Angle Grinders - 125mm Disc

The Metabo WQ1400-125 Mini Grinder with Tacho-Constamatic (TC) Full Wave Electronics, for fast work progress by means of constant speed under load. The S-Automatic mechanical safety clutch minimises kick-back to the lowest level if the disc jams unexpectedly, for maximum user protection and swift progress.

Fitted with a Metabo marathon motor, that has a patented dust protection design for long service life with auto-stop carbon brushes to protect the motor. Metabo Quick for tool-free disc change by means of a quick-locking nut. Also supplied with a tool-free adjustable guard that is twist-proof, preventing accidental removal.

Specification

Input Power: 1,400W.
No Load Speed: 10,500/min.
Torque: 3.3Nm.
Disc Diameter: 125mm.
Spindle: M14.
Cable Length: 3.9m.
Weight: 1.9kg.

PTDGRPMPTWQ1400

The Makita GA5021C Angle Grinder has the following features:

- Constant spped control under load.
- Soft start.
- Double insulated.

Technical specification :

No load speed : 10,000 rpm.
Spindle Size : M14 x 2mm.
Max Wheel Diameter : 125 mm.
Vibration K factor : 1.5 m/sec.
Vibration artificial wheel : 8.5 m/sec.
Input wattage : 1,450 watts.
Noise sound power : 101 dB(A).
Noise sound pressure : 90 dB(A).
Noise K factor : 3 dB(A).
Net weight : 2.5 kg.
Bore : 22 mm.

Supplied with:

Side handle.
Lock nut wrench.
Wheel guard.

PTDMAKGA5021CL

The Makita GA5021 125mm Angle Grinder has a large type switch trigger and Super Joint System that uses unique techonology to reduce and asorb vibration in the tool. The tool is double insulated for increased user protection.

It is supplied with a side handle, lock nut wrench and a wheel guard.

Specification

Input Power: 1,050W
No Load Speed: 11,000/min.
Wheel Size: 125 x 22mm Bore
Spindle Size: M14 x 2mm.
Weight: 2.5kg

All vibration figures quoted are Tri-axial to EN60745 2006.

Vibration K Factor: 1.5 m/sec.
Vibration Artificial Wheel: 13.5 m/sec.
Noise Sound Power: 101 dB(A).
Noise Sound Pressure: 90 dB(A).
Noise K Factor: 3 dB(A).

PTDMAKGA5021L

The Sparky M 1050 Angle Grinder has a robust, high performance motor with optimum motor cooling for an extended tool life. In addition, the angle grinder has full dust protection, with dust sealed bearings and a protection cap to further extend its life. For comfortable handling, the angle grinder has slim housing, and an anti-vibration side handle and anti-burst anti-rotation tool less blade guard.

Comes with: 1 x 125mm Safety Guard, 1 x Anti-Vibration Side Handle, 1 x Support Washer, 1 x Lock Nut and 1 x Lock Nut Spanner.

Disc NOT included.

Specification

Input Power: 1,050 Watt.
No Load Speed: 10,000/min.
Disc: 125mm.
Spindle Thread: M14.
Weight: 2.3kg.

Sparky M 1050 125mm Angle Grinder 110 Volt Version

Disc NOT included.

PTDSPKM1050L

The Sparky M 1300 Long Handled Angle Grinder has a robust, powerful motor with optimum ventilation for an extended tool life. In addition the angle grinder has a powder coated rotor and stator for efficient dust protection, a protection basket for rotor winding against sharp grinding dust, and dust sealed bearings to further extend its life. For comfortable handling, the angle grinder has a long rear, and an anti-vibration, 3-position side handle and anti-burst anti-rotation tool less blade guard.

For safety, the Sparky M 1300 Long Handled Angle Grinder has the following features:
-Safety switch to prevent accidental switching on, lock-on function and switching off.
-Auto-stop brushes.
-Double insulation.
-Spindle lock button for disc replacement.
-Quick-release disc guard.

Supplied with: 1 x 125mm Anti-Burst, Anti-Rotation Safety Guard, 1 x Anti-Vibration Side Handle, 1 x Support washer, 1 x Lock Nut and 1 x Lock Nut Spanner.

Disc not included.

Specification

Input Power: 1,300 Watt.
No Load Speed: 9,500/min.
Disc: 125mm.
Spindle Thread: M14.
Weight: 3.6kg.

Sparky M 1300 125mm Long Handled Angle Grinder 1300 Watt 240 Volt Version.

PTDSPKM1300

The Sparky M 1300 Long Handled Angle Grinder has a robust, powerful motor with optimum ventilation for an extended tool life. In addition the angle grinder has a powder coated rotor and stator for efficient dust protection, a protection basket for rotor winding against sharp grinding dust, and dust sealed bearings to further extend its life. For comfortable handling, the angle grinder has a long rear, and an anti-vibration, 3-position side handle and anti-burst anti-rotation tool less blade guard.

For safety, the Sparky M 1300 Long Handled Angle Grinder has the following features:
-Safety switch to prevent accidental switching on, lock-on function and switching off.
-Auto-stop brushes.
-Double insulation.
-Spindle lock button for disc replacement.
-Quick-release disc guard.

Supplied with: 1 x 125mm Anti-Burst, Anti-Rotation Safety Guard, 1 x Anti-Vibration Side Handle, 1 x Support washer, 1 x Lock Nut and 1 x Lock Nut Spanner.

Disc not included.

Specification

Input Power: 1,300 Watt.
No Load Speed: 9,500/min.
Disc: 125mm.
Spindle Thread: M14.
Weight: 3.6kg.

Sparky M 1300 125mm Long Handled Angle Grinder 1300 Watt 110 Volt Version.

PTDSPKM1300L

The Makita GA5021C Angle Grinder has the following features:

- Constant spped control under load.
- Soft start.
- Double insulated.

Technical specification :

No load speed : 10,000 rpm.
Spindle Size : M14 x 2mm.
Max Wheel Diameter : 125 mm.
Vibration K factor : 1.5 m/sec.
Vibration artificial wheel : 8.5 m/sec.
Input wattage : 1,450 watts.
Noise sound power : 101 dB(A).
Noise sound pressure : 90 dB(A).
Noise K factor : 3 dB(A).
Net weight : 2.5 kg.
Bore : 22 mm.

Supplied with:

Side handle.
Lock nut wrench.
Wheel guard.

PTDGRPMAKGA5021C

The Sparky M 1050 Angle Grinder has a robust, high performance motor with optimum motor cooling for an extended tool life. In addition, the angle grinder has full dust protection, with dust sealed bearings and a protection cap to further extend its life. For comfortable handling, the angle grinder has slim housing, and an anti-vibration side handle and anti-burst anti-rotation tool less blade guard.

Comes with: 1 x 125mm Safety Guard, 1 x Anti-Vibration Side Handle, 1 x Support Washer, 1 x Lock Nut and 1 x Lock Nut Spanner.

Disc NOT included.

Specification

Input Power: 1,050 Watt.
No Load Speed: 10,000/min.
Disc: 125mm.
Spindle Thread: M14.
Weight: 2.3kg.

PTDGRPSPKM1050

The Sparky M 1300 Long Handled Angle Grinder has a robust, powerful motor with optimum ventilation for an extended tool life. In addition the angle grinder has a powder coated rotor and stator for efficient dust protection, a protection basket for rotor winding against sharp grinding dust, and dust sealed bearings to further extend its life. For comfortable handling, the angle grinder has a long rear, and an anti-vibration, 3-position side handle and anti-burst anti-rotation tool less blade guard.

For safety, the Sparky M 1300 Long Handled Angle Grinder has the following features:
-Safety switch to prevent accidental switching on, lock-on function and switching off.
-Auto-stop brushes.
-Double insulation.
-Spindle lock button for disc replacement.
-Quick-release disc guard.

Supplied with: 1 x 125mm Anti-Burst, Anti-Rotation Safety Guard, 1 x Anti-Vibration Side Handle, 1 x Support washer, 1 x Lock Nut and 1 x Lock Nut Spanner.

Disc not included.

Specification

Input Power: 1,300 Watt.
No Load Speed: 9,500/min.
Disc: 125mm.
Spindle Thread: M14.
Weight: 3.6kg.

PTDGRPSPKM1300

The Makita GA5021C Angle Grinder has the following features:

- Constant spped control under load.
- Soft start.
- Double insulated.

Technical specification :

No load speed : 10,000 rpm.
Spindle Size : M14 x 2mm.
Max Wheel Diameter : 125 mm.
Vibration K factor : 1.5 m/sec.
Vibration artificial wheel : 8.5 m/sec.
Input wattage : 1,450 watts.
Noise sound power : 101 dB(A).
Noise sound pressure : 90 dB(A).
Noise K factor : 3 dB(A).
Net weight : 2.5 kg.
Bore : 22 mm.

Supplied with:

Side handle.
Lock nut wrench.
Wheel guard.

PTDMAKGA5021C

The HiKOKI G13SE2 Mini Angle Grinder has a powerful motor with excellent overload durability. The coated coil armature provides superior resistance to dust abrasion. Other features include: a quick-release wheel guard, 2-position side handle and a spindle lock.

Supplied with: 1 x Abrasive Wheel, 1 x Wrench, 1 x Side Handle.

Specification:

Input Power: 240V: 1,200W, 110V: 1,050W
No Load Speed: 240V: 11,000/min., 110V: 10,000/min.
Disc Diameter: 125mm
Spindle: M14 x 2
Weight: 1.9kg

1 x HiKOKI G13SE2/J1 Mini Angle Grinder 125mm 240V version.

PTDHIKG13SE2

The HiKOKI G13SE2 Mini Angle Grinder has a powerful motor with excellent overload durability. The coated coil armature provides superior resistance to dust abrasion. Other features include: a quick-release wheel guard, 2-position side handle and a spindle lock.

Supplied with: 1 x Abrasive Wheel, 1 x Wrench, 1 x Side Handle.

Specification:

Input Power: 240V: 1,200W, 110V: 1,050W
No Load Speed: 240V: 11,000/min., 110V: 10,000/min.
Disc Diameter: 125mm
Spindle: M14 x 2
Weight: 1.9kg

1 x HiKOKI G13SE2/J2 Mini Angle Grinder 125mm 110V version.

PTDHIKG13SE2L

The HiKOKI G13SE2 Mini Angle Grinder has a powerful motor with excellent overload durability. The coated coil armature provides superior resistance to dust abrasion. Other features include: a quick-release wheel guard, 2-position side handle and a spindle lock.

Supplied with: 1 x Abrasive Wheel, 1 x Wrench, 1 x Side Handle.

Specification:

Input Power: 240V: 1,200W, 110V: 1,050W
No Load Speed: 240V: 11,000/min., 110V: 10,000/min.
Disc Diameter: 125mm
Spindle: M14 x 2
Weight: 1.9kg

PTDGRPHIKG13SE2

The Batavia MAXXSERIES 125mm Angle Grinder is suitable for all grinding, roughing and cutting work. Fitted with a powerful 800W motor and an auxiliary handle that enables precision working. The handle can be fitted in 3 positions for maximum user comfort. For increased working flexibility the grinder is fitted with a 2m cable.

Specification:

Input Power: 800W
No Load Speed: 11,000/min.
Disc Diameter: 125mm
Disc Bore: 22.2mm
Spindle Fitting: M14
Weight: 2.05kg

PTDBAT7063387

The SPARKY M 1050E Angle Grinder has full dust protection for an extended tool life. The robust, high performance motor has a slim housing design for comfortable handling and is fitted with optimum motor cooling for a extended tool life and a lightweight magnesium alloy gearbox. All the bearings have been dust sealed with a protection cap.

This grinder has several safety features: a non-burst, anti-rotation safety guard, soft start with restriction of starting current, safety switch with lock on function and a safety restart cut-out. It is fitted with anti-vibration side handle and has a 4 meter rubber cable.

Comes with: 1 x 125mm Safety Guard for Grinding, 1 x Anti-Vibration Side Handle, 1 x Support Washer, 1 x Lock Nut and 1 x Lock Nut Spanner.

Specification

Input Power: 1,050 Watt.
No Load Speed: 3,000-10,000/min.
Disc Diameter: 125mm.
Spindle Thread: M14.
Weight: 2.4kg.

PTDSPK1050E