Drill Bits

The Irwin Masonry drills bits are designed for fast and efficient drilling in brickwork, concrete and breeze block, especially with cordless drills. They drill up to 60% faster than competitive drill bits whilst maintaining the same high durability.

The single flute design ensures faster dust removal for increased drilling speed, with the unique, pressed diamond-ground carbide tip allows for aggressive cutting and the carbide tip design also ensures 20% longer life compared to previous Irwin masonry drill bits. The bits are made with a chrome vanadium body with high carbon content which allows more hardening and a stronger bit for maximum rupture strength.

PTDGRPIRW10501893

The Irwin Cordless Multi-Purpose Drill Bits have been designed for cordless low /min multi-purpose drilling. In tests they produced between 90-129% more holes per battery charge than leading competitors.

They have a four-facet ground carbide tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork: the Cordless Drillbit is excellent for such drilling jobs - where you drill through wood into brickwork.

Only one drillbit is needed to do the job and will drill a wide selection of different materials like: Brickwork, Ceramic Tiles, Breeze Block, Wood, Dry Wall, Gypsum Board, Limestone, Slate, Marble, Eternite and Plastics/Reinforced plastics.

PTDGRPIRW10501939

Milwaukee SDS Plus Drill Bits 2 Cut offer the maximum in drilling speed and durability. They have a dynamic, chisel-shaped drill head that ensures swift penetration and optimal material removal.

They have a tough carbide tip held by high strength brazing that offers an unrivalled durability even in steel reinforced concrete. They also have a unique 2-flute design which reduces vibrations and transfers the energy directly to the bit tip.

Available in a range of sizes.

PTDGRPMIL2307067

The Irwin Metric HSS Cobalt Drill Bits are perfect for drilling stainless steel and other high alloys. Their 135 split point grinding ensures perfect centring and reduced drilling pressure. An industrial quality ground flute ensures high accuracy drilling and fast removal of chips.

The drill bit body is manufactured from high quality HSS steel containing 5% Cobalt (Co). The added 5% Cobalt improves the red hardness (heat resistance) of the drill bit and results in significantly extended life. It has an attractive golden tempered surface finish.

PTDGRPIRW10502507

The Dormer A002 Metric HSS-TiN Coated Jobber Drill Bits in Pouch Packs. Each bit has a pointed web and fluted tip design. The point design allows for efficient cutting, with a reduced axial force and allows for accurate centring. The web design provides optimised strength, rigidity and improves the feed of the drilling bit. The flutes allows for efficient chip form and evacuation.

The bits have visible, tool in-situ marking that allows for easy identification. The optimised helix angle provides greater stiffness across the diameter range. The bright body improves cutting performance on ductile materials, and the Titanium Nitride coating resists flank and crater wear, and has low friction that allows for increased cutting speeds.

PTDGRPDORA002S20

Each Dormer A002 HSS-TiN Coated Jobber Drill in pouch pack has a pointed web and fluted tip design. The point design allows for efficient cutting, with a reduced axial force and allows for accurate centring. The web design provides optimised strength, rigidity and improves the feed of the drilling bit. The flutes allows for efficient chip form and evacuation.

The bits have visible, tool in-situ marking that allows for easy identification. The optimised helix angle provides greater stiffness across the diameter range. The bright body improves cutting performance on ductile materials, and the Titanium Nitride coating resists flank and crater wear, and has low friction that allows for increased cutting speeds.

PTDGRPDORA002S18

The Irwin HSS Pro Drillbits are made from high performance, high speed steel. They have an 118 split point shape for increased performance and very good centring. The drillbits ensure precision starting, with no need to pre-punch or pilot drill. They penetrate the material quickly, requiring little effort and feed pressure.

Manufactured to DIN 338 standards. DIN 338 drillbits are suitable for many trade and industrial applications in alloyed and un-alloyed steel, non-ferrous metal, cast iron and plastics.

PTDGRPIRW10502401

Faithfull HSS Professional Blacksmiths M2 Drill Bits are milled bits manufactured from M2 HSS with a bright finish and a reduced 12.7mm shank. Overall length 150mm. Ideal for general purpose use in metal and wood, for use in bench or hand held equipment with a 13mm chuck capacity.

Suitable for use in: alloy steels, carbon steels, cast iron, hardened alloy steels and stainless steels.

PTDGRPFAIBD14PRO

The Faithfull Hinge Boring Bit with a Tungsten Carbide cutter is designed for repetitive drilling of blind holes when fitting concealed (blum) hinges in kitchen, bedroom and bathroom cabinet doors. They are suitable for use on all natural woods and man-made materials such as block board, melamine faced boards, chipboard and MDF and provide a long working life.

These bits should always be used with a stand-mounted drill.

Features:

Solid carbide tipped centre point
Solid carbide main cutter
Relief angle to reduce drag
5/16in - 8mm shank

PTDGRPFAIHBB26

Bahco 9526 Combination Auger Bits are dual-purpose and can be used in both electric power drills and hand braces. With a single cutting edge for easy regrinding, though the need for regrinding is reduced as it is made from hardened tool steel for a longer cutting life.

The threaded tip moderates a self-feed when using a power drill, but still sufficient self-feed when used in a hand brace. For quick precision cutting with all types of wood.

PTDGRPBAH95266