Hand Planes

This fully adjustable Block Plane has a body made from fine grey iron which is precision machined. It is fully adjustable for depth of cut, cutter alignment and size of mouth.
It is ideal for end grain and general-purpose fine finishing work and comes with a pouch for convenient storage. The precision carbon alloy steel blade is 40mm wide.

Cutter seats at 21 degrees.

Length: 6.1/4in.
Cutter width: 1.5/8in.

PTDSTA512020

The Faithfull No.6 Fore plane performs a dual role between stock removal and truing up long edges or levelling wide boards.

Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools.

Cutter Width: 60mm (2.3/8in).
Overall Length: 457mm (18in).

PTDFAIPLANE6

A manually adjustable general-purpose Block plane. Ideal for model makers, craft applications and light-duty jobs.

Cutter Width: 35 mm (1.3/8in).
Length: 140 mm (5.1/2in).

PTDSTA112102

This professional general-purpose adjustable Block Plane has a fine grey iron body and is adjustable for depth of cut and alignment.

A block plane is designed to cut end grain and is typically small enough to be used with one hand with the cutting blade (also known as an iron) bedded at a lower angle with the bevel up compared against other planes. It is frequently used for paring end grain, possible because its blade had been set at a shallow bed angle. This allows the blade to slice through end grain more efficiently; furthermore, for this to work, the plane is frequently held at an angle sometimes as much as 45 to the direction of travel, so that the cutting edge slices the wood fibers as they pass from one end of the cutting edge to the other.

A block plane has many other uses in woodworking, ideal for cleaning up components by removing thin shavings of wood in to make a component fit within fine tolerances. Chamfering (angling square edges) and removing glue lines are some of the other uses woodworkers find for the block plane.

Cutter Width: 40mm (1.5/8in).
Length: 180mm (7in).

PTDSTA112220

The Bailey Jack plane is designed for rapid stock removal when preparing timber prior to finishing. Machined frog and cutter seatings to eliminate blade chatter. Unbreakable plastic handles and special cap iron design which curves shavings and prevents clogging.

Cutter Width: 50mm (2in).
Length: 355mm (14in).

PTDSTA112005

The Jointer Plane performs a dual role between stock removal and accurately truing up long edges or levelling wide boards. It is fully adjustable and has a machined frog and cutter seating to reduce chatter.

Cutter Width: 60mm (2.3/8in).
Length: 560mm (22in).

PTDSTA112007

The Faithfull traditional No.10 bench rebate plane designed for cleaning up wide rebates and shoulders or large joints and for general bench joinery, where a full width cutter is required. Suitable for use on both hard and soft woods.

The high quality grey cast iron body provides both strength and stability, with a precision ground base and sides for flatness and squareness, a machined blade seating eliminates movement and blade judder. The lever cap is fitted with a brass locking screw securing the blade assembly and enables easy release for sharpening. Hardwood handle and knob for user comfort, all parts are precision machined for accurate adjustment.

Cutter Width: 50mm (2in).
Overall Length: 330mm (13in).

PTDFAIPLANE10

Stanley spares kit 2 fits product numbers 12-045, 005, 055, 006, 007, 145, 015, 155, 016, 011 and 017 plus 12-905 and 906.

Contents:

1 x 12216C Handle.
1 x 33001C Handle Rod (metric).
1 x 83258C Handle Rod (imperial).
1 x 12192C Knob.
1 x 32988C Knob Rod (metric).
1 x 83271C Knob Rod (imperial).
2 x 36122C Knob and Handle Nuts (metric).
2 x 34435C Knob and Handle Nuts (imperial).
4 x 26951C Knob and Handle Washers.
1 x 37113C Handle Toe Screw (metric).
1 x 83284C Handle Toe Screw (imperial).

PTDSSP112701

Spares kit 3 to fit product numbers 12-003, 004, 045, 005, 055, 006, 007, 013, 014, 145, 015, 155, 016, 017, 204, 205, 011 and 048.

36083C Frog Screw (metric), 83287C Frog Screw (imperial), 22511C Frog Washer, 33066C Lever Screw, 36096C Frog Adjusting Screw (metric), 32864C Frog Adjusting Screw (imperial), 33009C Cap Screw, 32975C Handle Rod (metric), 33001C Handle Rod (metric) (large handle), 83232C Handle Rod (imperial), 32988C Knob Rod (metric), 83245C Knob Rod (imperial), 83271C Knob Rod (imperial) (large knob), 36122C Knob and Handle Nuts (metric), 34435C Knob and Handle Nuts (imperial), 26951C Knob and Handle Washers, 37113C Handle Toe Screw (metric), 36396C Handle Toe Screw-Imperial, 34419C Cutter Adj Nut (brass), 34427C Adj Nut Screw.

PTDSSP112702

A Handyman Bench Plane for workshop, site or finishing tool. Chrome carbon steel cutters fully adjustable for cutter alignment and depth of cut.
A high-quality iron base with handle and knob in high impact polystyrene.

Cutter Width: 50mm (2in).
Length: 245mm (9.3/4in).

PTDSTA112204

This rebate plane is made from fine grey iron with all working surfaces accurately machined for precise results. Two cutter positions for regular and bull nose work. The cutter is adjustable for depth of cut in the rear position. To accurately control dimensions of the rebate, an adjustable fence depth gauge is supplied. A cutting spur is also provided for cross grain work.

Cutter Width: 38mm (1.1/2in).
Length: 250mm (10in).

PTDSTA112078

IRWIN Record replacement single iron for the 778 Rebate Plane.

Size: 38mm (1 1/2 in).

PTDRECC778

Replacement Single Iron for the Record 0220, 091/2, 0601/2, 0120, planes.

Size: 41mm (1 5/8 in).

PTDRECC0220

IRWIN Record 07 Jointer Plane features a tungsten vanadium cutter blade, accurately machined blade setting, full adjustment, selected hardwood handle and knob, cast iron base, frog and lever cap and a traditional brass adjusting nut.

It is used for removing the roughness and uneveness on long surfaces prior to smoothing.

Cutter Width: 60mm (2.3/8in).
Length: 560mm (22in).

PTDREC07

A No.5 size Handyman Jack plane for rapid stock removal prior to commencing assembly work. Fully adjustable for cutter alignment and depth of cut.
Fine grey iron base with handle and knob in high impact polystyrene and chrome carbon steel cutters.

Cutter Width: 50mm (2in).
Length: 355mm (14in).

PTDSTA112205