Metal Grinding Discs

Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

SAFETY TIPS

Read the manufacturers instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

1 x Faithfull Depressed Centre Metal Grinding Disc 100 x 5 x 16mm

PTDFAI1005MDG

Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

SAFETY TIPS

Read the manufacturers instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

1 x Faithfull Depressed Centre Metal Grinding Disc 180 x 6.5 x 22.23mm

PTDFAI1806MDG

Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

SAFETY TIPS

Read the manufacturers instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

1 x Faithfull Depressed Centre Metal Grinding Disc 115 x 6.5 x 22.23mm

PTDFAI1156MDG

Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

SAFETY TIPS

Read the manufacturers instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

1 x Faithfull Depressed Centre Metal Grinding Disc 100 x 6.5 x 16mm

PTDFAI1006MDG

Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

SAFETY TIPS

Read the manufacturers instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

1 x Faithfull Depressed Centre Metal Grinding Disc 230 x 6.4 x 22.23mm

PTDFAI2306MDG

Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

SAFETY TIPS

Read the manufacturers instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

1 x Faithfull Depressed Centre Metal Grinding Disc 125 x 6.5 x 22.23mm

PTDFAI1256MDG

The DEWALT FlexVolt XR Metal Grinding Disc has been specially designed to work in conjunction with the DCG414 XR FlexVolt Grinder 54 Volt. It has an INOX coating that offers up to 39% more cuts and removes up to 53% more material compared to previous DEWALT discs.

Diameter: 125mm.
Max RPM: 12,500/min.

PTDGRPDEWDT99580QZ

Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

SAFETY TIPS

Read the manufacturers instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

PTDGRPFAI1005MDG

The DEWALT FlexVolt XR Metal Grinding Disc has been specially designed to work in conjunction with the DCG414 XR FlexVolt Grinder 54 Volt. It has an INOX coating that offers up to 39% more cuts and removes up to 53% more material compared to previous DEWALT discs.

Diameter: 125mm.
Max RPM: 12,500/min.

This DEWALT FlexVolt XR Metal Grinding Disc has the following specification:

Diameter: 125mm.
Max RPM: 12,500/min.
Thickness: 3mm.
Bore: 22.23mm.

PTDDEWDT99581QZ

Bosch X-LOCK Expert for Metal Depressed Centre Grinding Disc is efficient and consistently delivers accurate results in steel and ferrous metal. The X-LOCK locking system provides quick and safe blade changes. Designed with professional tradesmen and DIY enthusiasts in mind.

Compatible with Bosch X-LOCK machines and standard angle grinders.

This Bosch X-LOCK Expert for Metal Grinding Disc has the following specification:

Diameter: 115mm
Thickness: 6mm
Bore Diameter: 22.23mm

PTDBSH619258

Bosch X-LOCK Expert for Metal Depressed Centre Grinding Disc is efficient and consistently delivers accurate results in steel and ferrous metal. The X-LOCK locking system provides quick and safe blade changes. Designed with professional tradesmen and DIY enthusiasts in mind.

Compatible with Bosch X-LOCK machines and standard angle grinders.

This Bosch X-LOCK Expert for Metal Grinding Disc has the following specification:

Diameter: 125mm
Thickness: 6mm
Bore Diameter: 22.23mm

PTDBSH619259

Bosch X-LOCK Expert for Metal Depressed Centre Grinding Disc is efficient and consistently delivers accurate results in steel and ferrous metal. The X-LOCK locking system provides quick and safe blade changes. Designed with professional tradesmen and DIY enthusiasts in mind.

Compatible with Bosch X-LOCK machines and standard angle grinders.

PTDGRPBSH619258