Bolsters Cold Chisels & Scutch Chisels

Forged from quality chrome vanadium steel for increased strength and durability. The blade holds its edge longer and therefore needs less sharpening. Less grinding equals longer life. Hardened, quenched and tempered to precise specifications for added safety. Modified parabolic striking end for greater resistance to mushrooming and chipping.
Bi-Material hand guard for increased comfort and protection from over strike.

Size: 100mm (4 in).

PTDSTA418328

Quality chrome vanadium steel, increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, brass, bronze, copper and aluminium to cutting bolts, nuts and rivets. Quenched and tempered to precise specifications for added safety.

Size: 140 x 10mm (5 1/2 x 3/8 in).

PTDSTA418286

Faithfull Scutch Combs are designed to fit into a scutch comb holder when preparing stone and masonry etc. The size of the scutch comb must be the same width as the comb holder being used.

Can also be used in scutch hammers.

The Faithfull FAISC112N Scutch Combs come in a pack of 5 and have the following dimensions:

Size: 38mm (1.1/2in)

PTDFAISC112N

Faithfull Scutch Chisel Bits are used in scutch comb holders when cutting and chipping masonry or brickwork. Made from high-carbon tool steel, these chisel bits are sometimes described as droves.

Can also be used in scutch hammers.

PTDGRPFAICB1N

Used by carpenters, electricians and plumbers for lifting floorboards or channelling recesses in solid floors. The chisel is forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening. Hardened, quenched and tempered to precise specifications for added safety.Modified parabolic striking end for greater resistance to mushrooming and chipping.
BI-Material handguard for increased comfort and protection from overstrike.
Size: 280 x 75mm (11 x 3 in).

PTDSTA418331

Quality chrome vanadium steel, increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, brass, bronze, copper and aluminium to cutting bolts, nuts and rivets. Quenched and tempered to precise specifications for added safety.

Size: 300 x 25mm (12 x 1 in).

PTDSTA418332

3 piece Cold Chisel set is a top quality set made from chrome vanadium steel for increased strength and durability. For cutting and shaping wrought iron, cast iron, steel, brass, bronze, copper and aluminium and for cutting bolts, nuts and rivets.

Contains 1 of each: 140 x 10mm (5.1/2 x 3/8in), 150 x 13mm (6 x 1/2in) and 170 x 16mm (6.3/4 x 5/8in).

PTDSTA418298

Forged from quality chrome vanadium steel for increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, brass, bronze, copper and aluminium to cutting bolts, nuts and rivets. Quenched and tempered to precise specifications for added safety.
Size: 300 x 32mm (12 x 1 1/4 in).

PTDSTA418292

These Faithfull chisels are suited to cutting bricks during building work.
This chisel has a suitably hardened cutting edge, but should not be used on concrete containing reinforcing bars.

PTDGRPFAIBB3

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges.

For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60.

Manufactured to BS 3066.

PTDGRPFAI414

The Faithfull flooring chisels are designed for cutting the tongue in laid tongued and grooved floorboarding in order to remove part of the board. They have a hardened and tempered cutting edge.

NOT TO BE USED FOR CUTTING BRICKS

PTDGRPFAIEC214

The Faithfull flooring chisels are designed for cutting the tongue in laid tongued and grooved floorboarding in order to remove part of the board. They have a hardened and tempered cutting edge.

NOT TO BE USED FOR CUTTING BRICKS

The Faithfull FAIEC214PG Flooring chisel is fitted with a sturdy rubber safety grip and has the following dimensions:
Size: 230 x 57mm (9 x 2.1/4 inch).

NOT TO BE USED FOR CUTTING BRICKS

PTDFAIEC214PG

The Faithfull Fluted Plugging Chisel has been designed to remove mortar from between bricks prior to re-pointing or the removal of a brick.
The cutting edge is wider than the blade to give clearance, and the flute allows faster clearance of debris.
Size: 230 x 5mm (9 x 3/16in).

PTDFAIFPC

For detachable stone dressing combs which are used for preparation of surface prior to re-rendering.

PTDGRPFAISCH1

For detachable stone dressing combs which are used for preparation of surface prior to re-rendering.

Size: 200 x 25mm (8 x 1 in).

PTDFAISCH1