Diamond Whetstones

The Trend DWS/CP8/FC is a Double-sided site and workshop bench stone, ideal for up to 3 inch plane irons and chisels. The unique clearance channels produce faster, cleaner cut with precision flatness and unique diamond shaped surface prevents snagging when sharpening small or pointed tooling.

Grades are marked on stone, Fine 1000 grit (15 micron) and coarse 300 grit (50 micron) and is guaranteed for five years. Recommended use with Trend lapping fluid to prevent clogging or rusting and assist in keeping tools clean - use with no pressure.

Ideal for flattening chisels and plane blades as well as achieving a shaving edge in seconds, the precision flatness gives the ability to also sharpen spindle knives in house.

Complete with pouch, cleaning block and non-slip mat.

PTDTREDWSCP8FC

Trend FAST TRACK Replacement Stones are made from monycrystalline diamond with a unique diamond cross relief pattern for optimal abrasion rates. This helps to maximise sharpening efficiency and reduce clogging. Diamonds are held by nickel plating to a steel substrate, with ABS plastic base.

This Trend FTS/S/P FAST TRACK Replacement Stone has the following specification:

Grade: Extra Coarse
Grit: 220 (nom. 60 micron)
Dimensions: 68.5 x 25.4 x 3.6mm
Colour: Black

PTDTREFTSSP

Trend FAST TRACK Replacement Stones are made from monycrystalline diamond with a unique diamond cross relief pattern for optimal abrasion rates. This helps to maximise sharpening efficiency and reduce clogging. Diamonds are held by nickel plating to a steel substrate, with ABS plastic base.

This Trend FTS/S/R FAST TRACK Replacement Stone has the following specification:

Grade: Extra Extra Coarse
Grit: 100 (nom. 60 micron)
Dimensions: 75 x 24 x 4mm
Colour: Grey

PTDTREFTSSR

Portable hand operated honing system giving guaranteed razor fine edges every time. It is easy and safe to use with no set up time required. The unique lateral sharpening action gives superb finished edge.

It is built to last, machined in solid aluminium and anodised. It uses quick change magnetic lock diamond sharpening stones and the carriage runs on nylon 66 slip rails for a smooth action. Can be used with lapping fluid.

Replacement stones available.

PTDGRPTREFTSKIT

The Stanley STA0-16-144 Hand held diamond sharpening stone is suitable for a range of general sharpening tasks including knives, chisels, scissors, shears etc. The two sided (coarse and fine grit) stone stores easily in the handle for convenience and its course and smooth grits make it the idea tool for precise sharpening.

PTDSTA016144

Faithfull selection of top quality diamond bench stones, offering the ultimate in sharpening technology. Each stone has a multiple layer of diamonds and a continuous diamond pad for sharpening small tools.

The 150mm stones are supplied in a plastic non-slip base with a clear cover.
The 300mm stones are supplied in a wooden storage case.

PTDGRPFAIDW150F

The Faithfull Diamond stones will sharpen steel, HSS and tungsten carbide tools and may also be used to abrade glass, ceramic tiles and porcelain. Diamond stones may be used dry or with water as a lubricant.

Always dry the stone after use and before storing. Clean the stone occasionally, using soapy water and a soft brush.

A 4-sided diamond sharpening stone supplied with a worksafe surface gripping base for quick, easy and effortless sharpening of any blade.
Grits: Fine (red) 600 grit, Medium (green) 400 grit, Coarse (yellow) 300 grit and Extra Coarse (blue) 200 grit.

PTDFAIDWQUAD

Ready to go 3 in credit card size diamond sharpener with convenient vinyl colour coded carrying case. Fits easily in pocket or wallet.
Size 83 x 51mm.

PTDGRPDMTD3E

Diamond paddles with an easy access tongue, and specially designed handle for comfort and ease of use.
The sharpening area measures 63 x 20 x 0.75mm. (2.1/2 x 3/4 x 1/32in).
The overall length length is 178mm (7in).

PTDGRPDMTD2E

The DMT D9 Diamond sharpening bench whetstone has non-slip feet and will not break, chip, crack, hollow or groove. The D6 whetstone is made from the hardest material which is one of the most efficient sharpening abrasive. Available in unique interrupted surface and continuous surface, light pressure produces a sharp edge with just a few strokes.
Use water for lubrication no oil, smell or mess and can hone ALL hard materials: carbide, steel, etc. and is supplied with Non-skid mat.

Precision, continuous monocrystalline diamond bench whetstones with rubber feet. The grit size is etched into the side of the whetstone. The grits are denoted by a dual coloured circle which is set into one end.

Blue: Coarse Grade 325, 45 micron.
Red: Fine Grade 600, 25 micron.
Green: Extra Fine Grade 1200, 9 micron.

PTDGRPDMTD6E

Faithfull selection of top quality diamond bench stones, offering the ultimate in sharpening technology. Each stone has a multiple layer of diamonds and a continuous diamond pad for sharpening small tools.

The 150mm stones are supplied in a plastic non-slip base with a clear cover.
The 300mm stones are supplied in a wooden storage case.

The Faithfull FAIDW300C diamond bench stone has the following specifications:

Size: 300 x 65mm.
Grit: 300, Coarse.

PTDFAIDW300C

The 150mm (6in) W6 Diamond Whetstones are ideal for kitchen use and for the honing of smaller workshop tools. They have a large, wider diamond surface for sharpening a variety of knives and edges. Supplied in a plastic case fitted with non-skid rubber feet or wooden box, the base of the plastic case may be screw mounted to a bench.

Black: Extra Coarse Grade 220, 60 micron.
Blue: Coarse Grade 325, 45 micron.
Red: Fine Grade 600, 25 micron.
Green: Extra Fine Grade 1200, 9 micron.

PTDGRPDMTW6EP

The W7 Mini Diamond Whetstone can be used to sharpen, hone or file any hard material. Unbreakable, unbendable, and convenient to carry.

Handy Mini Whetstone 70 x 25 x 5mm thick.

No messy oils needed, sharpen dry or with water. Durable construction will provide years of consistent performance and reliable service

PTDGRPDMTW7E

W8 Diamond Whetstones 200mm (8 in) are ideal for kitchen use and for the honing of smaller workshop tools. They have a large, wider diamond surface for sharpening a variety of knives and edges. They are supplied with a non-skid hardwood case, and tabs for permanent mounting are moulded into the stones base.

Black: Extra Coarse Grade 220, 60 micron.
Blue: Coarse Grade 325, 45 micron.
Red: Fine Grade 600, 25 micron.
Green: Extra Fine Grade 1200, 9 micron.

PTDGRPDMTW8E

The ultimate tool for maintained razor edges, even on hard stainless blades. For the food service and meat processing industries.

Long wearing monocrystalline diamond surface.
Solid steel round rod for maximum diamond surface.
Large Safety Guard.
Colour coded hang ring for identification.
High impact resin handle.

PTDGRPDMTDS2E