Stains Preservers & Treatments
- Cuprinol Spray Fence Treatment Range
Cuprinol One Coat Sprayable Fence Treatment has been specially developed for use with the Cuprinol Fence Sprayer and the Cuprinol Power Sprayer. Breakthrough technology allows you to spray accurately and evenly with minimal effort to achieve a professional finish in just one coat. The sprayer allows you to reach all awkward spaces without the need for a brush. Sprayable Fence Treatment is quick drying, pleasant to use and is safe for use near plants and pets and when youre finished, simply flush the sprayer through with water. Time efficient, this treatment enables each fence panel to be treated in less than 4 minutes - a fraction of the time that it would normally take with a brush.
Coverage: A 5 litre pack will cover up to 15 square metres
Available in a range of colours.
PTDGRPCUPSFTAB5LLearn MoreCuprinol Shed & Fence Protector Range
Cuprinol Shed & Fence Protector is a lightly tinted, solvent-based formulation that penetrates deep into the wood to give natural, rustic looking colour to both rough sawn and smooth planed timber. It also contains water repellents to help resist rain penetration.
PTDGRPCUPSFAB1LLearn MoreCuprinol Garden Shades Range
Cuprinol Garden Shades has been specially developed to colour and protect sheds, fences and other garden wood, with 6 years weather protection. Its special pigments ensure a rich colour and allow the natural texture of the woodgrain to shine through.
It can also be applied on terracotta, brick and stone, to bring beautiful colours to the rest of the garden.
It is water-based and harmless to plants and pets.
PTDGRPCUPGSBAR1LLearn MoreCuprinol UV Guard Decking Oil Range
Cuprinol UV Guard Decking Oil can be brushed or spray applied to penetrate into the wood to replace natural oils and resins lost through weathering. Its tinted formula revitalises the colour of weathered wood.
A 2.5 Litre Can covers up to 20m with 2 coats brush applied or 1 coat spray applied. Coverage can vary depending on application method and the condition and nature of the surface. Drying times is up to 6 hours but this can vary depending on the nature of the surface and the weather conditions.
PTDGRPCUPDPGT5LLearn MoreCuprinol Ducksback 5 Year Waterproof for Sheds & Fences Range
Cuprinol 5 Year Ducksback has an advanced, wax enriched, formulation that colours and weather protects rough sawn garden wood for up to 5 years. The formulation is also showerproof in 1 hour. Its non-drip formulation minimises mess during application. It is quick drying, low odour and safe to use to use around plants and pets.
Ducksback is ideal for restoring and enhancing the appearance of sheds and fences and will help to keep them looking good for years to come.
Coverage: A 5 litre pack covers to to 24 square metres with one coat.
PTDGRPCUPDBAB5LLearn MoreCuprinol Anti Slip Decking Stain Range
Cuprinol Anti Slip Decking Stain with invisible anti-slip microbeads gives a semi-transparent matt finish specially formulated for all types of timber decking. It provides both colour and a tough durable protective coat that resists cracking and peeling.
It is water repellent to help prevent wood cracking and splitting and it is showerproof in less than an hour. Also suitable for use on other garden wood and is safe for plants and pets when dry.
It has an average coverage of approx 20m with 2 coats
PTDGRPCUPUTDSAM25LLearn MoreCuprinol Less Mess Fence Care Range
Cuprinol Less Mess Fence Care has been specially formulated to colour and protect rough sawn timber. The new formulation makes it easier to apply. Its special pigments ensure rich colour and even coverage in just one coat. It is quick-drying, low odour and safe to use around plants and pets.
PTDGRPCUPLMFCAR6LLearn MoreEverbuild Lumberjack Wood Preserver Range
WOOD PRESERVER is a low solvent, low odour solution based on Micro-fine active technology. The fungicides and algaecides present in these formulations are finely dispersed so that wood penetration and hence effectiveness is much greater than standard wood preservation products. In addition the use of ultra light fast pigments on the coloured variants give an even fade resistant finish which will last for years.
WOOD PRESERVER is fast drying and non flammable and application to wet timbers is possible without loss of performance. It is specifically designed to deeply penetrate all wood and joinery to give long lasting protection from damage caused by wet rot, dry rot, decay and fungi.
Solvent Free formula.
Internal and external use.
Can be applied to damp timbers.
PTDGRPEVBLJCR05Learn MoreEverbuild Triple Action Wood Treatment Range
TRIPLE ACTION WOOD TREATMENT takes care of all your wood treatment and preservation needs in the one can. It is a low solvent, low odour solution based on Micro-fine active technology with added fungicides, algaecides and Permethrin to actively kill and protect against all known wood rot, decay, fungi and wood boring insects. The fungicides and algaecides present in these formulations are finely dispersed so that wood penetration and hence effectiveness is much greater than standard wood preservation products.
TRIPLE ACTION WOOD TREATMENT is fast drying and non flammable and application to wet timbers is possible without loss of performance. It is specifically designed to deeply penetrate all wood and joinery to give long lasting protection from damage caused by wet rot, dry rot, decay; fungi and wood boring insects/larvae.
PTDGRPEVBLJUN01Learn MoreCuprinol Garden Furniture Stain Range
The Cuprinol Softwood & Hardwood Furniture Stain creates a lasting water-repellent barrier and weather protection. Suitable for all woods, including hardwood and softwood. It adds a rich colour to softwood and a light tint to hardwood.
Coverage: Up to 15 square metres per 750ml.
PTDGRPCUPGFSC750Learn MoreSikkens Cetol Filter 7 Plus Translucent Woodstain Range
A highly durable, solvent-borne, highly translucent satin woodstain.
Cetol Filter 7 is a highly translucent satin exterior woodstain for windows and doors. It can be used as a maintenance coat for existing woodstain systems or over a base stain of Cetol HLS on new or bare timbers.
Cetol Filter 7 is an exterior woodstain for windows and doors, either as a one-coat maintenance application for existing woodstain systems or two coats over a base stain of Cetol HLS on new or bare timbers. Its advanced UV light absorbers provide superior protection from the damaging effects of sunlight on timber.
It is not, however, suitable for decking or other areas subjected to high levels of abrasion.
PTDGRPSIKCF7PLO1LLearn MoreSikkens Cetol HLS Plus Translucent Woodstain Range
Sikkens Cetol HLS Plus Translucent Woodstain is a low build, solvent-borne semi - gloss woodstain that can be used both as a base stain and as a finishing coat.
It is highly translucent to bring out the beauty of woodgrain, it protects against mould and algae and is resistant to UV radiation, peeling and cracking.
Cetol HLS Plus is also microporous and water-repellent
It can be used as a finishing coat on exterior softwood and hardwood substrates such as cladding, fascias, soffits, rough sawn timber and fencing.
As a base stain, Cetol HLS plus is readily absorbed into timber to provide a sound base for finishing coats. It can be used alone as a system on cladding, decking and garden furniture or as a base stain before the application of Cetol Filter 7 plus or Cetol THB plus on windows and doors.
However it should not be used alone as a finish for hardwood timbers.
PTDGRPSIKCHLSPLO1LLearn MoreSikkens Cetol THB Plus Translucent Woodstain Range
A medium build, solvent-borne woodstain that gives a translucent semi-gloss finish, and is suitable for areas where more frequent maintenance periods are acceptable. It is suitable for use on exterior softwood and hardwood joinery, windows and doors.
Cetol THB PLUS is a translucent semi-gloss finish coating for use over Cetol HLS PLUS or as a maintenance coat for existing woodstain systems on windows and doors.
Cetol THB plus is highly suitable as an alternative to Cetol Filter 7 plus for use on less exposed surfaces, or where slightly more frequent maintenance periods are acceptable.
It is not suitable for use on decking or other areas subjected to high levels of abrasion.
PTDGRPSIKCTHBPLO1LLearn MoreCuprinol 5 Star Complete Wood Treatment Range
Cuprinol 5 Star Complete Wood Treatment (FP) is a clear water based wood treatment for the combined eradication of the two main enemies of timber, rot and insect attack. Drying time can vary from 2 to 5 days under average temperature and with good ventilation, but longer under less favourable conditions. 6 to 8 weeks before laying certain types of floor covering.
How to Apply:
Wherever possible dip timber in fluid for at least 3 minutes, Otherwise apply uniformly to wooden ends and joints with at least two coats. Apply the second coat after the previous coat has soaked in but before it is dry. Re-treat any surfaces cut after treatment.
After fully dry, glues, fillers and knotting can be used as normal. Bitumen, rubber and some plastic based materials may soften or swell on contact with fluid or solvent vapour.
Note: The application of this product may cause darkening of some timbers. If colour is critical, try a test area first and allow to dry fully to ensure final appearance is acceptable.
PTDGRPCUP5ST1LLearn MoreCuprinol Ultimate Garden Wood Preserver Range
Cuprinol Ultimate Garden Wood Preserver has a superior, water-based formulation that works in 3 ways. Its UV filters give long lasting colour for up to 5 years, added waxes and resins provide advanced weather protection and active ingredients penetrate deep into the wood to protect against rot, decay and blue stain.
Ultimate Garden Wood Preserver can be used on all types of rough or planed wood such as sheds, fences, summer houses, gates and arbours.
Drying time: 2-6 hours.
PTDGRPCUPGWPREAB1LLearn MoreStains Preservers & Treatments
VAT Number: 100 5143 84