Cable Reels Site Lights & Transformers

The Faithfull Single Tripod Site Light offers excellent illumination to suit both commercial and domestic use. Each lamp is constructed from a die-cast body and is equipped with a metal grille to prevent accidental contact with the hot lens and to protect it against damage.

Mounted on a sturdy telescopic stand that enables the lamp height to be adjusted between 780mm and 1830mm (31in and 72in). The spread of the tripod feet are independently adjustable to suit uneven terrain.

Supplied with C class energy saving halogen tubes which offer a 20% saving on energy. All lamps are fitted with an approved BS plug. Conforms to IP54 for water and dust ingress protection.

PTDGRPFPPSL500CT

The Faithfull range of open drum cable reels come in a choice of 25m or 50m cable lengths (1.5mm diameter cable) plus a 25m heavy-duty (2.5mm diameter cable) version for larger site applications - all of which are fitted with thermal overload protection and are manufactured to British Standard BS EN 61242

All reels feature a sturdy steel frame construction with carry handle for easy movement around the worksite.

They are fitted with 2 outlet sockets to run 1 or more power tools etc, the sockets are protected with spring loaded flaps to keep unwanted debris out when not in use and a winding knob for easy and tangle free reel-in.

NOTE: All cable reels should be fully unwound before they are used to carry their recommended maximum load.

PTDGRPFPPCR50ML

The Faithfull 240 volt open drum cable reels have a heavy-duty plastic drum on a sturdy steel frame with carry handle and a thermal overload protection system to prevent overheating damaging the cable. They are fitted with twin 240 volt sockets and the 1.25mm cable is with fitted with a standard 240 volt plug.

When using a 240v cable reel outdoors, or in the vicinity of a machine with mechanism which could damage the cable, it is recommended that an RCD device (FPP RCD) is used at the power source in conjunction with the reel.

Always check that the power supply matches the voltage on the reels rating plate. Never attempt to connect a 240 volt appliance to a 110 volt supply and vice versa. If you need to use a cable reel, select one suitable for the power input of the appliance.

Complies to BS EN 61242.

NOTE: All cable reels should be fully unwound before they are used to carry their recommended maximum load.

PTDGRPFPPCR25M

Three heavy-duty 14 meter 110V trailing leads available in 1.5mm or 2.5mm cable and 16 or 32 amp versions. All leads are fitted with an industrial plug and socket to BSEN60309 providing ingress protection to IP44 and added durability and protection from being dropped or dragged around. Trailing leads are ideal for use with transformers, site lights and power tools to extend their working range.

110V
Length: 14m

PTDGRPFPPTL14M

110 Volt replacement plugs for use with 14mm trailing leads.

Voltage: 110v.
Type: BS EN 60309 Plug.

Ingress Protection: IP44.

PTDGRPFPPPLUG110

Replacement halogen tubes - Class C tubes provide a 20% energy saving.

PTDGRPFPPSLT150WC

The Faithfull Heavy-Duty Task Light features a fluorescent tube mounted in an impact resistant waterproof case rated to IP44 for water and dust ingress protection.

They are popular with a large number of tradesmen, especially plasterers as they emit very little heat. It also has two built-in power outlets for in-series linking. The lamp can be used free standing, hung or fixed to a surface using the holes provided in the fold out handle.

Features a 3 metre cable with built-in storage and an approved 240 or 110 volt plug.

PTDGRPFPPSLTL55W

This heavy-duty inspection lamp features a two-inch wide clamp with hand grips, a useful hanging hook and protective wire cage around the bulb, 5 metres of cable fitted with an approved plug and includes a low energy 13watt 3U light bulb (equivalent to 60 watts).

Replacement lamp part numbers

240V requires a FPPSLB3U, 110V requires a FPPSLB3UL 240V

PTDGRPFPPSLGRIPLE

Sockets for use with 110 volt trailing leads. With a weatherproof, hinged protection flap and brass connectors.

Voltage: 110 Volt, conforms to IP44 for water and dust ingress protection.

Manufactured to BS EN 60309.

Amps: 16 amps or 32 amps.

PTDGRPFPPSOC32AMP

A robust semi-enclosed easyreel that accurately guides the cable onto and off the drum and ensures that the cable is protected while in storage or transit but also safe while in use, using a thermal overload protection system to prevent overheating damaging the cable. The cable reel features four shuttered plug sockets, a BS approved plug and a carry handle with a rotating winding knob making it easy to wind and to use. A flat base keeps the reel upright for easy storage and protects the sockets from contact with wet or damp areas. Manufactured to Kitemark KM61209

NOTE: All cable reels should be fully unwound before they are used to carry their recommended maximum load.

PTDGRPFPPCR10M10A

This Faithfull FPPSLTL38WML Task Light is a powerful worklight, with a 38 watt fluorescent tube mounted in an impact resistant waterproof case rated to IP44. The task light also features a 3 metre cable with built-in storage and fitted with an approved 240 or 110 volt plug. In addition, the mirror back provides 20% more light.

This fluorescent light has many uses around the work site or home, providing a glare-free bright light that avoids the high heat output associated with halogen bulbs. These lights are cool running and eliminate the fire and burn hazards associated with halogen site lighting.

PTDGRPFPPSLTL38WM

The Faithfull COB LED Tripod Site Light features a high performance, high output, chip on board (COB) LEDs which provides a bright light with up to a 90% energy saving, compared to the equivalent light output from halogen lighting.

They have been designed for both commercial and domestic use with the added advantage of a low power consumption coupled with a cool running temperature. COB LEDs are maintenance free and more resilient to impact damage that can cause conventional halogen tubes to fail if a light is hit or knocked over.

The lamp head is manufactured from die-cast aluminium, is fully adjustable and mounted on a sturdy telescopic tripod. Two twist grip locks enable the tripod height to be quickly adjusted between 725mm and 1415mm.

The lamp is IP65 rated for water and dust ingress protection and is fitted with an approved BS plug.

Why choose Chip on Board (COB) LED lighting instead of conventional lighting?

Extremely energy efficient operating at 80-90% efficiency.

Highly durable resistance to shock, vibration and external impacts, ideal for outdoor and rugged lighting applications.

LEDs emit virtually no UV radiation making them perfect for use in areas were UV light sensitive objects or materials are present.

LEDs perform well in extremely cold or hot temperatures with no loss of performance making them ideal for use outside in all weathers.

Ecologically friendly LEDs are free of toxic materials and are 100% recyclable.

PTDGRPFPPSLLED20T

SMJs range of Extension Leads that are ideal for indoor use and provide power where you need it. Fitted with a 13 Amp plug, they have a maximum working load of 3,120 Watt.

Designed to fully comply with the latest British Standards and Electrical Equipment Safety Regulations.

Available as 1-way, 2-way, 4-way and 6-way.
Current: 13 amp.

PTDGRPSMJF2W5MP

SMJ Fused Plug 13 Amp is designed for rough conditions and conforms to the latest standards of BS 1363/A for heavy use. It is fitted with a BS1362 fuse.

PTDGRPSMJTB13FP

The SMJ White Rubber Trailing Socket conforms to the latest standards of BS 1363/A for heavy use and is rated at 13Amps. It is also fitted with a cable clamp.

PTDGRPSMJRTS1GW