6 items

Woodworm Treatment

Woodworm Treatment
View as Grid List

6 items

Set Ascending Direction Set Descending Direction
  1. Cuprinol Low Odour Woodworm Killer 1 Litre

    SKU: PTDCUPWW1L

    £24.19

    Cuprinol Woodworm Killer (WB) kills all types of wood-boring beetle larvae. Its deep penetration ensures effective protection for years to come.

    This low odour, water based formula has been specially developed to make it more pleasant and convenient to use.

    Application:

    Bare Wood: Flood surfaces with 2 or 3 brush coats. Pay particular attention to endgrain, corners, joints, crevices, etc. In severe cases, also inject into flight holes 7-10cm (3-4ins) apart and repeat treatment. Re-treat surfaces cut after treatment.

    Polished Wood: Inject into flight holes 5-7cm (2-3ins) apart. Flood into joints. Wipe off surplus. In severe cases repeat treatment. Fluid does not penetrate polished surfaces. Wax polished surfaces will normally require re-waxing after treatment.

    Note: The application of this product may cause darkening of some timbers. If colour is critical, try a test area first and allow to dry fully to ensure final appearance is acceptable. After drying, glues, fillers and knotting can be used normally. Bitumen, rubber and some plastic based materials may soften or swell on contact with fluid or solvent vapour.
    Do not spill on asphalt, bitumen, bitumen felt, tar or mastics. Ensure timber is fully dry (allow 6-8 weeks) or use a vapour barrier such as heavy-duty polythene sheets (as used for damp proof membrane) before laying plastic floor tiles, foam or rubber-backed carpet, underlay or hanging vinyl wallpaper.

    Cuprinol Low Odour Woodworm Killer

    Size: 1 Litre.

    PTDCUPWW1L

    Learn More
  2. Cuprinol Low Odour Woodworm Killer 500ml

    SKU: PTDCUPWW500

    £18.16

    Cuprinol Woodworm Killer (WB) kills all types of wood-boring beetle larvae. Its deep penetration ensures effective protection for years to come.

    This low odour, water based formula has been specially developed to make it more pleasant and convenient to use.

    Application:

    Bare Wood: Flood surfaces with 2 or 3 brush coats. Pay particular attention to endgrain, corners, joints, crevices, etc. In severe cases, also inject into flight holes 7-10cm (3-4ins) apart and repeat treatment. Re-treat surfaces cut after treatment.

    Polished Wood: Inject into flight holes 5-7cm (2-3ins) apart. Flood into joints. Wipe off surplus. In severe cases repeat treatment. Fluid does not penetrate polished surfaces. Wax polished surfaces will normally require re-waxing after treatment.

    Note: The application of this product may cause darkening of some timbers. If colour is critical, try a test area first and allow to dry fully to ensure final appearance is acceptable. After drying, glues, fillers and knotting can be used normally. Bitumen, rubber and some plastic based materials may soften or swell on contact with fluid or solvent vapour.
    Do not spill on asphalt, bitumen, bitumen felt, tar or mastics. Ensure timber is fully dry (allow 6-8 weeks) or use a vapour barrier such as heavy-duty polythene sheets (as used for damp proof membrane) before laying plastic floor tiles, foam or rubber-backed carpet, underlay or hanging vinyl wallpaper.

    Cuprinol Low Odour Woodworm Killer

    Size: 500ml.

    PTDCUPWW500

    Learn More
  3. Cuprinol Low Odour Woodworm Killer 5 Litre

    SKU: PTDCUPWW5L

    £66.08

    Cuprinol Woodworm Killer (WB) kills all types of wood-boring beetle larvae. Its deep penetration ensures effective protection for years to come.

    This low odour, water based formula has been specially developed to make it more pleasant and convenient to use.

    Application:

    Bare Wood: Flood surfaces with 2 or 3 brush coats. Pay particular attention to endgrain, corners, joints, crevices, etc. In severe cases, also inject into flight holes 7-10cm (3-4ins) apart and repeat treatment. Re-treat surfaces cut after treatment.

    Polished Wood: Inject into flight holes 5-7cm (2-3ins) apart. Flood into joints. Wipe off surplus. In severe cases repeat treatment. Fluid does not penetrate polished surfaces. Wax polished surfaces will normally require re-waxing after treatment.

    Note: The application of this product may cause darkening of some timbers. If colour is critical, try a test area first and allow to dry fully to ensure final appearance is acceptable. After drying, glues, fillers and knotting can be used normally. Bitumen, rubber and some plastic based materials may soften or swell on contact with fluid or solvent vapour.
    Do not spill on asphalt, bitumen, bitumen felt, tar or mastics. Ensure timber is fully dry (allow 6-8 weeks) or use a vapour barrier such as heavy-duty polythene sheets (as used for damp proof membrane) before laying plastic floor tiles, foam or rubber-backed carpet, underlay or hanging vinyl wallpaper.

    Cuprinol Low Odour Woodworm Killer

    Size: 5 Litre.

    PTDCUPWW5L

    Learn More
  4. Ronseal Woodworm Killer 5 Litre

    SKU: PTDRSLWK5L

    £41.44

    Ronseal Woodworm Killer is specially formulated to kill woodboring beetles, their larvae and eggs. It penetrates deep into the wood, providing years of long-lasting protection.

    Size: 5 Litre.

    PTDRSLWK5L

    Learn More
  5. Everbuild Woodworm Killer 5 Litre

    SKU: PTDEVBLJWORM05

    List Price:  

    £31.45

    Our Price:  

    £24.99

    Inc VAT:  

    £29.99

    Everbuild Woodworm Killer is a ready to use treatment for the eradication of all types and life stages of wood boring insects and their larvae, specifically woodworm. It is a low solvent, low odour solution based on Micro-fine active technology with added insecticide to penetrate deep into the wood to actively kill and protect against re-infestation.

    Woodworm Killer is fast drying and non flammable.

    Size: 5 Litres.

    PTDEVBLJWORM05

    Learn More
  6. Cuprinol Low Odour Woodworm Killer Range

    SKU: PTDGRPCUPWW1L

    From:  

    £15.13

    Inc VAT:  

    £18.16

    Cuprinol Woodworm Killer (WB) kills all types of wood-boring beetle larvae. Its deep penetration ensures effective protection for years to come.

    This low odour, water based formula has been specially developed to make it more pleasant and convenient to use.

    Application:

    Bare Wood: Flood surfaces with 2 or 3 brush coats. Pay particular attention to endgrain, corners, joints, crevices, etc. In severe cases, also inject into flight holes 7-10cm (3-4ins) apart and repeat treatment. Re-treat surfaces cut after treatment.

    Polished Wood: Inject into flight holes 5-7cm (2-3ins) apart. Flood into joints. Wipe off surplus. In severe cases repeat treatment. Fluid does not penetrate polished surfaces. Wax polished surfaces will normally require re-waxing after treatment.

    Note: The application of this product may cause darkening of some timbers. If colour is critical, try a test area first and allow to dry fully to ensure final appearance is acceptable. After drying, glues, fillers and knotting can be used normally. Bitumen, rubber and some plastic based materials may soften or swell on contact with fluid or solvent vapour.
    Do not spill on asphalt, bitumen, bitumen felt, tar or mastics. Ensure timber is fully dry (allow 6-8 weeks) or use a vapour barrier such as heavy-duty polythene sheets (as used for damp proof membrane) before laying plastic floor tiles, foam or rubber-backed carpet, underlay or hanging vinyl wallpaper.

    PTDGRPCUPWW1L

    Learn More
No more product
Woodworm Treatment
© 2020 Power Tools Direct Online Ltd
VAT Number: 100 5143 84