Padlocks Door Locks & Security

UNIONs basic range of ESSENTIAL products are uncomplicated products which provide true value for money without compromising everyday performance and quality.

The ESSENTIAL Tubular Latch is a universal latch with two way action. The latch bolt can be withdrawn by a sprung lever handle from either side. It has a single piece, square forend with matching strike.

The latch is made from nylon for a quieter closing action.

Finish: Zinc plated.
Case size: 65mm (2.5 inch).
Backset: 45mm.

PTDUNNY2600ZP25

The Faithfull Shutter Padlocks can be used in a variety of situations and are ideal for security shutters, gates and bollards.

The padlock has a brass body with stainless steel armoured casing. Its rotating shackle is made from hardened steel. It has a 6-pin security cylinder. This padlock is key retaining, meaning the key can only be removed when in the locked position. The shackle springs open when unlocked.

Supplied complete with 3 keys.

The Faithfull FAIPLB60SHUT 60mm Shutter Padlock has the following specifications:

Body dimensions:
Height: 52mm.
Width: 60mm.
Depth: 18mm.

Shackle dimensions:
Diameter: 9mm.
Clearance: 15mm.

PTDFAIPLB60SHUT

The Faithfull Shutter Padlocks can be used in a variety of situations and are ideal for security shutters, gates and bollards.

The padlock has a brass body with stainless steel armoured casing. Its rotating shackle is made from hardened steel. It has a 6-pin security cylinder. This padlock is key retaining, meaning the key can only be removed when in the locked position. The shackle springs open when unlocked.

Supplied complete with 3 keys.

The Faithfull FAIPLB80SHUT Shutter Padlock has the following specifications:

Body dimensions:
Height: 66mm.
Width: 80mm.
Depth: 22mm.

Shackle dimensions:
Diameter: 12mm.
Clearance: 35 x 22mm.

PTDFAIPLB80SHUT

The Faithfull Shutter Padlocks can be used in a variety of situations and are ideal for security shutters, gates and bollards.

The padlock has a brass body with stainless steel armoured casing. Its rotating shackle is made from hardened steel. It has a 6-pin security cylinder. This padlock is key retaining, meaning the key can only be removed when in the locked position. The shackle springs open when unlocked.

Supplied complete with 3 keys.

PTDGRPFAIPLB60SHUT

Unions StrongBOLT 3 Lever Mortice Sashlocks feature an innovative, easily reversible radius latch that uses the Union SwitchLatch technology, meaning that no tools are required. This is both simple to use and time-saving. An anti-rattle adjustable strike allows on-site fine tuning.

The sashlocks have a plastic splinter guard and a radius inner forend for ease of installation. They can be installed in the many UK mortices without the need for additional carpentry or spoiling the edge of the door.

The chamfered bolt design increases the performance of the lock under side load testing and also makes drilling attack more difficult. Anti-pick and keyhole protection prevents forced entry by picking, and the hardened steel pins provide resistance to attack from sawing.

The deadbolt can be locked or unlocked by the key from either side. This deadbolt measures 14mm for secure positive deadlocking and additional resistance against attack.

2203S can be keyed alike with 2103S.

Forend finish: Stainless steel.
Case size: 68 x 109.6mm.
Backset: 45mm. This is the measurement from the edge of the door to the centre of the keyhole.
Centre: 57mm. This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole.

PTDUNNY2203SS25

Unions StrongBOLT 3 Lever Mortice Sashlocks feature an innovative, easily reversible radius latch that uses the Union SwitchLatch technology, meaning that no tools are required. This is both simple to use and time-saving. An anti-rattle adjustable strike allows on-site fine tuning.

The sashlocks have a plastic splinter guard and a radius inner forend for ease of installation. They can be installed in the many UK mortices without the need for additional carpentry or spoiling the edge of the door.

The chamfered bolt design increases the performance of the lock under side load testing and also makes drilling attack more difficult. Anti-pick and keyhole protection prevents forced entry by picking, and the hardened steel pins provide resistance to attack from sawing.

The deadbolt can be locked or unlocked by the key from either side. This deadbolt measures 14mm for secure positive deadlocking and additional resistance against attack.

2203S can be keyed alike with 2103S.

Forend finish: Stainless steel.
Case size: 81 x 109.6mm.
Backset: 57mm. This is the measurement from the edge of the door to the centre of the keyhole.
Centre: 57mm. This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole.

PTDUNNY2203SS30

The Union StrongBOLT Mortice Bathroom Locks feature an easily reversible radius latch that uses the unique UNION SwitchLatch technology, meaning that the latch can be reversed without the need for tools. The anti-rattle adjustable strike enables on site fine tuning. The plastic splinter guard and radius inner forend allows easy installation and a professional finish.

The lock has a chamfered bolt design to increase its performance under side load testing and makes drilling attack more difficult. Anti-pick and keyhole protection prevents forced entry by picking, and hardened steel pins provide resistance to attack from sawing.

The 14mm deadbolt provides secure positive deadlocking and additional resistance against attack. It can be locked or unlocked by the cylinder from either side

The Union Mortice Bathroom locks can be installed in the many UK mortices without the need for additional carpentry or spoiling the edge of the door.

Forend finish: Stainless steel.
Case size: 68 x 109.6mm.
Backset: 45mm. This is the measurement from the edge of the door to the centre of the keyhole.
Centre: 57mm. This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole.

PTDUNNY22WCSS25

The Union StrongBOLT Mortice Bathroom Locks feature an easily reversible radius latch that uses the unique UNION SwitchLatch technology, meaning that the latch can be reversed without the need for tools. The anti-rattle adjustable strike enables on site fine tuning. The plastic splinter guard and radius inner forend allows easy installation and a professional finish.

The lock has a chamfered bolt design to increase its performance under side load testing and makes drilling attack more difficult. Anti-pick and keyhole protection prevents forced entry by picking, and hardened steel pins provide resistance to attack from sawing.

The 14mm deadbolt provides secure positive deadlocking and additional resistance against attack. It can be locked or unlocked by the cylinder from either side

The Union Mortice Bathroom locks can be installed in the many UK mortices without the need for additional carpentry or spoiling the edge of the door.

Forend finish: Stainless steel.
Case size: 81 x 109.6mm.
Backset: 57mm. This is the measurement from the edge of the door to the centre of the keyhole.
Centre: 57mm. This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole.

PTDUNNY22WCSS30

This Forge internal Door Bolt can be used for securing doors or cupboards.

Supplied with screws and fitting instructions.

Fitting Instructions:
1. Position door bolt on the door face so that the end of the door bolt is in line with the door edge and mark the screw holes with a pencil.
2. Drill pilot holes using a 2mm drill bit and fasten in place using supplied screws.
3. If being installed on an inward opening door:- Position the bolt keep onto the door frame and ensure that the bolt moves freely through the hole. It may be necessary to remove part of the frame with a chisel.

Made from solid brass and lacquered for a long lasting finish.

Finish: Chrome.
Size: 150mm (6 inch).

PTDFGEDBLTCH6

This Forge Door Bolt is heavy-duty and yet still decorative. It is made from solid brass and laquered to prevent discolouration during use.

Ideal for internal doors and for use as secondary security.

Supplied with screws and fitting instructions.

Fitting Instructions:
1. Postion door bolt on the door face so that the end of the doorbolt is in line with the door edge and mark the screwholes with a pencil.
2. Drill pilot holes using a 2mm drillbit and fasten in place using supplied screws.
3. If being installed on an inward opening door:- Position the bolt keep onto the door frame, and ensure that the bolt moves freely through the hole. it may be necessary to remove part of the frame with a chisel.

Finish: Brass.
Size: 150mm (6 inch).

PTDFGEDBLTHVBR6

Forge stainless steel handle designed for use in commercial and industrial applications. The return to door lever design reduces the likelyhood of loose clothing being caught on the handle. Supplied with matching chrome finish tubular door latch and 75mm butt hinges.

Internal door pack with all the ironmongery needed to hang and furnish a door. Supplied with two handles, a 2.5in tubular mortice latch and two 75mm butt hinges. Ideal for doors of 35mm thickness 10-15kg.

Supplied with screws and fitting instructions.

PTDFGEDPCKSSRTD

Forge Internal Door Packs with all the ironmongery needed to hang and furnish a door. Supplied with two latch handles, a 2.1/2in tubular mortice latch and two 75mm butt hinges. Ideal for doors of 35mm thickness 10-15kg.

Fitting Instructions: To Fit Door Handles:-
1. Measure the thickness of the door and cut the square spindle bar 60mm longer than this thickness.
2. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensure the handle is square, screw hole positions with a bradawl.
3. Drill 2mm pilot holes and reposition the handle before securing using the wood screws provided.

The satin chrome finish short back plate handle has a straight lever for a modern contemporary look. Supplied with matching satin chrome finish hinges and tubular latch.

PTDFGEDPCKVSTSC

Forge aluminium value door handles. Sprung lever on backplate.

Fixings included.

Fitting Instructions:
1. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensuring the handle is square, mark the screw hole positions with a bradawl.
2. Drill 2mm pilot holes and reposition the handle before securing using the wood screws provided.

Designed to be used with a mortice bathroom lock with centres of 57mm. The thumbturn includes emergency access from the shut side with a coin or screwdriver.

PTDFGEHBATECOAL

This Forge classic Backplate Handle has a straight lever design. The sprung handle has a lasting finish and is lacquered to prevent discolouration during use.

They are ideal for internal or external use as the handles have been tested for corrosion resistance and cycle tested beyond 120,000 uses.

Supplied with screws and fitting instructions.

Fitting Instructions:
1. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensuring the handle is square, mark the screw hole positions with a bradawl.
2. Drill 2mm Pilot holes and reposition the handle before securing using the wood screws provided.
3. If fitting Bathroom handles, now insert the bathroom spindle bar through the deadbolt hole of the lock from the outside of the door and place the thumbturn onto the spindle bar. Tighten the grubscrew on the underside with the hex key provided.

Designed to be used with a mortice bathroom lock with centres of 57mm. The thumbturn includes emergency access from the shut side with a coin or screwdriver.

Backplate Size: 150 x 39mm.

PTDFGEHBATVSTCH

The Forge range of Gable Handles incorporates a traditional backplate style with a scroll handle. The sprung handles have a lasting finish. They are ideal for internal or external use as the handles have been tested for corrosion resistance and cycle tested beyond 100,000 uses.

Supplied with screws and fitting instructions.

Product Dimensions:
Backplate: 170 x 42mm.
Handle: 55 x 93mm.

Fitting Instructions:
1. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensuring the handle is square, mark the screw hole positions with a bradawl.
2. Drill 2mm pilot holes and reposition the handle before securing using the wood screws provided.
3. If fitting Bathroom handles, now insert the bathroom spindle bar through the deadbolt hole of the lock from the outside of the door and place the thumbturn onto the spindle bar. Tighten the grubscrew on the underside with the hex key provided.

Designed to be used with any tubular mortice latch.

Finish: Chrome.

PTDFGEHLATGABCH