Hammers

Faithfull Sledge Hammer for general use, ideal for builders and contractors. Both striking faces are precision ground, specially hardened and heat treated to withstand the highest impact applications. Virtually unbreakable fibreglass shaft with a soft-grip, non-slip handle and overstrike protection.

Manufactured in accordance with BS 876.

Weight: 4530g (10 lb)

PTDFAIFG10

Faithfull Sledge Hammer for general use, ideal for builders and contractors. Both striking faces are precision ground, specially hardened and heat treated to withstand the highest impact applications. Virtually unbreakable fibreglass shaft with a soft-grip, non-slip handle and overstrike protection.

Manufactured in accordance with BS 876.

Weight: 6350g (14 lb)

PTDFAIFG14

Roughneck Non-Marking White Rubber Mallet has a single piece rubber head with a steel and soft grip handle. For general industrial use, these semi-hard rubber mallets give a gentle but firm blow with little rebound, ideal for use under damp conditions or outdoors.

These rubber mallets will not discolour or leave marks on work surfaces. Used as a general-purpose mallet in automotive, industrial, brewery, DIY and camping, garden landscape or work site application when hard materials need to be layed like concrete slabs, patios etc.

The Roughneck ROU61216 450g (16oz) rubber mallet has a medium
hard rubber head, soft grip handle and a strong steel shaft, this is all
moulded together to make a one piece tool.

PTDROU61216

Roughneck Non-Marking White Rubber Mallet has a single piece rubber head with a steel and soft grip handle. For general industrial use, these semi-hard rubber mallets give a gentle but firm blow with little rebound, ideal for use under damp conditions or outdoors.

These rubber mallets will not discolour or leave marks on work surfaces. Used as a general-purpose mallet in automotive, industrial, brewery, DIY and camping, garden landscape or work site application when hard materials need to be layed like concrete slabs, patios etc.

The Roughneck 680g (24oz) rubber mallet has a medium hard
rubber head, soft grip handle and a strong steel shaft, that is
moulded together to make a one piece tool.

PTDROU61224

Roughneck Double Ended Scutch Hammer which is ideal for all types of stone dressing. They are used for preparation of surface prior to rendering. The double ends make it ideal to have two sized scutch combs attached for different work surfaces.

Unique treble injected TPR soft-grip handle for comfort during use and for reduced fatigue.

PTDROU61720

Roughneck Slaters Hammer has a pointed pick at one end for making holes in slates and a claw in the centre of the head for pulling nails. On the opposing end is a rectangular striking head for tile fixing.

The hammer head is constructed as a one piece with steel handle, and the hammer has a comfortable non-slip rubber grip.

Weight: 454g (16oz).

PTDROU61800

Olympia Tools Rubber Mallet has a solid rubber head with wooden shaft.

For general use where marking of surfaces is not critical.

PTDOLY61124

Olympia Tools Rubber Mallet has a solid rubber head with wooden shaft.

For general use where marking of surfaces is not critical.

PTDOLY61132

The T-Block Combi Hammer is an ergonomically designed hammer that increases precision and reduces strain. The head is filled with small steel bearings to cushion the shock and reduce recoil, the shaft is made from steel with an ergonomically designed rubber grip. The counterweight in the handle impedes rotation, thus improving balance and control of the hammer.

1 x Hultafors Small T-Block Combi Deadblow Hammer 238g (0.5lb)

PTDHULC250S

The T-Block Combi Hammer is an ergonomically designed hammer that increases precision and reduces strain. The head is filled with small steel bearings to cushion the shock and reduce recoil, the shaft is made from steel with an ergonomically designed rubber grip. The counterweight in the handle impedes rotation, thus improving balance and control of the hammer.

1 x Hultafors Medium T-Block Combi Deadblow Hammer 350g (0.7lb)

PTDHULC375M

The Electricians hammer is a versatile hammer with a U-shaped striking face ideal for working in confined spaces.

The U-shape makes it possible to work close to ceilings and corners without leaving marks on surrounding surfaces while the straight claw makes it easy to get at and remove nails and clamps in confined places. Ergonomically designed handle for a good grip along the entire handle, regardless of power or precision.

Weight: 550g.

PTDHULEL

The T block ball pein hammer is an ergonomically designed hammer that increases precision and reduces strain. The head is filled with small steel bearings to cushion the shock and reduce recoil. The counterweight in the handle impedes rotation, thus improving balance and control of the hammer.

1 x Hultafors T Block Ball Pein Hammer Medium

PTDHULK375M

The T block ball pein hammer is an ergonomically designed hammer that increases precision and reduces strain. The head is filled with small steel bearings to cushion the shock and reduce recoil. The counterweight in the handle impedes rotation, thus improving balance and control of the hammer.

1 x Hultafors T Block Ball Pein Hammer Large

PTDHULK600L

The T-Block Combi Hammer is an ergonomically designed hammer that increases precision and reduces strain. The head is filled with small steel bearings to cushion the shock and reduce recoil, the shaft is made from steel with an ergonomically designed rubber grip. The counterweight in the handle impedes rotation, thus improving balance and control of the hammer.

PTDGRPHULC250S

The T block ball pein hammer is an ergonomically designed hammer that increases precision and reduces strain. The head is filled with small steel bearings to cushion the shock and reduce recoil. The counterweight in the handle impedes rotation, thus improving balance and control of the hammer.

PTDGRPHULK250S