SDS Max Midsize Hammers

The Milwaukee 540S Combi SDS-Max Breaking Hammer is a 2 mode SDS-Max combi hammer, suitable for hammer drilling and chiselling. Its roto-stop and multi position chisel function give 12 different positions to optimise the working angle.

The Kango 540S has robust magnesium gear housing for tough environments, exact seat fitting of gear components and better cooling. Its safety clutch protects both the operator and machine if the drill bit jams. Low vibration construction enhances usage time per day, and a soft-grip main side handle provides comfort.

Supplied in a kitbox.

Specification:

Modes: Hammer Drill, Chisel.
Voltage: 110V.
Input Power: 1,100 Watt.
Impact Rate: 3,000/bpm with 7.5 Joules.
Capacity: Concrete: 40mm, Core: 105mm, Tunnel Bit: 65mm.
Toolholder: SDS-Max.
Weight: 6.3kg.

PTDMILKAN540SL

The Milwaukee Kango 545S Combi SDS-Max Breaking Hammer is a 2 mode SDS-Max combi hammer, suitable for hammer drilling and chiseling. Its roto-stop and multi position chisel function give 12 different positions to optimise the working angle.

The Kango 545S has a soft hammer mode to reduce blow energy for drilling/chiseling in sensitive materials. It has soft starting for a more precise start, and constant electronics for keeping the speed uniform even under load. A lock on switch provides more comfortable extended use.

The breaking hammer comes with an additional handle that can be fixed in 3 different positions. It has AVS (anti-vibration system) and soft-grip handles for additional comfort. A power light informs if electricity flows.

Supplied in a kitbox.

Specifications

Mode: Hammer Drill and Chisel.
Input Power: 1,300 Watt.
Impact Rate: 2,840/bpm with 8.5 Joules.
Capacity: Concrete: 45mm, Core: 100mm.
Weight: 6.3kg.

PTDMILKAN545SL

The Milwaukee Kango 750S SDS Max Combi Breaking Hammer (7kg class) is suitable for hammer drilling and chiseling. It has a powerful 1,550 Watt motor to ensure maximum power, yet maximum durability with effective heat dissipation.

The Kango 750S has a large, heavyweight striker delivering maxmimum impact energy. It has soft starting for a more precise start, and AVS (anti-vibration system) and soft-grip handles for additional comfort. The soft hammer mode reduces blow energy for more sensitive materials.

Supplied in a kitbox.

Specification

Modes: Hammer Drill, Chisel.
Input Power: 1,500 Watt.
Impact Rate: 2,740/bpm with 11.9 Joules.
Capacity: Concrete: 50mm, Core: 150mm.
Weight: 8.2kg.

PTDMILKAN750SL

The Bosch GBH 5-40 DCE 5kg SDS Max Combi Hammer is a fast all-rounder with a powerful impact mechanism and Vibration Control to ensure a more comfortable work, even in time-intensive applications. The patented setting wheel allows for variable adjustment of the speed and impact rate for optimum performance.

Also fitted with a patented, lockable switch for low-fatigue chiselling work, Constant Electronic, service display and standby display for maximum convenience, and a ball grommet for high movement radius and for preventing cable breaks.

Supplied with an auxiliary handle, carrying case, grease tube (ET no. 1 615 430 010) and a machine cloth.

Specification

Input Power: 1,150 Watt.
No Load Speed: 170-340/min.
Impact Rate: 1,500-3,050/bpm.
Impact Energy: 8.8 Joules.
Drilling Diameter: Concrete: Hammer Bits: 1240mm, Breakthrough Bits: 45-55mm, Core Cutters: 40-90mm.
Optimum Range: Concrete: Hammer Bits: 1832mm.
Weight: 6.8kg.

Noise/Vibration Information

Measured values determined according to EN 60745. Total vibration values (vector sum of three directions).

Chiselling

Vibration emission value ah: 7.5 m/s.
Uncertainty K: 1.5 m/s.

Hammer Drilling in Concrete

Vibration emission value ah: 10.5 m/s.
Uncertainty K: 1.5 m/s.

Bosch GBH 5-40 DCE 5kg SDS Max Combi Hammer 1150 Watt 240 Volt Version.

PTDBSHGBH540DCE

The Bosch GBH 5-40 DCE 5kg SDS Max Combi Hammer is a fast all-rounder with a powerful impact mechanism and Vibration Control to ensure a more comfortable work, even in time-intensive applications. The patented setting wheel allows for variable adjustment of the speed and impact rate for optimum performance.

Also fitted with a patented, lockable switch for low-fatigue chiselling work, Constant Electronic, service display and standby display for maximum convenience, and a ball grommet for high movement radius and for preventing cable breaks.

Supplied with an auxiliary handle, carrying case, grease tube (ET no. 1 615 430 010) and a machine cloth.

Specification

Input Power: 1,150 Watt.
No Load Speed: 170-340/min.
Impact Rate: 1,500-3,050/bpm.
Impact Energy: 8.8 Joules.
Drilling Diameter: Concrete: Hammer Bits: 1240mm, Breakthrough Bits: 45-55mm, Core Cutters: 40-90mm.
Optimum Range: Concrete: Hammer Bits: 1832mm.
Weight: 6.8kg.

Noise/Vibration Information

Measured values determined according to EN 60745. Total vibration values (vector sum of three directions).

Chiselling

Vibration emission value ah: 7.5 m/s.
Uncertainty K: 1.5 m/s.

Hammer Drilling in Concrete

Vibration emission value ah: 10.5 m/s.
Uncertainty K: 1.5 m/s.

Bosch GBH 5-40 DCE 5kg SDS Max Combi Hammer 1150 Watt 110 Volt Version.

PTDBSHGBH540DCL

The Bosch GBH 5-40 DCE 5kg SDS Max Combi Hammer is a fast all-rounder with a powerful impact mechanism and Vibration Control to ensure a more comfortable work, even in time-intensive applications. The patented setting wheel allows for variable adjustment of the speed and impact rate for optimum performance.

Also fitted with a patented, lockable switch for low-fatigue chiselling work, Constant Electronic, service display and standby display for maximum convenience, and a ball grommet for high movement radius and for preventing cable breaks.

Supplied with an auxiliary handle, carrying case, grease tube (ET no. 1 615 430 010) and a machine cloth.

Specification

Input Power: 1,150 Watt.
No Load Speed: 170-340/min.
Impact Rate: 1,500-3,050/bpm.
Impact Energy: 8.8 Joules.
Drilling Diameter: Concrete: Hammer Bits: 1240mm, Breakthrough Bits: 45-55mm, Core Cutters: 40-90mm.
Optimum Range: Concrete: Hammer Bits: 1832mm.
Weight: 6.8kg.

Noise/Vibration Information

Measured values determined according to EN 60745. Total vibration values (vector sum of three directions).

Chiselling

Vibration emission value ah: 7.5 m/s.
Uncertainty K: 1.5 m/s.

Hammer Drilling in Concrete

Vibration emission value ah: 10.5 m/s.
Uncertainty K: 1.5 m/s.

PTDGRPBSHGBH540DCE

The SPARKY BP 860CE SDS Max Rotary Hammer has two modes: Hammer Drilling and Chiselling. It is a highly efficent machine thanks to its optimisied pneumatic hammer mechanism and unique High Power Mode, that offers upto 12 Joules of impact energy. The drill has electronic speed pre-selection and constant electronics with soft start.

It has two LED indicators, one for protection against overload and the other for brush wear out (8 hours remaining). For safety it is fitted with a safety clutch, auto-stop brushes, double insulation and an anti-vibration system on rear and side handle.

Comes with: 1 x Carry Case, 1 x Anti-Vibration Auxiliary Handle, 1 x Depth Gauge, 1 x Tube of Grease and 1 x Cloth.

Specification

Input Power: 1,400 Watt.
No Load Speed: 120250/min.
No Load Speed in High Power: 280/min.
Impact Rate: 1,1702,435/bpm.
Impact Rate in High Power: 2,800/bpm.
Impact Energy: 10 Joules.
Impact Energy in High Power: 12 Joules.
Max Torque: 140Nm.
Capacity: Concrete: 52mm, Core Bits (TCT cutter only) Masonry: 140mm.
Weight: 8kg.

SPARKY BP 860CE SDS Max Rotary Hammer 240 Volt Version.

PTDSPKBP860CE

The SPARKY BP 860CE SDS Max Rotary Hammer has two modes: Hammer Drilling and Chiselling. It is a highly efficent machine thanks to its optimisied pneumatic hammer mechanism and unique High Power Mode, that offers upto 12 Joules of impact energy. The drill has electronic speed pre-selection and constant electronics with soft start.

It has two LED indicators, one for protection against overload and the other for brush wear out (8 hours remaining). For safety it is fitted with a safety clutch, auto-stop brushes, double insulation and an anti-vibration system on rear and side handle.

Comes with: 1 x Carry Case, 1 x Anti-Vibration Auxiliary Handle, 1 x Depth Gauge, 1 x Tube of Grease and 1 x Cloth.

Specification

Input Power: 1,400 Watt.
No Load Speed: 120250/min.
No Load Speed in High Power: 280/min.
Impact Rate: 1,1702,435/bpm.
Impact Rate in High Power: 2,800/bpm.
Impact Energy: 10 Joules.
Impact Energy in High Power: 12 Joules.
Max Torque: 140Nm.
Capacity: Concrete: 52mm, Core Bits (TCT cutter only) Masonry: 140mm.
Weight: 8kg.

PTDGRPSPKBP860CE

The Metabo KHE 5-40 SDS Max Combi Hammer has 2 functions - hammer drilling and chiselling. Fitted with a thumb wheel for pre selection of the speed and impact rate. Electronic soft start provides precise spot-drilling. Its low weight, die cast magnesium gear housing allows for optimum heat dissipation.

Metabos VibraTech (MVT) system comprises an integrated damping system and side handle, which help to reduce vibrations in order to protect the users health. The Vario-Tacho-Constamatic (VTC) system provides full wave electronics that allow for more sensitive work to be carried out, such as materials that require customised speeds whilst remaining constant under load.

For added safety it is fitted with the Metabo S-automatic safety clutch. A mechanical decoupling of the drive for safe working should the drill stop unexpectedly. It also acts as a wear indication for the carbon brushes.

Supplied with: 1 x Metabo VibraTech (MVT) Side Handle, 1 x Drilling Depth Guide, 1 x Lubricant for Tool Shank End, 1 x Duster and 1 x Plastic Carry Case.

Specification

Mode: SDS Hammer and Chiselling
Input Power: 1,010W
Impact Rate: 3,200/bpm, 7.5 Joules.
Max. Torque: 95Nm
Capacity: Concrete: 40mm, Core: 90mm
Weight: 6.2kg

PTDGRPMPTKHE540

The DEWALT D25481K SDS Max Rotary Hammer has a three-mode mechanism making it easy to change between each mode. The brushed motor is ideally suited to more demanding applications. Its ergonomic, slim line design makes it easy to access confined spaces. Fitted with a rubber, anti vibration handle to ensure maximum trigger time and to help reduce fatigue. The machine is fitted with an improved safety clutch.

Specification

Modes: Hammer Only/Rotary Only/Hammer and Rotary
Input Power: 1,050W
No Load Speed: 400/min.
Impact Rate: 3,150/bpm, 6.1 Joules
Capacity: Concrete 40mm, Core Bit: 109mm
Weight: 6.1kg

PTDGRPDEWD25481K

The DEWALT D25810K SDS Max Chipping Combination Hammer has a powerful brushed motor for high performance even in demanding applications. Low vibration ensures maximum trigger time and also reduces user fatigue. Fitted with a soft, rubber anti-vibration handle. It has an ergonomic, compact and slim design which offers easy access to confined spaces. Theres a chisel angle option which is easy to activate and use.

Specification

Modes: Hammer/Chisel.
Input Power: 1050 Watt.
Impact Rate: 3,150/bpm, 7.1 Joules.
Weight: 5.6kg.

PTDGRPDEWD25810K

The Milwaukee Kango 950S SDS Max Combi Breaking Hammer (10 Kg class) delivers an impressive 20 J blow energy for excellent breaking perfomance. It features DIGITRONIC fullwave electronics for precise power adjustment to application. Its powerful 1,700 Watt motor can tackle the toughest applications. Ideal for use with generators.

The Kango 950 comes with 3 handles - all with AVS (Anti-Vibration-System) and soft grip for comfortable and less tiring use. It features a soft hammer mode to reduce blow energy for drilling/chiseling in sensitive materials. The in-line motor design provides additional comfort in below waist applications. An automatic lubrication system and the all-metal gearcase ensures an enhanced service life.

Supplied in a kitbox.

Specifications

Modes: Hammer Drill, Chisel.
Input Power: 1,700 Watt.
Impact Rate: 975-1,950/bpm with 20 Joules.
Capacity: Concrete: 50mm, Core: 150mm, Tunnel Bit: 80mm.
Weight: 11.8kg.

Milwaukee Kango 950S SDS Max Combi Breaking Hammer 1700 Watt 240 Volt Version.

PTDMILKAN950S

The DEWALT D25614K SDS Max Combination Hammer is ideal for drilling anchors and fixing holes into concrete, brick and masonry up to 45mm in diameter. With electronic speed and impact energy control. It has a rotation stop mode with a lock-on switch for chiselling. The ergonomic, compact and slimline design maximises control and offers easy access to confined spaces. An anti-rotation system detects a loss of tool control and reacts by instantly cutting the power.

Tool Connect ready (tag is NOT included) provides the option for jobsite connectivity for inventory management.

Compatible with the Wireless Tool Control transmitter, which allows the tool to be wirelessly paired with another Wireless Tool Control device, such as a dust extractor, for automatic activation and shut down.

Specification:

Input Power: 1350W
No Load Speed: 190-380/min.
Impact Rate: 1,450-2,900/bpm
Impact Energy: 10.5 joules
Max. Drilling Diameter: 45mm
Max. Core Diameter: 125mm

PTDGRPDEWD25614K

The DEWALT D25810K SDS Max Chipping Combination Hammer has a powerful brushed motor for high performance even in demanding applications. Low vibration ensures maximum trigger time and also reduces user fatigue. Fitted with a soft, rubber anti-vibration handle. It has an ergonomic, compact and slim design which offers easy access to confined spaces. Theres a chisel angle option which is easy to activate and use.

Specification

Modes: Hammer/Chisel.
Input Power: 1050 Watt.
Impact Rate: 3,150/bpm, 7.1 Joules.
Weight: 5.6kg.

1 x DEWALT D25810K SDS Max Chipping Combination Hammer 240 Volt Version

PTDDEWD25810K

The DEWALT D25810K SDS Max Chipping Combination Hammer has a powerful brushed motor for high performance even in demanding applications. Low vibration ensures maximum trigger time and also reduces user fatigue. Fitted with a soft, rubber anti-vibration handle. It has an ergonomic, compact and slim design which offers easy access to confined spaces. Theres a chisel angle option which is easy to activate and use.

Specification

Modes: Hammer/Chisel.
Input Power: 1050 Watt.
Impact Rate: 3,150/bpm, 7.1 Joules.
Weight: 5.6kg.

1 x DEWALT D25810K SDS Max Chipping Combination Hammer 110 Volt Version.

PTDDEWD25810KL