
9tp
Hand

PTDFILDTH910

Curved tooth files are made from alloy steel and have teeth which are undercut resulting in faster cutting with less effort.

They may be used on all materials from aluminium to hardest steel without clogging.

The undercut and generous radius at the root of the teeth enables the file to clear itself whilst in use.

Dreadnought files feature a curved tooth across the blade.

Length 300mm (12in)
9tpi
Hand

PTDFILDTH912

Curved tooth files are made from alloy steel and have teeth which are undercut resulting in faster cutting with less effort.

They may be used on all materials from aluminium to hardest steel without clogging.

The undercut and generous radius at the root of the teeth enables the file to clear itself whilst in use.

Dreadnought files feature a curved tooth across the blade.

Length 350mm (14in)
9tpi
Hand

PTDFILDTH914