Wera Insert Bit Holders

The Wera 897/4 IMP R Impaktor holder with retaining Ring Magnet for secure holding of screws up to 10in. Impaktor holder to cushion extreme impulse peaks, special torsion effect from the double-torsion spring, equipped with a ring magnet to easily hold longer and heavier screws, also ideal for above-head work, particularly suitable for use with impact drivers, the magnet can be retracted and in this way be disabled

Output: Suitable for bits with 1/4in hexagon head drive as per DIN 3126-C 6.3 and Wera Series 1

Design: Impaktor technology ensures an above-average service life even under extreme conditions thanks to a best possible utilisation of the material properties and optimally designed geometry (two coupled torsion zones that perform successively), fitted with retaining ring and magnet

Drive: 1/4in hexagon, suitable for power driven screwdrivers with DIN 3126-F 6.3, ISO 1173 chucks

PTDWER073990

Application: For 1/4in DIN 3126-C 6,3 (ISO 1173) hexagon insert bits and Wera Series 1

Design: With stainless steel sleeve, retaining ring, and strong permanent magnet

Drive: 1/4in hexagon, suitable for power tools with DIN 3126-F 6,3, ISO 1173 receiver

Magnetic bit holder for use with screwdriver bits.

1/4in Drive
1/4in Capacity

75 mm Length

PTDWER053455

Application: For 1/4in DIN 3126-C 6,3 (ISO 1173) hexagon insert bits and Wera Series 1

Design: With stainless steel sleeve, retaining ring, and strong permanent magnet

Drive: 1/4in hexagon, suitable for power tools with DIN 3126-F 6,3, ISO 1173 receiver

Magnetic bit holder for use with screwdriver bits.

1/4in Drive
1/4in Capacity

Carded

PTDWER073357

Application: For 1/4in DIN 3126-C 6,3 (ISO 1173) hexagon insert bits and Wera Series 1

Design: With stainless steel sleeve, retaining ring, and strong permanent magnet

Drive: 1/4in hexagon, suitable for power tools with DIN 3126-F 6,3, ISO 1173 receiver

Magnetic bit holder for use with screwdriver bits.

1/4in Drive
1/4in Capacity

Magnetic bit holder for use with screwdriver bits.

1/4in Drive
Length 50mm

PTDWER347100

Application: For 1/4in DIN 3126-C 6,3 und E 6,3 (ISO 1173) hexagon insert bits and Wera Series 1 and 4

Design: Rapidaptor easy-in, easy-out, rapid-spin, chuck-all, and single-hand technology, with strong permanent magnet

Capacity: 1/4in.
Shank: 1/4in.

Length 50mm

PTDWER052502

The WERA Rapidaptor with powerful ring magnet which holds up to 8in (200mm) screws, for easy use. Ideal for single hand or overhead use, or in tight spaces. Spring steel body for anti clogging in dusty environments. Easy press in auto bit lock and one hand bit change. For all drill drivers.

Specification

Capacity: 1/4in.
Hexagon Drive: 1/4in.
Length: 57mm.

PTDWER052490

The WERA Rapidaptor with powerful ring magnet which holds up to 8in (200mm) screws, for easy use. Ideal for single hand or overhead use, or in tight spaces. Spring steel body for anti clogging in dusty environments. Easy press in auto bit lock and one hand bit change. For all drill drivers.

Specification

Capacity: 1/4in.
Hexagon Drive: 1/4in.
Length: 57mm.

PTDWER073511

Application: For 1/4in DIN 3126-C 6,3 und E 6,3 (ISO 1173) hexagon insert bits and Wera Series 1 and 4

Design: Rapidaptor easy-in, easy-out, rapid-spin, chuck-all, and single-hand technology, with strong permanent magnet

Capacity: 1/4in.
Shank: 1/4in.

PTDWER073421

Rapidaptor BiTorsion Universal Bit Holder with Strong Permanent Magnet and Quick-Release Chuck fits for bits Wera Series 1 and 4.

Capacity: 1/4Inch.
Hexagon Drive: 1/4Inch.
Length: 75mm.

PTDWER053923

Rapidaptor BiTorsion Universal Bit Holder with Strong Permanent Magnet and Quick-Release Chuck fits for bits Wera Series 1 and 4.

Capacity: 1/4Inch.
Hexagon Drive: 1/4Inch.
Length: 75mm.

PTDWER073420

Application: For 1/4in DIN 3126-C 6,3 und E 6,3 (ISO 1173) hexagon insert bits and Wera Series 1 and 4

Design: Rapidaptor easy-in, easy-out, rapid-spin, chuck-all, and single-hand technology, with strong permanent magnet

Capacity: 1/4in.
Shank: 1/4in.

100 mm Length

PTDWER052504

Application: For 1/4in DIN 3126-C 6,3 (ISO 1173) hexagon insert bits and Wera Series 1

Design: With stainless steel sleeve, retaining ring, and strong permanent magnet

Drive: 1/4in hexagon, suitable for power tools with DIN 3126-F 6,3, ISO 1173 receiver

Magnetic bit holder for use with screwdriver bits.

1/4in Drive
1/4in Capacity

152mm

PTDWER053458

Application: For 1/4in DIN 3126-C 6,3 und E 6,3 (ISO 1173) hexagon insert bits and Wera Series 1 and 4

Design: Rapidaptor easy-in, easy-out, rapid-spin, chuck-all, and single-hand technology, with strong permanent magnet

Capacity: 1/4in.
Shank: 1/4in.

75 mm Length

PTDWER052503

The WERA Rapidaptor with powerful ring magnet which holds up to 8in (200mm) screws, for easy use. Ideal for single hand or overhead use, or in tight spaces. Spring steel body for anti clogging in dusty environments. Easy press in auto bit lock and one hand bit change. For all drill drivers.

Specification

Capacity: 1/4in.
Hexagon Drive: 1/4in.
Length: 57mm.

PTDGRPWER073511

Application: For 1/4in DIN 3126-C 6,3 und E 6,3 (ISO 1173) hexagon insert bits and Wera Series 1 and 4

Design: Rapidaptor easy-in, easy-out, rapid-spin, chuck-all, and single-hand technology, with strong permanent magnet

Capacity: 1/4in.
Shank: 1/4in.

PTDGRPWER052502