Plasterers & Dry Lining Tools

M27 Drywall T-Square with silver anodised finish and black epoxy painted imperial graduations for long wear and legibility. The length allows easy use on a standard 48in board. Features imperial graduations.

Size: 48 x 22in.

PTDM/T27

The R.S.T. Drywall Putty Knife with a soft touch handle for increased user comfort. Available with stiff or flexible blades up to 150mm/6in wide.

Stiff blade.

Size: 5cm (2 inch).

PTDRST5515S

Marshalltown wooden handle with threaded end adaptor for use with M26 and M26A Swivel Pole Sanders.

Size: 1.2m (48in).

PTDM/T28

M22 Drywall Utility Saw has a heavy gauge blade securely attached to a contoured hardwood handle with ferrule. Cuts wallboard, masonite, plywood and wood.

Size: 150mm (6in).

PTDM/T22

Widely used by tradesmen in the Dry Wall and suspended ceiling industries, stilts are both a time and labour saving tool. They are designed to eliminate the use of ladders and steps in many building and decorating tasks.

To help maintain your Faithfull stilts in a safe working order, this service pack containing essential spare parts is available.

The Faithfull FAISTILTSSP pack includes the following items:
2 x Heel Straps.
2 x Leg straps.
2 x Toe straps.
4 x Butterfly Leg Adjusting Bolts.

PTDFAISTILTSSP

The Wonder Mitre is a mitre guide that has been designed to handle the convex surface of coving. It has specially shaped notches that grip the coving, holding it fast. Providing the walls are square, very little finishing will be required.

Suitable for coving up to 127mm (5in).

Trade (Steel).

PTDMISWMT

Hand Scarifier for the preparation of drywall surfaces to help keying of plaster.
The tines are heat-treated and they come with a plastic handle.

Size 200mm (8 in)

PTDM/T722

This R.S.T. Hand Sander has a soft touch handle to provide comfort and a secure grip. The abrasive paper is held securely by a metal clamping plate at each end, and its large handle maximises control and efficiency.

Size: 9.1/2 x 3.1/4in.

PTDRST8185

A heavy-duty textured brush with rubber bristles for creating a stippling effect and other patterns associated with textured coating. Will wash out easily under cold water immediately after use.

PTDFAITEXT86

The Marshalltown 20D Hand Sander is lightweight and is fitted with an exclusive one-piece handle clamp that holds paper firmly and makes changing paper easy.

It has a bonded foam pad and DuraSoft handle, and is designed for pre-cut or half sheet standard sandpaper.

PTDM/T20D

This Marshalltown jointing knife is made from heat-treated, hardened and tempered annealed steel for an even hardness throughout the blade.

It has a full tang throughout the handle, with a hammer end.

The Marshalltown M-T5743 Joint knife has the following dimensions:
Size: 100mm (4 inch)

PTDM/T5743

This Marshalltown jointing knife is made from heat-treated, hardened and tempered annealed steel for an even hardness throughout the blade.

It has a full tang throughout the handle, with a hammer end.

The Marshalltown M-T5763 Joint knife has the following dimensions:
Size: 150mm (6 inch)

PTDM/T5763

The Marshalltown Taping Knives are available with either a blue steel flexible blade or a stainless steel blade.

They are fitted with a comfortable DuraSoft handle, and are primarily used for smoothing jointing tape in drywall applications.

The Marshalltown M3508D Taping Knife is made from blued steel.

Size: 200 x 75mm (8 x 3in).

PTDM/T3508D

The R.S.T. Drywall Putty Knife with a soft touch handle for increased user comfort. Available with stiff or flexible blades up to 150mm/6in wide.

Flexible blade.

Size: 5cm (2 inch).

PTDRST5515F

The R.S.T. Drywall Putty Knife with a soft touch handle for increased user comfort. Available with stiff or flexible blades up to 150mm/6in wide.

Flexible blade.

Size: 7.6cm (3 inch).

PTDRST5518F