Everbuild External Frame Sealant White 290ml

An acrylic-based product, Everbuild External Frame Sealant works well both inside and outside around door and window frames. With this solution, almost any material can be strongly adhered to and a permanently flexible seal guaranteed. this product can be overpainted after it has set and contains a strong anti-fungicide to stop mould growth.

BENEFITS:

• Always adaptable Good stickiness on most surfaces.
• Easy cleanup; overpaintable; resistant to mould.

APPLICATION INSTRUCTIONS: Preparing the Substrate: Make sure every surface is free of dust, dirt, and loose debris. Prime very porous surfaces using Everbuild PVA bond diluted with water. Application technique instrumentation apply the sealant with a regular sealant gun after cutting the cartridge tip and attaching the nozzle. Twenty minutes later, use a moistened instrument to smooth the sealant. Do not wet the surface to avoid drying delays. Tools should be cleaned by wiping off any extra sealant with a sponge and warm water.

ADDITIONAL INFORMATION:

• Not appropriate for use with asphalt or bitumen.
• Do not use externally if rain is predicted in six hours at 20 degrees celsius or in twenty-four hours at 10 degrees celsius.
• Once cured, do not abrade; wait to overpaint until a surface skin has developed. Your go-to choice for all framing and sealing needs, this versatile and trustworthy product embodies the strong performance of Everbuild External Frame Sealant.

PTDEVBEXTGR