Site Lighting & Portable Lights

This Faithfull inspection lamp features a 50mm wide clamp for clamping to joists, beams, under vehicle bonnets, lofts or almost anywhere. It has strong hand grips, a useful hanging hook for easy storage, and a protective wire cage around the bulb. Supplied with a 5 metre cable, approved plug, and an 800 lumen low energy 10W LED light bulb (equivalent to 60 watt incandescent lightbulb).

Replacement bulb part number:
FPPSLBA6010W - 10W LED E27

PTDGRPFPPSLGRIPLE

This Faithfull inspection lamp features a 50mm wide clamp for clamping to joists, beams, under vehicle bonnets, lofts or almost anywhere. It has strong hand grips, a useful hanging hook for easy storage, and a protective wire cage around the bulb. Supplied with a 5 metre cable, approved plug, and an 800 lumen low energy 10W LED light bulb (equivalent to 60 watt incandescent lightbulb).

Replacement bulb part number:
FPPSLBA6010W - 10W LED E27

The Faithfull FPPSLGRIPLEL heavy-duty low energy inspection lamp has the following specifications:
110 Volt

PTDFPPSLGRIPLEL

The Faithfull Power Plus Task Light is an energy-saving 38W fluorescent light that is cool to the touch. This makes it ideal for plasterers as it provides a wide span of bright light, yet doesnt emit heat in the same way as traditional halogen site lights can, as heat can dry out fresh plaster too quickly, and thus crack it.

The mirror behind the bulb provides a 20% higher light output. This light also has a power take-off point and is fitted with an approved plug, which means that you can link several lights together to illuminate large rooms or corridors, or alternatively, plug a power tool into the back of the light if a socket is not available nearby.

The light has an impact-resistant case and lens, with an integral carrying handle. It is waterproof rated to IP44 and has built-in storage for the cable.

PTDFPPSLTL38IM

The Faithfull COB LED Single Pod Tripod Site Light features a high performance, high output, chip on board (COB) LEDs which provides a bright light with up to a 90% energy saving, compared to the equivalent light output from halogen lighting.

They have been designed for both commercial and domestic use with the added advantage of a low power consumption coupled with a cool running temperature. COB LEDs are maintenance free and more resilient to impact damage that can cause conventional halogen tubes to fail if a light is hit or knocked over.

The lamp head is manufactured from die-cast aluminium, is fully adjustable and mounted on a sturdy telescopic tripod. Two twist grip locks enable the tripod height to be quickly adjusted between 960mm and 1885mm. The tripod also features a quick release system allowing the lamp to be easily detached for use as a single pod light.

The lamp is IP65 rated for water and dust ingress protection and is fitted with an approved BS plug.

Why choose Chip on Board (COB) LED lighting instead of conventional lighting?

Long maintenance free working life of up to 100,000 hours.

Extremely energy efficient operating at 80-90% efficiency.

Highly durable resistance to shock, vibration and external impacts, ideal for outdoor and rugged lighting applications.

Low heat emission provide a safe working area free of the burn risk associated with Halogen lighting products.

LEDs emit virtually no UV radiation making them perfect for use in areas were UV light sensitive objects or materials are present.

LEDs perform well in extremely cold or hot temperatures with no loss of performance making them ideal for use outside in all weathers.

Ecologically friendly LEDs are free of toxic materials and are 100% recyclable.

Faithfull Power Plus COB LED Single Pod Tripod Site Light 2100 Lumen 30 Watt 240 Volt Version.

PTDFPPSLLED30T

The Faithfull COB LED Single Pod Tripod Site Light features a high performance, high output, chip on board (COB) LEDs which provides a bright light with up to a 90% energy saving, compared to the equivalent light output from halogen lighting.

They have been designed for both commercial and domestic use with the added advantage of a low power consumption coupled with a cool running temperature. COB LEDs are maintenance free and more resilient to impact damage that can cause conventional halogen tubes to fail if a light is hit or knocked over.

The lamp head is manufactured from die-cast aluminium, is fully adjustable and mounted on a sturdy telescopic tripod. Two twist grip locks enable the tripod height to be quickly adjusted between 960mm and 1885mm. The tripod also features a quick release system allowing the lamp to be easily detached for use as a single pod light.

The lamp is IP65 rated for water and dust ingress protection and is fitted with an approved BS plug.

Why choose Chip on Board (COB) LED lighting instead of conventional lighting?

Long maintenance free working life of up to 100,000 hours.

Extremely energy efficient operating at 80-90% efficiency.

Highly durable resistance to shock, vibration and external impacts, ideal for outdoor and rugged lighting applications.

Low heat emission provide a safe working area free of the burn risk associated with Halogen lighting products.

LEDs emit virtually no UV radiation making them perfect for use in areas were UV light sensitive objects or materials are present.

LEDs perform well in extremely cold or hot temperatures with no loss of performance making them ideal for use outside in all weathers.

Ecologically friendly LEDs are free of toxic materials and are 100% recyclable.

PTDGRPFPPSLLED30T

The Faithfull Power Plus SMD LED Task Light has a highly efficient 20 Watt SMD (Surface Mounted Diode) LED that provides an extremely bright, glare-free 2,000 lumens of light output and is mounted in a heavy-duty, impact resistant case rated to *IP44/54.

A mirror backed reflector improves the light output and beam spread of the work light, which also has the added benefits of an integrated power take-off socket, allowing the series linking of lamps or for use with power tools*. The lamp has a 3m x 0.75mm cable and a built-in storage system and is fitted with an approved 240 or 110 volt plug.

LED work lights have many uses around the work site or home, providing a glare free bright light that avoids the high heat output associated with halogen bulbs. These lights are cool running and eliminate the fire and burn hazards associated with halogen lighting, which make them ideal for tradesmen who are working close by. They also have the benefit of not drying out plaster or similar finishes too quickly (which can happen with the heat emitted from halogen lights) which can result in cracking.

*110 Volt Version is IP54 Rated, Light Maximum Load: 6.25 amp Current (Max. 1000W), Maximum Link: 15 Lights. Total Socket Load MUST NOT Exceed 1,000 Watt.

*240 Volt Version is IP44 Rated, Light Maximum Load: 6.25 amp Current (Max. 2200W), Maximum Link: 20 Lights. Total Socket Load MUST NOT Exceed 2,200 Watt.

PTDGRPFPPSLTL20

The Faithfull Power Plus LED 900mm Tripod Pole Light has many great features that offer a unique solution to lighting on the move with 336 LEDs that provide 3000 lumens of light to a radius of 360. The lamp is compact, lightweight, portable and is maintenance free with a low power consumption which remains cool to the touch while in use. The pole light features a built-in tripod enabling the lamp to be set up in seconds.

The opal polycarbonate diffuser lens is impact and scratch-resistant, providing a safe glare-free bright light that illuminates the workplace. The addition of a power outlet allows the light to be used in series or in conjunction with a power tool. Fitted with a detachable shoulder strap and 3 metre cable fitted with an approved plug.

Ideal for indoor or outdoor use.

Maximum Power Outlet Load:

240 Volt: 3,000 Watt
110 Volt: 1,760 Watt

Faithfull Power Plus LED 900mm Tripod Pole Light 36W 110V version.

PTDFPPSLLED36UL

The Faithfull Power Plus LED 900mm Tripod Pole Light has many great features that offer a unique solution to lighting on the move with 336 LEDs that provide 3000 lumens of light to a radius of 360. The lamp is compact, lightweight, portable and is maintenance free with a low power consumption which remains cool to the touch while in use. The pole light features a built-in tripod enabling the lamp to be set up in seconds.

The opal polycarbonate diffuser lens is impact and scratch-resistant, providing a safe glare-free bright light that illuminates the workplace. The addition of a power outlet allows the light to be used in series or in conjunction with a power tool. Fitted with a detachable shoulder strap and 3 metre cable fitted with an approved plug.

Ideal for indoor or outdoor use.

Maximum Power Outlet Load:

240 Volt: 3,000 Watt
110 Volt: 1,760 Watt

PTDGRPFPPSLLED36U

The Brennenstuhl 36 Watt Low Energy Jet Light is a robust, compact and -powerful work light. It offers an even distribution of light via the ultra-efficient fluorescent tubes, making it an ideal choice for a variety of tradesmen, particularly plasterers as there is virtually no heat emitted.

It is IP44 rated, can be used in three angled positions, and has a polycarbonate shockproof casing. It also has a 3m long cable.

Specification

Lamp Efficacy: 79 lm/W.
Colour Temperature: 6400 K.
Power: 2 x 36 Watt.
Ballast Efficiency: A3.
Cable Length: 3m.
Cable Type: H05RN-F 3G1,0.
Voltage: 110 Volt.

PTDBRE1172563L

The Brennenstuhl Large Cree (Chip LED) Worklight is ideal for indoor and outdoor use. It is water resistant to IP65. This light offers a mobile, high powered, COB LED light with extra wide light diffusion to illuminate a large area. It uses approximately 80% less energy than conventional light sources and offers an instant bright light.

Low heat generation, no risk of injury. Chip LEDs have an extremely long lifespan, are shockproof and maintenance free. It has a diecast aluminium casing with a stable tubular steel frame and ergonomic plastic handle. The floodlight pivots and locks in place and the front pane is made of safety glass.

Specification

Output: 30 Watt/2,100 Lumens.
Cable: 5 Metres, H07RNF3G1,0.

1 x Brennenstuhl Large Cree (Chip LED) Worklight 240 Volt Version.

PTDBRE253303

The Brennenstuhl Large Cree (Chip LED) Worklight is ideal for indoor and outdoor use. It is water resistant to IP65. This light offers a mobile, high powered, COB LED light with extra wide light diffusion to illuminate a large area. It uses approximately 80% less energy than conventional light sources and offers an instant bright light.

Low heat generation, no risk of injury. Chip LEDs have an extremely long lifespan, are shockproof and maintenance free. It has a diecast aluminium casing with a stable tubular steel frame and ergonomic plastic handle. The floodlight pivots and locks in place and the front pane is made of safety glass.

Specification

Output: 30 Watt/2,100 Lumens.
Cable: 5 Metres, H07RNF3G1,0.

1 x Brennenstuhl Large Cree (Chip LED) Worklight 110 Volt Version.

PTDBRE253313

This Brennenstuhl Gripper Light is a heavy-duty inspection lamp, with a spring-loaded plastic handle that enables you to clamp the light securely. There is also a hanging hook to suspend it from a nail, screw or hook. It comes complete with a glass bulb protector and wire basket.

Specification

Cable: H05VV-F 2x0.75.
Output: 60 Watt.
Fittings: E27.
Plug: BS-plug.
Cable Length: 5m.

PTDGRPBRE1176113

The Brennenstuhl Large Cree (Chip LED) Worklight is ideal for indoor and outdoor use. It is water resistant to IP65. This light offers a mobile, high powered, COB LED light with extra wide light diffusion to illuminate a large area. It uses approximately 80% less energy than conventional light sources and offers an instant bright light.

Low heat generation, no risk of injury. Chip LEDs have an extremely long lifespan, are shockproof and maintenance free. It has a diecast aluminium casing with a stable tubular steel frame and ergonomic plastic handle. The floodlight pivots and locks in place and the front pane is made of safety glass.

Specification

Output: 30 Watt/2,100 Lumens.
Cable: 5 Metres, H07RNF3G1,0.

PTDGRPBRE253303

This Brennenstuhl Gripper Light is a heavy-duty inspection lamp, with a spring-loaded plastic handle that enables you to clamp the light securely. There is also a hanging hook to suspend it from a nail, screw or hook. It comes complete with a glass bulb protector and wire basket.

Specification

Cable: H05VV-F 2x0.75.
Output: 60 Watt.
Fittings: E27.
Plug: BS-plug.
Cable Length: 5m.

Brennenstuhl Gripper Light 110 Volt Version.

PTDBRE1176123L

The Brennenstuhl Small Cree (Chip LED) Worklight is ideal for indoor and outdoor use. It is water resistant to IP65. This light offers a mobile, high powered, COB LED light with extra wide light diffusion to illuminate a large area. It uses approximately 80% less energy than conventional light sources and offers an instant bright light.

Low heat generation, no risk of injury. Chip LEDs have an extremely long lifespan, are shockproof and maintenance free. It has a diecast aluminium casing with a stable tubular steel frame and ergonomic plastic handle. The floodlight pivots and locks in place and the front pane is made of safety glass.

Specification

Output: 10 Watt/700 Lumens.
Cable: 2 Meters, H05RNF3G1,0.

1 x Brennenstuhl Small Large Cree (Chip LED) Worklight 240 Volt Version.

PTDBRE253103